To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 mod for K-Pod level of difficulty
For me the hassle is I power the P3 from the K3s. Unfortunately, my
K3s serial # is 10622, so I need to do the mod or have the extra
wires on my desk. It would be nice if a 9V battery could be placed
inside
For me the hassle is I power the P3 from the K3s. Unfortunately, my
K3s serial # is 10622, so I need to do the mod or have the extra
wires on my desk. It would be nice if a 9V battery could be placed
inside as a powering option.
73,
Gary
KA1J
> Any K3S later than serial number 10787 (kit) or
The mod simply allows more current to be drawn from an otherwise unused
pin on an otherwise unused connector while still affording protection to
the power supply within the radio (protection from a short on the
connector pin).
73,
Lyle KK7P
On 6/29/16 8:04 PM, Clay Autery wrote:
Apologize
Apologize if this question has already been asked/answered.
I have K3s #106xx, so I need the mod.
Is there any downside to making the mod (other than risk). I mean, is
there any chance of it affecting TX/RX quality, et al?
Assuming not; just checking...
73,
__
Clay Autery,
o:elecraft-boun...@mailman.qth.net] On Behalf Of
lmarion
Sent: Wednesday, June 29, 2016 4:23 PM
To: Dauer, Edward; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 mod for K-Pod level of difficulty
Any one who can show pictures and advise me on the K3S mod would be a big
help. I have had a st
Any one who can show pictures and advise me on the K3S mod would be a big
help. I have had a stroke since building the K2 100, and every thing else
Elecraft has ever made.
And it took my dominant right side to boot. So I am debating whether to
send it to Elecraft for the mod or if I am able
6 matches
Mail list logo