Re: [Elecraft] Inventorying a K3/P3
Bill, thank you, Keith gave me the needed info! No need to call. 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources On 3/29/21 9:58 PM, Bill Johnson wrote: Given what I have read on the reflector, try calling. There are so may impatient dolts, I can understand there situation. All the stupid "when will I get mine" I am sure have bogged down their inbox. Not to say phone messages aren't as well. But who knows Bill K9YEQ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Dave Cole Sent: Monday, March 29, 2021 10:43 PMTo: Brian Hunt Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Inventorying a K3/P3 Hi Brian, Thank you for the suggestions, and the tidbits of the additional steps for add on items like new synths, etc. I have saved your email. I have sent Elecraft three seperate email requests across three weeks, and gotten precisely zero replies from supp...@elecraft.com address... Very dissapointing, not even an acknoledgment they got the mail... It is like firing email into a black hole... I just resent the 4th request, this time to sales, support, and webmaster in hopes I can get in touch with someone at the Elecraft! I understand things are busy, and I understadn things are diffucult to to COVID, etc., but three weeks, and three requests later I am getting very frustrated. 73, and thanks, Dave (NK7Z) https://www.nk7z.net On 3/29/21 5:12 PM, Brian Hunt wrote: Dave, There have also been numerous component adds/mods over the years. Three that I did a couple years ago are 1. Increase the 12vdc accessory power from 500 ma to 1 A. Evidence is a 1A sticker on the rear of the K3. 2. Add a capacitor to the KPA3 to eliminate fan noise pickup evident after the new synthesizers are installed. 3. Addition of a capacitor to the KBPF3 general coverage BPFs to extend coverage down to the 630 meter band. I’m sure there are others. See the mod instructions available on the Elecraft site if you go sleuthing inside the box. These are a bit inconsequential but add value to the K3. Have you thought about asking Elecraft for the work orders for the K3’s S/N? Good luck and thank you for helping out the family. Sorry you lost a friend. 73, Brian, K0DTJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9...@live.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
That is a hell of a good idea! 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources On 3/30/21 6:35 AM, Geert Jan de Groot wrote: Hi, First off, sorry for your loss. As to options, and especially modifications, I very much would like Elecraft to give each modification a number so there can be a sticker in a radio that says: This radio has the following modifications: 01, 02, 03, 04, 06, 08, 12. That would make these things much easier. For K2, K3, and the KX-en too late, but perhaps for the K4 this can and should be done? Geert Jan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3 nk7z
Keith, First off, thank you very much for the reply! I do appreciate it greatly! That is the info I needed! I now know the menus will give me most of what I need. As far as I know the radio has not been reset, nor has anyone been in it! That makes things a lot simpler! I do thank you sir! Take care, and and stay safe! Again, thank you. 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources On 3/30/21 9:22 AM, Keith Trinity WE6R wrote: Hi Dave; Since it was here less than a year ago, no need to send it for updates. If it hasn't been altered, you can get all the options/filters from the menus. If it has been reset for some reason, we can send you the configuration file to re-load that was saved at last service. We don't inventory every radio, but you could load that file into the radio and then go thru the menus. This would be a fairly accurate list unless you believe he removed/changed any filters or options, in which case you will have to open it up and take out the Sub receiver and open the sub receiver to inventory all items. Someone could also load that file into another radio (I believe it is advanced mode of the K3 Utility lets you skip past the serial # mismatch) then look thru the menus. Don't forget to save the host radio's config file before doing this so you can restore it! Keith WE6R K3/K4 Tech. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3 nk7z
