Im using my K3s fot Ft8 and have the audio and monitor tuned of.
After aprox 30 - 40 mins I then start hearing the transmit through the
transceiver speaker not the sp3s.
Sent from my iPhone
__
Elecraft mailing list
Home:
Here’s a bit of peer-reviewed hard science I somehow missed. Also appeared in
Wall Street Journal, etc., but this podcast explains it better.
Listener discretion advised... not suitable for easily discouraged
next-generation listeners.
https://bit.ly/2ORWTrR
I hope they’re wrong.
Randy,
It is in the manual. AFX has been in the K3 since its beginning.
73,
Don W3FPR
On 8/21/2018 10:12 PM, Randy Farmer wrote:
Looks like I messed up and failed to read some of the firmware release
notes again. This is good news. I'll hunt it up and try it. Thanks for
the info.
Hmmm... My K3S has Firmware V5.62 (latest production) installed. As
describedin the latest available version of the K3S manual, the only AFX
MODE settings are DELAY 1 through DELAY 5 and BIN. PITCH is not an
option. Wayne's message refers explicitly to the KX3. Indeed, the KX3
manual shows the
That would be a very good thing, especially if the midpoint of the soundstage
followed the Pitch setting.
When wearing headphones, it would also be less tiring to use if the soundstage
had some “spaciousness” to it rather than signals appearing on a simple
straight line inside the skull from
We do not see any virus violations here when installing the latest version of
KPA1500 Remote on our W10 or Windows 8 machines. I'm using it to control the
KPA1500 amp at my home station from work.
Of course it always asks you to confirm first before allowing installation.
Eric
/elecraft.com/
Hi Lynn,
The interesting part is in the first 15 minutes. There's also a text
transcript. Search for "Show Transcript" at:
https://loe.org/shows/shows.html?programID=18-P13-00033
Wayne
> On Aug 21, 2018, at 5:34 PM, Lynn W. Taylor, WB6UUT
> wrote:
>
> For those of us who don't have
First off, A very big "Thank You" to everyone who signed up for the 2018 NJQRP
Skeeter Hunt, and extra special "Thanks" to all who participated. Without you,
this would be a non-event. You folks ARE THE BEST !!!
Log submissions are due by Midnight of Labor Day, September 3rd. You don't have
It’s working well here with Win 10
Tnx Eric
N2TK, Tony
From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com]
Sent: Tuesday, August 21, 2018 7:26 PM
To: N2TK, Tony ; 'Ed G' ;
elecraft@mailman.qth.net
Subject: Re: [Elecraft] New KPA1500 Remote Program
We do not see any virus
That sounds good to me. Thanks all for helping.
--Ed—
Sent from Mail for Windows 10
From: Mark Ethridge
Sent: Tuesday, August 21, 2018 7:55 PM
To: N2TK, Tony
Cc: Eric Swartz - WA6HHQ, Elecraft; Ed G; Elecraft Reflector
Subject: Re: [Elecraft] New KPA1500 Remote Program
6 out of 66 on
Hi all,
The KX3 has two different AFX (audio effects) modes: DELAY (simulated stereo)
and PITCH (binaural pitch mapping). DELAY is the default, and it can greatly
reduce operating fatigue as compared to mono audio.
PITCH is sometimes overlooked as an option, but it too can make listening more
6 out of 66 on virustotal would indicate a false positive. The well known
scanners didn't show anything. I would just disable avast while installing
or tell avast to whitelist the file.
de k4sne
On Tue, Aug 21, 2018 at 6:26 PM, N2TK, Tony wrote:
> It’s working well here with Win 10
>
> Tnx
I have the same issue with most Elecraft and other ham-related programs when
using Norton. The files get quarantined after downloading because they're
'suspect", typically due to "few users". There should be a setting in your
anti-virus program to get the file restored and "ignored" or "allowed".
This sounds extremely useful for contest pileup management. Will it also
be implemented for the K3?
73...
