move" should remove the offset.73 HenkPA0C
Oorspronkelijk bericht Van: jerry Datum:
23-08-2021 16:01 (GMT+01:00) Aan: elecraft@mailman.qth.net Onderwerp: Re:
[Elecraft] K3S audio quality issue [SOLVED] On 2021-08-22 19:45, Michael
Kholodov via Elecraft wrote:> If you ha
23-08-2021 16:01 (GMT+01:00) Aan: elecraft@mailman.qth.net Onderwerp: Re:
[Elecraft] K3S audio quality issue [SOLVED] On 2021-08-22 19:45, Michael
Kholodov via Elecraft wrote:> If you have the tuning step 10Hz, tune to, say,
7.200.56 and then> switch to coarse tuning, the display w
On 2021-08-22 19:45, Michael Kholodov via Elecraft wrote:
If you have the tuning step 10Hz, tune to, say, 7.200.56 and then
switch to coarse tuning, the display will show 7.200.5. But this 60Hz
offset will still be present. Then no matter how you tune at the
coarse setting, you will mistune. To
If you have the tuning step 10Hz, tune to, say, 7.200.56 and then switch to
coarse tuning, the display will show 7.200.5. But this 60Hz offset will still
be present. Then no matter how you tune at the coarse setting, you will
mistune. To fix that you should always reset the fine tuning offsets
lm
> To: Mike Kholodov, "elecraft@mailman.qth.net"
>
> Subject: Re: [Elecraft] K3S audio quality issue
> Message-ID:<5ed04b7d-17f4-e60b-64d9-d01b6741b...@w3fpr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Mike,
>
> Do you have the No
,"elecraft@mailman.qth.net"
Subject: Re: [Elecraft] K3S audio quality issue
Message-ID:<5ed04b7d-17f4-e60b-64d9-d01b6741b...@w3fpr.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Mike,
Do you have the Noise Blanker turned on?? That will create some
"strange&q
Swapping side bands can happen behind your back. I was part of a
multi-multi activating Kings County in the California QSO Party.
My assignment was 10M SSB. The first contact suggested I would
be more successful if I switched from LSB to USB. I have no idea
how I swapped the sideband. I guess
4TAX
On 8/19/2021 3:27 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 8
Date: Wed, 18 Aug 2021 12:07:36 -0400
From: Don Wilhelm
To: Mike Kholodov,"elecraft@mailman.qth.net"
Subject: Re: [Elecraft] K3S audio quality issue
Message-ID:<5ed04b7d-17f4-e60b-64d9-d01b6
pertaining to Crystal
Filter setup.
73
Bob, K4TAX
On 8/19/2021 3:27 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 1
Date: Tue, 17 Aug 2021 21:10:23 + (UTC)
From: Mike Kholodov
To:"elecraft@mailman.qth.net"
Subject: [Elecraft] K3S audio quality issue
Message-ID:<134621
Make sure you use USB for 20 meters and LSB for 40. SSB sounds awful if you
use the “wrong” sideband.
Also make sure the PBT has not shifted, it should be normally very close to
centered.
14 MHz and higher typically use USB, and lower frequencies typically use LSB.
Sorry if this sounds too
Mike,
That problem sounds a bit like the Calibration of the Reference
Oscillator is off a bit. See tha manual and use the Zero-Beating method
as instructed.
There is a chance it will help, but no harm if it does not.
If you did not get the paper manual, download it from Elecraft.
73,
Don
Hi Al,
I bought it used, so I'm not sure when exactly it started. All SSB stations
are sounding like mistuned ones, no matter how I tune the VFO. Sometimes it's
better (less artifacts) when it is a little bit lower, but it sounds unnatural.
AM seems to be fine. Of course, the first thing I
Hi, Mike,
This issue comes up regularly here.
It sounds like this is a new problem with the K3S? Or has it always been like
this?
There are so many settings that could have changed. You'd have to list them all
for us. I assume that you know about the receive equalizer, AFX, and DSP, all
of
Don,
no, all sound processing is off.
Mike, AB3VN
On Wednesday, August 18, 2021, 12:07:43 PM EDT, Don Wilhelm
wrote:
Mike,
Do you have the Noise Blanker turned on? That will create some
"strange" sounds in the audio.
73,
Don W3FPR
On 8/17/2021 5:10 PM, Mike Kholodov via Elecraft
Mike,
Do you have the Noise Blanker turned on? That will create some
"strange" sounds in the audio.
73,
Don W3FPR
On 8/17/2021 5:10 PM, Mike Kholodov via Elecraft wrote:
Listening to the K3S audio had become very fatiguing for me as of late. It
sounds like hum or carrier is mixed in at
Listening to the K3S audio had become very fatiguing for me as of late. It
sounds like hum or carrier is mixed in at the low end. It is very similar to
the sound, if you tune a little bit higher on USB. I checked the same stations
on my KX3, they sounded great. Used the same headphones in both
16 matches
Mail list logo