Hi Dave; Since it was here less than a year ago, no need to send it for updates. If it hasn't been altered, you can get all the options/filters from the menus. If it has been reset for some reason, we can send you the configuration file to re-load that was saved at last service. We don't inventory every radio, but you could load that file into the radio and then go thru the menus. This would be a fairly accurate list unless you believe he removed/changed any filters or options, in which case you will have to open it up and take out the Sub receiver and open the sub receiver to inventory all items. Someone could also load that file into another radio (I believe it is advanced mode of the K3 Utility lets you skip past the serial # mismatch) then look thru the menus. Don't forget to save the host radio's config file before doing this so you can restore it! Keith WE6R K3/K4 Tech. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Hi, First off, sorry for your loss. As to options, and especially modifications, I very much would like Elecraft to give each modification a number so there can be a sticker in a radio that says: This radio has the following modifications: 01, 02, 03, 04, 06, 08, 12. That would make these things much easier. For K2, K3, and the KX-en too late, but perhaps for the K4 this can and should be done? Geert Jan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
I wouldn't go so far as to call them "dolts" -- Elecraft *is* currently running far behind reasonable expectations for turnaround time, and asking for an update is a reasonable response to that. I'm happy to cut them some slack, and I hope others will be as well, but it's a lot easier to do that patiently when we (a) know our emails will actually get a response and (b) know how long to expect things to take. 73, Julie On Tue, Mar 30, 2021 at 12:59 AM Bill Johnson wrote: > Given what I have read on the reflector, try calling. There are so may > impatient dolts, I can understand there situation. All the stupid "when > will I get mine" I am sure have bogged down their inbox. Not to say phone > messages aren't as well. But who knows > > Bill > K9YEQ > > -Original Message- > From: elecraft-boun...@mailman.qth.net > On Behalf Of Dave Cole > Sent: Monday, March 29, 2021 10:43 PMTo: Brian Hunt < > huntin...@coastside.net> > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Inventorying a K3/P3 > > Hi Brian, > > Thank you for the suggestions, and the tidbits of the additional steps for > add on items like new synths, etc. I have saved your email. > > I have sent Elecraft three seperate email requests across three weeks, and > gotten precisely zero replies from supp...@elecraft.com address... > > Very dissapointing, not even an acknoledgment they got the mail... It is > like firing email into a black hole... > > I just resent the 4th request, this time to sales, support, and webmaster > in hopes I can get in touch with someone at the Elecraft! > > I understand things are busy, and I understadn things are diffucult to to > COVID, etc., but three weeks, and three requests later I am getting very > frustrated. > > 73, and thanks, > Dave (NK7Z) > https://www.nk7z.net > > > On 3/29/21 5:12 PM, Brian Hunt wrote: > > Dave, > > There have also been numerous component adds/mods over the years. Three > that I did a couple years ago are 1. Increase the 12vdc accessory power > from 500 ma to 1 A. Evidence is a 1A sticker on the rear of the K3. 2. Add > a capacitor to the KPA3 to eliminate fan noise pickup evident after the new > synthesizers are installed. 3. Addition of a capacitor to the KBPF3 general > coverage BPFs to extend coverage down to the 630 meter band. I’m sure there > are others. See the mod instructions available on the Elecraft site if you > go sleuthing inside the box. These are a bit inconsequential but add value > to the K3. > > > > Have you thought about asking Elecraft for the work orders for the K3’s > S/N? > > > > Good luck and thank you for helping out the family. Sorry you lost a > friend. > > > > 73, > > Brian, K0DTJ > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k9...@live.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ju...@juliatuttle.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Given what I have read on the reflector, try calling. There are so may impatient dolts, I can understand there situation. All the stupid "when will I get mine" I am sure have bogged down their inbox. Not to say phone messages aren't as well. But who knows Bill K9YEQ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Dave Cole Sent: Monday, March 29, 2021 10:43 PMTo: Brian Hunt Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Inventorying a K3/P3 Hi Brian, Thank you for the suggestions, and the tidbits of the additional steps for add on items like new synths, etc. I have saved your email. I have sent Elecraft three seperate email requests across three weeks, and gotten precisely zero replies from supp...@elecraft.com address... Very dissapointing, not even an acknoledgment they got the mail... It is like firing email into a black hole... I just resent the 4th request, this time to sales, support, and webmaster in hopes I can get in touch with someone at the Elecraft! I understand things are busy, and I understadn things are diffucult to to COVID, etc., but three weeks, and three requests later I am getting very frustrated. 