Hi All:
Just wondering if this was released.. If so, I cannot find it.
de W4CCS
On 5/8/2012 10:59 AM, Wayne Burdick wrote:
Just a reminder: There will be further improved K3 firmware available
later today. It will allow NR and autonotch at all settings, and will
fix the audio-dropout
Short version: It's still in the kitchen.
Long version:
This is still in pre-beta, being evaluated by a goodly number of hams
who volunteered to test it before all the cooties were cleaned out.
Some number of issues have been ferreted out, a couple serious, and
there were some deliberate
No thanks Guy. I'll just wait for the brave ones to work out all the
cooties..
Thanks
W4CCS
On 5/10/2012 11:32 AM, Guy Olinger K2AV wrote:
Short version: It's still in the kitchen.
Long version:
This is still in pre-beta, being evaluated by a goodly number of hams
who volunteered to
@mailman.qth.net
Sent: Tuesday, May 8, 2012 10:59:37 AM
Subject: Re: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
Just a reminder: There will be further improved K3 firmware available
later today. It will allow NR and autonotch at all settings, and will
fix the audio-dropout problem
...@elecraft.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Tuesday, May 8, 2012 10:59:37 AM
Subject: Re: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
Just a reminder: There will be further improved K3 firmware available
later today. It will allow NR and autonotch at all
Bill,
What!
You mean you don't want them to pass it through three or four levels of
management, design, Gant chart creation, quality control and documentation
before releasing it to the developers!
What are you? A bloated corporation hater?
Remember! We owe it to the stockholders to appear
Compared to the many others that have weighed in already, I am a few days
late taking a look at the new firmware. It may have been worth the wait.
In a nutshell, the new 4.50/2.74 works extremely well. I've been waiting
for my K3 to really be able to perform in deep pileups, like I had
Hi everybody
In evaluating the new firmware I use 2xK3, #791 #5752
*
*
*Initial conditions*:
Rx Eq flat on booths rigs
BW 700Hz, no CW roofing only 2.7KHz (5poles)
AGC DCY –Soft
AGC SLP -003
AGC FST -100
K3 #791 THR=14-17 (usually 14)
K3 #5752 THR=5-8 (usually 7)
Test:
single
Just a reminder: There will be further improved K3 firmware available
later today. It will allow NR and autonotch at all settings, and will
fix the audio-dropout problem some have reported.
Wayne
N6KR
__
Elecraft mailing list
Home:
: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
Just a reminder: There will be further improved K3 firmware available
later today. It will allow NR and autonotch at all settings, and will
fix the audio-dropout problem some have reported.
Wayne
N6KR
To my ears, this AGC change is a MAJOR improvement! It didn't
take any extensive testing to reach that conclusion. The
difference is immediately obvious.
As mentioned previously, with low values of slope and high values
of threshold, loud signals blank out with the current firmware
release,
On 5/7/2012 1:56 PM, Dave Hachadorian wrote:
To my ears, this AGC change is a MAJOR improvement! It didn't take
any extensive testing to reach that conclusion. The difference is
immediately obvious.
That's very good news. Possibly a beta release this week or maybe next,
I hope.
73,
Fred
On Mon, May 7, 2012 at 3:56 PM, Dave Hachadorian k...@arrl.net wrote:
Thanks for working on this issue!
=
This is a real-life example of a terrific attitude toward customer
satisfaction. When this issue was first raised, the company could have been
defensive and simply asserted that
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony Estep
Sent: 07 May 2012 22:42
To: Elecraft
Subject: Re: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
On Mon, May 7, 2012 at 3:56 PM, Dave Hachadorian k...@arrl.net wrote:
Thanks for working
Now if we could convince ANY vehicle manufacturer to have the same attitude,
designers that are also mechanics (without the need for an MSEE)... Maybe
we'd have a chance to work under the hood again like we can with Elecraft.
Rick wa6nhc :o)
-Original Message-
From: Doug Turnbull
It
I cannot seem to locate where to download this; I can only see 4.48, no
Beta...
