As a K2 only owner I appreciate when the posters reference the equipment
they are posting about in the subject line (e.g. "K3"). This helps with
auto sorting.
Tom, wb2qdg
K2 #1103
On 9/21/2016 1:29 PM, Thomas Taylor wrote:
On Tue, 20 Sep 2016 18:35:27 +
Eric J wrote:
I had recently
On Tue, 20 Sep 2016 18:35:27 +
Eric J wrote:
> I had recently stopped monitoring the reflector as I only have a K1 and
> two K2's. Everything is K3 and subject lines rarely reflect that anymore
> so it's hard to filter them. But I had a K2 problem and rejoined. Got a
> response with soluti
My K2 # 136 yet does yeoman duty at the bedside, as a listening post in
the whee hours
But recently I had to take it apart, to recall how the jumpers are set
for the HM-2. Was
helping a friend get his recent purchase of a mike & K2 to work together.
Brought back memories of the Summer 1999 ass
收件人︰ "elecraft@mailman.qth.net"
傳送日期︰ 2016年09月21日 (週三) 2:35 AM
主題︰ [Elecraft] OT: K2
I had recently stopped monitoring the reflector as I only have a K1 and
two K2's. Everything is K3 and subject lines rarely reflect that anymore
so it's hard to filter them. But I
Will,
Thank you for your fine words. They are appreciated. I continue to
help where I can.
73,
Don W3FPR
On 9/20/2016 8:39 PM, WILLIE BABER wrote:
Hello Don,
You may never know how many folks you have helped-out who are K2 owners. As I
mentioned in an earlier post, I didn't finish my K
On Tue, 9/20/16, Don Wilhelm wrote:
Subject: Re: [Elecraft] OT: K2
To: elecraft@mailman.qth.net
Date: Tuesday, September 20, 2016, 4:34 PM
Eric,
I do repairs, alignment and calibration and upgrades of the
Elecraft
legacy gear (K2, K1, KX1 and XV series transverters), and I
am as bu
Eric,
I do repairs, alignment and calibration and upgrades of the Elecraft
legacy gear (K2, K1, KX1 and XV series transverters), and I am as busy
as I want to be (sometimes more than I want to be).
So there is still a lot of interest in that gear, but you are right,
most of the posts are about
I had recently stopped monitoring the reflector as I only have a K1 and
two K2's. Everything is K3 and subject lines rarely reflect that anymore
so it's hard to filter them. But I had a K2 problem and rejoined. Got a
response with solution within an hour! And discovered that I miss the OT
discu
Try your local office supply store, like Staples. They have the ability
to create spiral-bound manuals. They could probably disassemble your
manual, laminate and re-punch the cover, and assemble it again. I had
some similar work done and it was surprisingly cheap.
73, Dennis NJ6G
On 10/18/2011
so I've been using my K2 manual a LOT lately and the cover is starting to
fall off - the holes are tearing out. Anybody know of a good way to protect
it from falling off completely?
TJ W0EA
__
Elecraft mailing list
Home: http://mailman.q
I would like to use an analogue speech compressor like the one in the K2
SSM2165 but I see it is now obsolete. Can anyone recommend an alternative?
In amateur applications of modest compression, is there much difference between
the -1 and -2 types? I'm told a few of the lower gain versions
Gee, somebody actually enjoying the hobby of ham radio instead of writing
posts of compaint. How refreshing!
73
Bob K4LW
Had to share the elation: snagged FO/OH1RX on 80 M CW at gray line this
morning -- K2 running 5 W to 135 foot doublet, window line feed, at 50
feet.
Mike, K8CN
K2 #5569
N
Had to share the elation: snagged FO/OH1RX on 80 M CW at gray line this
morning -- K2 running 5 W to 135 foot doublet, window line feed, at 50 feet.
Mike, K8CN
K2 #5569
New Hampshire
--
View this message in context:
http://www.nabble.com/OT%3A-K2-elation%21-tp14998762p14998762.html
Sent from th
Recently I had my K2 (#2511) upgraded with the A to B mod kits. I have had
some odd experiences with it since then.
When I get up each morning I need to stoke the fire to warm the house up.
Sometimes the morning temperature is in the high 40s (F). Normally it is in
the low 50s range. Not
I made my own cable. I used the 1/8" stereo plug for the RCV audio, and I
believe I use a 1/8" mono for the TX audio because I have one of the Heil
microphone adapter cables that breaks out the Keying and TX audio ckts to
seperate 1/4" & 1/8" jacks accordingly. Made it pretty simple versus havin
Yes David, I just bought that interface and have it working with the K2.
Stan Rife
W5EWA
David Wilburn <[EMAIL PROTECTED]> wrote:
Has anyone used the USInterface.com, Navigator, with the K2?
-
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 S/N 5982
On Wed, 2007-11-07 at 14:03 +0100, Sim
Has anyone used the USInterface.com, Navigator, with the K2?
-
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 S/N 5982
On Wed, 2007-11-07 at 14:03 +0100, Simon Brown (HB9DRV) wrote:
> FWIW I have a USInterface.com Navigator arriving soon. One USB cable to plug
> into the PC, the Navigator provides
I am still reminded of the [VHF] incident with VOX where the fellow in
southern Ohio running 900 Watts on 2 meters fell asleep during a net and his
snoring [with VOX] tied up a repeater until someone drove over and woke him
up.
Sorry guys just the lighter side of the VOX thread, have a great wee
18 matches
Mail list logo