Randy, W8FN
On 8/21/2018 7:59 PM, Wayne Burdick wrote:
Hi all,
The KX3 has two different AFX (audio effects) modes: DELAY (simulated stereo)
and PITCH (binaural pitch mapping). DELAY is
Randy,
The AFX is already in the K3/K3X. Tap the AFX button to turn it on and
select the AFX mode that you want to use.
73,
Don W3FPR
On 8/21/2018 9:16 PM, Randy Farmer wrote:
This sounds extremely useful for contest pileup management. Will it also
be implemented for the K3?
Looks like I messed up and failed to read some of the firmware release
notes again. This is good news. I'll hunt it up and try it. Thanks for
the info.
73...
Randy, W8FN
On 8/21/2018 9:00 PM, Don Wilhelm wrote:
Randy,
The AFX is already in the K3/K3X. Tap the AFX button to turn it on
and
I have pointed my six element into aurora and bounced to other hams doing
the same thing. And bounced off of meteor scatter. I do not all the physics,
but I think ionized gas is our friend.
Leroy AB7CE
-Original Message-
From: Dauer, Edward
Sent: Tuesday, August 21, 2018 7:49 PM
To:
Hi Randy,
PITCH mode is not available on the K3 at this time. It was a bit of an
experiment when we added it to the KX3 (which uses a different DSP chip). We
liked it, and kept it.
It's on the list for future addition to the K3/K3S.
73,
Wayne
N6KR
> On Aug 21, 2018, at 7:38 PM, Randy
I wonder if those who understand the full physics of ionospheric phenomena and
their relationship to radio frequency propagation – which I do not – have
considered the coincidence of apparently unusual 6 meter openings with a
phenomenon called STEVE – Strong Thermal Emission Velocity
Yes I do the same + I try a "save config." B4 I upgrade anything.
Unfortunately my P3 probably needs a trip to California before any firmware
from any version of the utility on any architecture can be uploaded to it.
As usual Tech support has been fantastic - it's the findings I don't
The cesium and iridium clocks at National Institute of Standards and
Technology through WWV and WWVH broadcasts, provide the time signals to the
Global Positioning System satellites which without time signals to the Wide
Area Augmentation system from WWV & WWVH are not accurate for navigation
I had similar questions.
Use a cable with RCA jacks to connect the K3/K3S rear panel 12V DC OUT
RCA connector to the KPA1500 REM RCA connector to wake it up. You'll
still need something to change OPERATE/STANDBY on the KPA1500, but I
just use the KPA1500 utility over Ethernet.
The power output
Just download them and install.
73,
Don W3FPR
On 8/20/2018 12:38 AM, TL_Netvision wrote:
Hello all,
I want to install the K3, KPA500, KAT500 & P3 utilities on a Linux
mint-18.4 computer.
__
Elecraft mailing list
Home:
Bill,
The AUXBUS is NOT at fault.
The parts to concentrate on are shown in the lower left corner of sheet
2 of the KAT100 manual. Something there is not working reliably. My
first guess would be Q2, but it could be something else associated.
That entire powering circuit is controlled only
Hello,
Anyone else getting a virus hit when trying to install the KPA1500 Remote
program (ver 1.14)? I get a “filerepmalware” indication, and Avast moves the
exe file into the Avast file locker. I am running Win 10.
--Ed—
---
This email has been checked for viruses by Avast antivirus
Byron,
Yes, if you select anything other than the 2.7/2.8 filter for CW
transmit, you will receive an error.
73,
Don W3FPR
On 8/21/2018 4:48 PM, Byron Peebles wrote:
I would add that changing the TX FLT to something else generates an
error when I try to use it. 73, Byron
On 08/21/2018
Peter,
If you mount the KPA1500 power supply vertically, put it on the front
panel and there will be no interference with the air flow.
