A button I never use ... that fixed it. I must have bumped it while
re-mounting the data switch on top. Thanks,
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 4/10/2018 8:31 PM, Nr4c wrote:
Tap the upper right button.
Sent from my iPhone
...nr4c. bill
On Apr 10, 2018, at 10:1
I recently saw this happen on W6NV's P3 after upgrading the firmware from a
very old version to the most recent version in one jump, or perhaps I
accidentally removed power from the back of the P3 while it was on, while
simultaneously bumping one of the front panel buttons. Reloading the
firmware
Tap the upper right button.
Sent from my iPhone
...nr4c. bill
> On Apr 10, 2018, at 10:14 PM, Fred Jensen wrote:
>
> My P3 waterfall disappeared when I turned the rig on tonight. WF Height
> shows the line, and it moves with the knob, but no WF, just a very tall
> spectrum display. No SVG
My P3 waterfall disappeared when I turned the rig on tonight. WF Height
shows the line, and it moves with the knob, but no WF, just a very tall
spectrum display. No SVGA. I'll maybe reload the FW tomorrow.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
__
That I'll buy. I knew it was more than tapping the Display button.
Sent from my iPhone
...nr4c. bill
> On Dec 27, 2015, at 11:38 AM, Alan wrote:
>
> To have waterfall enabled on the external display and off on the internal
> display, or vice versa, requires three things:
>
> - P3 firmware 1
To have waterfall enabled on the external display and off on the
internal display, or vice versa, requires three things:
- P3 firmware 1.50 or later
- The "SVGA WfEn" menu entry set to either "Waterfall on" or "Waterfall
off" as desired.
- Toggling the DISPLAY key on the P3 to turn on/off th
w.ke7x.com
From: Elecraft on behalf of Alan
Sent: Saturday, December 26, 2015 9:52 PM
To: Nr4c
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 Waterfall Off with SVGA Waterfall On???
Make sure you have a recent P3 firmware version (1.50 or later).
Alan N1AL
On 12/26/201
No
On Sat, Dec 26, 2015 at 10:03 PM, Alan wrote:
> On 12/26/2015 06:23 PM, Ken Widelitz wrote:
>
>> The bottom of page 30 of the P3 manual shows a photo with the waterfall
>> What I would like to
>> accomplish is have the waterfall on the SVGA monitor, but not on the P3
>> display. Is that possi
Make sure you have a recent P3 firmware version (1.50 or later).
Alan N1AL
On 12/26/2015 08:34 PM, Nr4c wrote:
It more to it than that. I tried it and both screens change together.
Sent from my iPhone
...nr4c. bill
On Dec 26, 2015, at 10:03 PM, Alan wrote:
On 12/26/2015 06:23 PM, Ken Wi
It more to it than that. I tried it and both screens change together.
Sent from my iPhone
...nr4c. bill
> On Dec 26, 2015, at 10:03 PM, Alan wrote:
>
>> On 12/26/2015 06:23 PM, Ken Widelitz wrote:
>> The bottom of page 30 of the P3 manual shows a photo with the waterfall
>> What I would like
On 12/26/2015 06:23 PM, Ken Widelitz wrote:
The bottom of page 30 of the P3 manual shows a photo with the waterfall
What I would like to
accomplish is have the waterfall on the SVGA monitor, but not on the P3
display. Is that possible?
Yes, just use the P3's DISPLAY button to toggle the waterfa
The bottom of page 30 of the P3 manual shows a photo with the waterfall
completely off on the P3 with the TX Mon option. The text immediately above
that photo states "Note that in this illustration the waterfall display is
turned off so the spectrum display and the waveform display fill the main
pa
Hi Steve,
I agree that a dot or small vertical line at the bottom of the screen
would work great for this purpose.
The bottom white 'frame' already has small vertical 'tic' marks on it. I
think adding a small tic or dot just beneath that bottom frame would do
the trick. That way, the active part
Hi,
I use 50 Khz or more span only to get an overview. Normally i only use 10
khz and never had problems turning the marker to the waterfall trace, so
that I could catch the station next time it came up.
73 de
Hajo
---
Cela est bien dit, mais il faut cultiver notre jardin.
>
__
I can usually get close enough to hear the station by eye without a
marker, either on the P3 or on a 24" VGA.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 4 Nov 2015 20:14, Steve Ellington wrote:
All that's needed is a dot, pointer...something to act as a guide so we can
l
I think what Steve is asking for is a dot (non-line) marker at the *bottom* of
the waterfall and that doesn't have persistence (doesn't "leave a trail"), so
that he can line it up with a scrolling signal and then QSY to it before it
disappears off the bottom of the screen. It's actually not too
I always used fixed mode. Nope doesn't help.
There needs to be a marker at least at the bottom of the waterfall so you
can mark the signal before it disappears and shift frequency to it.
On Wed, Nov 4, 2015 at 1:11 PM, Steve Glickstein
wrote:
> Try Fixed/Tracking and see if that helps.