Clues for the clueless?
Thanks and 73 de Dave, W5SV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I think Wayne's post indicated it would be released as a beta in the
next week or so once the field test reports were in and they were
satisfied with it. It sure sounds like a really good job on the AGC, I
guess patience is in order ... I know, hard for this list and these
products. :-)
73,
Sent: Monday, May 07, 2012 5:00 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
I cannot seem to locate where to download this; I can only see 4.48, no
Beta...
Clues for the clueless?
Thanks and 73 de Dave, W5SV
I just talked to Lyle. Looks like by tomorrow we'll have a version of
DSP code that allows NR and autonotch to be used at all threshold
settings, and fixes the high-signal issue some had reported.
I'll send it out to everyone who got the last test version.
Wayne
N6KR
Fred Jensen wrote:
I
We in the IT business call it Alpha and you don't send it to anybody
who can't figure out how to fix a broken system. In this case it's
pretty easy, reset the radio and reload a backed up FW and config.
I would call what Wayne is doing this time Beta and when it is released
on the website for
Great!
I have sent the SW to about 5 people.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 5/7/2012 5:59 PM, Wayne Burdick wrote:
I just talked to Lyle. Looks like by tomorrow we'll have a version of
DSP code that allows NR and autonotch to be used at all threshold
settings, and fixes the
As a retired software developer, what amazes me is the way Wayne
and company are performing their beta test. No NDA. It looks
like almost anyone can sign up. Problems and future intentions
are discussed in a public forum. I am blown away that a company
would act this way. It is very
-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David F. Reed
Sent: Monday, May 07, 2012 5:00 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
I cannot seem to locate where to download this; I can only see 4.48
Bill,
True, true -- but the situation with the KX3 is different than what has
transpired with previous products.
Previously, the conversations of the Field Testers have been on a
private forum. While that is still true with the KX3, there is a lot
more information that is in the open. My
Making a great rig even better. Totally stoked to play with the radio with the
new firmware.
To my ears, this AGC change is a MAJOR improvement! It didn't
take any extensive testing to reach that conclusion. The
difference is immediately obvious.
As mentioned previously, with low
Sorry, I was responding to the wrong post.
While the content is valid for what it is, it is in response to a post
on the KX3 Yahoo Group, and has nothing to do with the K3 AGC.
73,
Don W3FPR
On 5/7/2012 10:53 PM, Don Wilhelm wrote:
Bill,
True, true -- but the situation with the KX3 is
On May 7, 2012, at 10:42 PM, Guy Olinger K2AV wrote:
Beta Beta.
Meaning, I presume, it's a beta Beta than the first Beta.
Well, I guess we beta that to death
Bud, W2RU
__
Elecraft mailing list
Home:
Software developers call it alpha. Greek alphabet ya know -- alpha,
beta, gamma... I guess gamma must be the production release.
David K0LUM
At 10:42 PM -0400 5/7/12, Guy Olinger K2AV wrote:
Beta Beta.
On Mon, May 7, 2012 at 7:50 PM, Cady, Fred fc...@ece.montana.edu wrote:
Hi Dave,
It's
*Without the radiation I hope..:-)
gary
*
On 8 May 2012 13:18, David Christ radio...@mchsi.com wrote:
Software developers call it alpha. Greek alphabet ya know -- alpha,
beta, gamma... I guess gamma must be the production release.
David K0LUM
At 10:42 PM -0400 5/7/12, Guy Olinger K2AV
Not to worry. Your comments are a fine description of why in
exchange for openness on the part of the vendor, the customers
(we) need to exhibit patients when the inevitable things go
wrong and things take longer than everyone hoped.
Cheers - Bill, AE6JV
On 5/7/12 at 19:58,
, and Operation
www.ke7x.com
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David F. Reed
Sent: Monday, May 07, 2012 5:00 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] K3 AGC improvements (MCU rev 4.50 / DSP 2.74)
I cannot
31 matches
Mail list logo