Note that the LEDs stick out a bit from the front panel, so put the
large part of the front panel on something that will be as thick or
thicker than the
Peter, I’m not completely sure because I have my amp in the shack within reach,
but I think you’ll need to switch in and out of standby from the amp itself
(unless you’re using remote software) …. But regarding the second question, if
you have selected “power per band” from the K3s menu, and if
As I understand it, the K3 generates a very clean CW signal with DSP. There
isn’t anything to filter out.
A narrow filter might add distortion and make things worse.
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Aug 21, 2018, at 1:42 PM, Byron Peebles
As noted in my prior email - This thread was closed yesterday.
73,
Eric
/elecraft.com/
On 8/21/2018 10:57 AM, Lee Ormiston wrote:
The cesium and iridium clocks at National Institute of Standards and
Technology through WWV and WWVH broadcasts, provide the time signals to the
Global Positioning
Don:
I do understand it works, since every unit is shipped that way.
My question is more in the vein of wouldn't using a 1kHz or less filter
be safer/cleaner/logical for CW?
Obviously, not as a factory default, since only one filter is sure to be
there, but on a per-user basis.
I thought
Strange, cranking up the compression doesn't seem to be affecting my 5 watt CW
signal much :-)
In keeping with the discussion, I use a small amount of compression and no TX
equalization on SSB and have had good success and audio compliments at 10 watts.
73, Dave RedfearnARS N4ELM Lafayette,
I have noticed that Elecraft K3/K3S defaults to setting the wide SSB
filter as the CW TX filter.
Is there a technical reason for doing this? Would it be better to use a
1kHz filter or one of the narrow CW filters?
Thanks, in advance.
73, Byron NZ3O
Byron,
The K3/K3S is designed to use the filter that is installed "stock" in
all transceivers, so you need to select the 2.7 (or 2.8) filter for CW
(or any other mode except AM, FM or ESSB) for transmit.
Requiring a 1kHz filter for CW transmit would require that filter be
included in the
Byron,
You are assuming that the CW signal shape is controlled by the TX filter.
It is not - that is done in the DSP and produces a clean single
frequency signal that is quite good at TX phase noise and keying artifacts.
As long as that signal fits within the bandpass of the filter all will
be
Ted,
Which Heil Proset are you using? There are basicly two types - those
with an electret mic element and those with a dynamic mic element. The
Proset-K2 and the Proset-iC have electret mics while the others have the
dynamic. Look at the pivot button for the microphone arm to see which
Is there any word on the KPA1500 remote program? Still using the Utility
program here for remote control.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ed G
Sent: Tuesday, August 21, 2018 4:52 PM
To:
Folks - this thread was already closed. Please no more WWV posts.
73,
Eric
Moderator, COO, etc.
/elecraft.com/
On 8/21/2018 9:05 AM, K2bew wrote:
Sorry don't agree at all. Emergency communications when everything is down
and people need help is not comparable to a transmitter that puts out the
I would add that changing the TX FLT to something else generates an
error when I try to use it. 73, Byron
On 08/21/2018 04:33 PM, Don Wilhelm wrote:
Byron,
The K3/K3S is designed to use the filter that is installed "stock" in
all transceivers, so you need to select the 2.7 (or 2.8) filter
Anytime you suspect a file or url to be malicious you can submit it on
virustotal.com for analysis.
de k4sne
Mark Ethridge
On Tue, Aug 21, 2018, 3:52 PM Ed G wrote:
>
> Hello,
> Anyone else getting a virus hit when trying to install the KPA1500
> Remote program (ver 1.14)? I get a
Sorry don't agree at all. Emergency communications when everything is down
and people need help is not comparable to a transmitter that puts out the
time according to an atomic clock over radio. You can always use a sundial,
and knowing the time to the second is not necessary in an emergency.
Tom
Hi all,
Just got my 1500 connected last night and so far so good. I do have two
questions, however. First, is it possible to toggle standby and operate from the
K3s, instead of using either the remote software or physically pressing the
button on the amp? And second, I was under the impression
42 matches
Mail list logo