>
> 73, S
All that's needed is a dot, pointer...something to act as a guide so we can
line up the waterfall with the spectrum's marker. It doesn't need to be a
translucent line.
The dot could be at the bottom of the waterfall since that's where the
desired signal is headed anyway.
Great minds at Elecraft can
Try Fixed/Tracking and see if that helps.
73, Steve W4FMD
On 11/4/2015 12:32 PM, Steve Ellington wrote:
Paul et al
"Freeze" locks up everything including the marker so how does that help?
When searching for signals we might see one on the waterfall that is half
way down the screen. We wan
Paul et al
"Freeze" locks up everything including the marker so how does that help?
When searching for signals we might see one on the waterfall that is half
way down the screen. We want to mark, click or do something to get us
exactly on frequency so we can either wait for the signal to retur
Hi Steve,
That's how it works. If you don't want the signal to roll off the bottom of
the screen, use Freeze to stop the screen from updating or turn averaging on
to slow the screen updates and provide more history.
Kind regards,
Paul
--
View this message in context:
http://elecraft.3
Am I doing something wrong or is this just how it works?
I have the P3's waterfall marker turned on. The "marker" slowly crawls down
the screen toward the bottom. Moving the Select knob drags the top of the
marker and the rest slowly follows drawing a snake. Cute but...huh?
Question: What good is
Am I doing something wrong or is this just how it works?
I have the P3's waterfall marker turned on. The "marker" slowly crawls
down the screen toward the bottom. Moving the Select knob drags the top
of the marker and the rest slowly follows drawing a snake. Cute but...huh?
Question: What goo
Paul
Would it be possible to turn off the the spectrum display and its cursor
and add the cursor to the waterfall display?
Allan
AB8OU
*Allan Zadiraka*
On Thu, Sep 24, 2015 at 2:11 PM, Paul Saffren wrote:
> Hi Allan,
>
> The short answer is that the hardware doesn't support it. The long
Hi Allan,
The short answer is that the hardware doesn't support it. The long
answer is that the video chip we are using on the SVGA accessory board
limits us to how many "video layers" we can combine to produce the video
image. Overlaying the cursors on to the waterfall would require an
add
Why is are waterfall cursors not available? They would be much more useful
than the frequency spectrum display.
*Allan Zadiraka*
*AJ ZA**DIRAKA LLC*
4110 State RdAkron, OH 44319Work: 234-738-4578Cell:
330.760.4569Fax: 330.644.1839
On Wed, Sep 23, 2015 at 1:18 PM, Paul Saffre
Hi Smith,
The P3/SVGA waterfall cursor is incorrectly named, it should read 'waterfall
marker" in the release notes. The cursor is not shown in the SVGA
waterfall, but if you turn on Marker A or B, they will appear.
-Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.c
I can't get my P3 SVGA to turn on the waterfall cursor. I go to the menu
and tap the knob but no cursor appears. Suggestions please...
Firmware is up to date.
Smith
W9HAK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
You can increase the waterfall sensitivity by adjusting the REF LVL to
place the noise right at the bottom of the spectrum display and then
increasing the SCALE setting. The same REF LVL and SCALE settings are
applied to both the spectrum and the waterfall displays. For further
details, see t
On Tue,3/24/2015 12:44 PM, Hunter Ellington via Elecraft wrote:
Is there a sensitivity adjustment on the P3 that I need to play with?
All of your concerns are answered in the manual. The P3 is a very
powerful and versatile product, and the SVGA board increases its
capabilities. It's scan widt
I recently purchased a new P3/SVGA unit, and am using it with my K3 (serial #
6999). I have a few questions. First, when I engage the Marker function and
use it in the waterfall window, it comes up on the P3 screen, but not on the
external monitor (although it does work on the upper panadapter
Hi Gary,
The signal you are referring to is a STANAG 4285 military transmission
from Turkey. The curly things you see in the spectrum is in fact
selective fading in the sent spectrum, which is roughly 10 kHz wide.
10.1102 MHz-USB-Izmir, Turkey Turkish Navy - STANAG 4285
from:
http://qrg.gl
Is there a resource on the internet where you can look at different
screenshots and see what the source is for some of the signals that
are translated by the waterfall? I see so many different geometric
forms based on the nature of the Rf and they are a mystery to me. CW
is pretty easy to dete
KHz +/- bandwidth.
73,
... Joe, W4TV
On 1/21/2011 9:26 AM, Johnny Siu wrote:
> The manual notch is NOT within AGC loop.
>
> cheers,
>
>
> Johnny VR2XMC
>
>
>
>
>
> 寄件人﹕ Chuck Shefflette
> 收件人﹕ W4GRJ
> 副本(CC) elecraft@mailman
The manual notch is NOT within AGC loop.
cheers,
Johnny VR2XMC
寄件人﹕ Chuck Shefflette
收件人﹕ W4GRJ
副本(CC) elecraft@mailman.qth.net
傳送日期﹕ 2011/1/21 (五) 9:33:54 PM
主題: Re: [Elecraft] P3 Waterfall
This is because the P3 waterfall is taken from the IF output
This is because the P3 waterfall is taken from the IF output. The notch is done
with the DSP on the 15KHz IF, not the 8215KHz IF.