73, and thanks, Dave (NK7Z) https://www.nk7z.net On 3/29/21 5:12 PM, Brian Hunt wrote: > Dave, > There have also been numerous component adds/mods over the years. Three that > I did a couple years ago are 1. Increase the 12vdc accessory power from 500 > ma to 1 A. Evidence is a 1A sticker on the rear of the K3. 2. Add a capacitor > to the KPA3 to eliminate fan noise pickup evident after the new synthesizers > are installed. 3. Addition of a capacitor to the KBPF3 general coverage BPFs > to extend coverage down to the 630 meter band. I’m sure there are others. See > the mod instructions available on the Elecraft site if you go sleuthing > inside the box. These are a bit inconsequential but add value to the K3. > > Have you thought about asking Elecraft for the work orders for the K3’s S/N? > > Good luck and thank you for helping out the family. Sorry you lost a friend. > > 73, > Brian, K0DTJ > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k9...@live.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Hi Brian, Thank you for the suggestions, and the tidbits of the additional steps for add on items like new synths, etc. I have saved your email. I have sent Elecraft three seperate email requests across three weeks, and gotten precisely zero replies from supp...@elecraft.com address... Very dissapointing, not even an acknoledgment they got the mail... It is like firing email into a black hole... I just resent the 4th request, this time to sales, support, and webmaster in hopes I can get in touch with someone at the Elecraft! I understand things are busy, and I understadn things are diffucult to to COVID, etc., but three weeks, and three requests later I am getting very frustrated. 73, and thanks, Dave (NK7Z) https://www.nk7z.net On 3/29/21 5:12 PM, Brian Hunt wrote: Dave, There have also been numerous component adds/mods over the years. Three that I did a couple years ago are 1. Increase the 12vdc accessory power from 500 ma to 1 A. Evidence is a 1A sticker on the rear of the K3. 2. Add a capacitor to the KPA3 to eliminate fan noise pickup evident after the new synthesizers are installed. 3. Addition of a capacitor to the KBPF3 general coverage BPFs to extend coverage down to the 630 meter band. I’m sure there are others. See the mod instructions available on the Elecraft site if you go sleuthing inside the box. These are a bit inconsequential but add value to the K3. Have you thought about asking Elecraft for the work orders for the K3’s S/N? Good luck and thank you for helping out the family. Sorry you lost a friend. 73, Brian, K0DTJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Dave, There have also been numerous component adds/mods over the years. Three that I did a couple years ago are 1. Increase the 12vdc accessory power from 500 ma to 1 A. Evidence is a 1A sticker on the rear of the K3. 2. Add a capacitor to the KPA3 to eliminate fan noise pickup evident after the new synthesizers are installed. 3. Addition of a capacitor to the KBPF3 general coverage BPFs to extend coverage down to the 630 meter band. I’m sure there are others. See the mod instructions available on the Elecraft site if you go sleuthing inside the box. These are a bit inconsequential but add value to the K3. Have you thought about asking Elecraft for the work orders for the K3’s S/N? Good luck and thank you for helping out the family. Sorry you lost a friend. 73, Brian, K0DTJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Hi Rick, Thank you for the tips! I will miss the him, I knew him for 50 years... We ended up living maybe 700 feet from each other about 40 years ago, all by chance... 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources On 3/29/21 10:34 AM, Rick NK7I wrote: Dave, The menu settings would be a good place to start, confirmed by taking the cover off. One receiver is covered by the other, so some disassembly is required for the visual of the filters. Then tuner, which i/o board etc. For the P3, the options are the SVGA board and the TX board. Sorry for your loss, Rick NK7I On 3/29/2021 10:30 AM, John Simmons wrote: Dave, This topic was recently covered either here or another reflector I subscribe to. There isn't a very good way to properly find all the options installed other than pulling the cover to see. There are two programs that may help: The Elecraft K3 Utility program and K3_EZ: https://groups.io/g/Elecraft-K3/files/K3_EZ -de John NI0K Dave Cole wrote on 3/29/2021 12:18 PM: Hi, I am about to take a look at a K3 which a SK estate has asked me to sell for them. It was a friend of mine, for of many decades that passed, and his children and wife have now decided to sell the K3/P3. I need to inventory the K3 to see what all is in it... Aside from the obvious, and what I know about the rig, (I helped him go over the rig when he got it, and before he purchased it), are there any tell tail signs in the configuration menu I should look for? What I know is the following: K3, with second receiver New synths in it for each RX. 10 MHz input for external reference. Elecraft has gone over it and put the gold contacts in it. Early serial number I will be visiting the rig later this week, so I am looking for any tips... Private email is fine if you don't want to clog up the reflector. I had thought of sending it to Elecraft and have them look it over for a list of items, but with the extended return times of late, I think I'll advise the family to wait a bit on that option. It was just at Elecraft less than a year or so ago, and blessed by them, so it should still be in good shape... Anyway, if you can think of things to look for, I am all ears... