Hello to the group.
I must be missing something in the manual...
If I use the K3 (and 2nd receiver) with the radio TX on the main, but RX on
the sub receiver that is connected to the antenna via the BNC RX antenna
(with the SUB indicated on the display) is the PR6 pre-amp in line with the
sub
Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andy GD0TEP
Sent: Thursday, April 02, 2009 5:57 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 and PR6 question
Hello to the group.
I must be missing something in the manual...
If I use
OK Bud, that answers that question then... thanks.
73 Andy
http://www.gd0tep.com
-Original Message-
From: Bud Semon N7CW [mailto:n...@cableone.net]
Sent: 02 April 2009 14:57
To: 'Andy GD0TEP'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 and PR6 question
Hi Andy
GD0TEP'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3 and PR6 question
Hi Andy,
There was a fairly long discussion between Wayne, W0MU and myself on this
subject, mostly on the reflector. The answer was no - you can't use the PR6
(as installed on the radio) inline on the 2nd receiver
April 2009 15:45
To: elecraft@mailman.qth.net; 'Andy GD0TEP'
Subject: Re: [Elecraft] K3 and PR6 question
I suppose if you REALLY wanted to do this you could use a second PR6 and
run your
RX ant to the PR6 input and the output connected to the AUX RF connector if
its
installed and KRX3 set
To: elecraft@mailman.qth.net; 'Andy GD0TEP'
Subject: Re: [Elecraft] K3 and PR6 question
I suppose if you REALLY wanted to do this you could use a second PR6 and
run your
RX ant to the PR6 input and the output connected to the AUX RF connector if
its
installed and KRX3 set to BNC. Then usinging
OK Greg, I'll be trying this tonight when I'm at the shack.
73 Andy
http://www.gd0tep.com
-Original Message-
From: Greg - AB7R [mailto:a...@cablespeed.com]
Sent: 02 April 2009 16:21
To: 'Andy GD0TEP'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and PR6 question
Yes, that I
But you can use the PR6 in-line between a 6-m receiving antenna and the
sub's AUX RF input if you switch it in/out with an external signal.
73,
Wayne
N6KR
On Apr 2, 2009, at 6:56 AM, Bud Semon N7CW wrote:
Hi Andy,
There was a fairly long discussion between Wayne, W0MU and myself on
this
I use a 1/4-wave 6M GP connected to (only) the 2nd receiver's
antenna input via the added BNC antenna connector. This lets
me listen for activity and if the band opens I can then switch the
radio to the main 6M antenna that's connected to the ANT 2
connector. The PR6 is then available via the
]
Sent: 02 April 2009 15:45
To: elecraft@mailman.qth.net; 'Andy GD0TEP'
Subject: Re: [Elecraft] K3 and PR6 question
I suppose if you REALLY wanted to do this you could use a second PR6 and
run your
RX ant to the PR6 input and the output connected to the AUX RF connector if
its
installed
receiver. Thanks Eric.
73 Andy
http://www.gd0tep.com
-Original Message-
From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com]
Sent: 02 April 2009 18:19
To: a...@cablespeed.com
Cc: 'Andy GD0TEP'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 and PR6 question
I do not find
11 matches
Mail list logo