Chuck - AA3CS
On 21 Jan 2011, at 08:15, W4GRJ wrote:
> This is more a educational question. When using the manual notch to take out
> a constant carrier, I can see th
This is more a educational question. When using the manual notch to take out
a constant carrier, I can see the notch take out the carrier on the DSM780
waterfall however, the carrier is still visible on the P3 waterfall. Just
wondering why you can't see the same notch effect in the P3 waterfall.
Th
This has been talked about during field testing and has been
considered. There were no promises but once things calm down they may
have time to get to something like this.
~Brett (N7MG)
On Fri, Aug 20, 2010 at 2:12 PM, GLEN BROWN <210g...@gmail.com> wrote:
> I would not expect any new informatio
ke7vwi wrote:
>
> Does anyone have a recommendation on an article or some info on
> using/interpreting the waterfall display?
>
I searched but the following is the best I could find (which isn't great):
http://en.wikipedia.org/wiki/Spectrogram
A waterfall is basically a spectrum (signal am
I would not expect any new information outside of the starting display
... Black on the edge would ok until filled in from the top. I just
think that would be a much more useful dislay when tuning from the K3
as an alternative to marker QSY.
Glen, W6GJB
Sent from Gmail for mobile
On 8/19/10, G
And uses the resources of a PC to present it?
On Thu, Aug 19, 2010 at 1:44 PM, Nate Bargmann wrote:
> * On 2010 19 Aug 12:30 -0500, Guy Olinger K2AV wrote:
>> This is the normal behavior of all waterfall displays I've seen, and
>> is a very familiar screen behavior.
>
> The Fldigi program follows
* On 2010 19 Aug 12:30 -0500, Guy Olinger K2AV wrote:
> This is the normal behavior of all waterfall displays I've seen, and
> is a very familiar screen behavior.
The Fldigi program follows the behavior Glen requests and is what I'd
also expect to see when tuning.
73, de Nate >>
--
"The optimi
This is the normal behavior of all waterfall displays I've seen, and
is a very familiar screen behavior.
The cursor is the means of zeroing a signal of interest which then
telegraphs the new frequency back to the K3.
Part of the issue of tuning is that the saved information does not
include frequ
The P3 waterfall works just like all others I have seen and used: when you
tune to radio, the "old" pixels continue to move down the screen vertically,
but do not move horizontally with the tuning. As a result, the waterfall is
useless until it catches up a couple of seconds later. If those pixel
I have never used a waterfall display before getting my P3 (sn 155). I used
spectrum analyzers before.
Does anyone have a recommendation on an article or some info on
using/interpreting the waterfall display?
In the commercial world, never used them just spectrum analyzers.
Oh the P3 works wel
David Gilbert wrote:
>
> Of all the various non-SDR applications I tried that are capable of
> displaying a waterfall (Spectrogram, DigiPan, MixW, MultiPSK, etc) CW
> Skimmer was heads above the rest, but the recent comments about the
> sharpness of the P3 display make me wonder if the P3 is
For those who now have a P3 and also use CW Skimmer in one form or
another, how do the waterfall displays compare on CW for resolution and
scroll rate? I often use CW Skimmer in "blind" mode with just the audio
feed from my K3 to provide a running visual CW display (about 12 to 15
seconds on
Ed,
It's exponentially weighted.
Alan
On Sun, 2010-08-15 at 19:31 -0700, Ed, W9EJB wrote:
> Alan,
>
> I am curious about the algorithm you used for the averaging. Is it just a
> straightforward, uniformally weighted average or do you use something more
> sophisticated? , e.g., an exponentiall
Alan,
I am curious about the algorithm you used for the averaging. Is it just a
straightforward, uniformally weighted average or do you use something more
sophisticated? , e.g., an exponentially weighted average.
Ed, W9EJB
--
View this message in context:
http://elecraft.365791.n2.nabble.com/
ng? I've noticed on 2 units
now that they all continue to drift DOWN in freq. as the day goes on.
> Subject: Re: [Elecraft] P3 Waterfall Averaging
> From: a...@elecraft.com
> To: notforc...@hotmail.com
> CC: elecraft@mailman.qth.net
> Date: Sun, 15 Aug 2010 12:01:55 -0700
&g
There's an option in the MENU to turn it on or off: "Wfall Avg".
Alan N1AL
On Sun, 2010-08-15 at 18:53 +, The Smiths wrote:
> I hate to be a party pooper, Allen, but I absolutely HATE having the the
> waterfall average along with the audio scope on ver .031.
>
> It makes the noise floo
I hate to be a party pooper, Allen, but I absolutely HATE having the the
waterfall average along with the audio scope on ver .031.
It makes the noise floor an out of focus blob and all the code coming down
through it just a big blur. I would MUCH prefer to have the upper portion ONLY
avera
52 matches
Mail list logo