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rick.n...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Thanks sir!!! I will look for them. 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources On 3/29/21 10:30 AM, John Simmons wrote: Dave, This topic was recently covered either here or another reflector I subscribe to. There isn't a very good way to properly find all the options installed other than pulling the cover to see. There are two programs that may help: The Elecraft K3 Utility program and K3_EZ: https://groups.io/g/Elecraft-K3/files/K3_EZ -de John NI0K Dave Cole wrote on 3/29/2021 12:18 PM: Hi, I am about to take a look at a K3 which a SK estate has asked me to sell for them. It was a friend of mine, for of many decades that passed, and his children and wife have now decided to sell the K3/P3. I need to inventory the K3 to see what all is in it... Aside from the obvious, and what I know about the rig, (I helped him go over the rig when he got it, and before he purchased it), are there any tell tail signs in the configuration menu I should look for? What I know is the following: K3, with second receiver New synths in it for each RX. 10 MHz input for external reference. Elecraft has gone over it and put the gold contacts in it. Early serial number I will be visiting the rig later this week, so I am looking for any tips... Private email is fine if you don't want to clog up the reflector. I had thought of sending it to Elecraft and have them look it over for a list of items, but with the extended return times of late, I think I'll advise the family to wait a bit on that option. It was just at Elecraft less than a year or so ago, and blessed by them, so it should still be in good shape... Anyway, if you can think of things to look for, I am all ears... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Dave, The menu settings would be a good place to start, confirmed by taking the cover off. One receiver is covered by the other, so some disassembly is required for the visual of the filters. Then tuner, which i/o board etc. For the P3, the options are the SVGA board and the TX board. Sorry for your loss, Rick NK7I On 3/29/2021 10:30 AM, John Simmons wrote: Dave, This topic was recently covered either here or another reflector I subscribe to. There isn't a very good way to properly find all the options installed other than pulling the cover to see. There are two programs that may help: The Elecraft K3 Utility program and K3_EZ: https://groups.io/g/Elecraft-K3/files/K3_EZ -de John NI0K Dave Cole wrote on 3/29/2021 12:18 PM: Hi, I am about to take a look at a K3 which a SK estate has asked me to sell for them. It was a friend of mine, for of many decades that passed, and his children and wife have now decided to sell the K3/P3. I need to inventory the K3 to see what all is in it... Aside from the obvious, and what I know about the rig, (I helped him go over the rig when he got it, and before he purchased it), are there any tell tail signs in the configuration menu I should look for? What I know is the following: K3, with second receiver New synths in it for each RX. 10 MHz input for external reference. Elecraft has gone over it and put the gold contacts in it. Early serial number I will be visiting the rig later this week, so I am looking for any tips... Private email is fine if you don't want to clog up the reflector. I had thought of sending it to Elecraft and have them look it over for a list of items, but with the extended return times of late, I think I'll advise the family to wait a bit on that option. It was just at Elecraft less than a year or so ago, and blessed by them, so it should still be in good shape... Anyway, if you can think of things to look for, I am all ears... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rick.n...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Inventorying a K3/P3
Dave, This topic was recently covered either here or another reflector I subscribe to. There isn't a very good way to properly find all the options installed other than pulling the cover to see. There are two programs that may help: The Elecraft K3 Utility program and K3_EZ: https://groups.io/g/Elecraft-K3/files/K3_EZ -de John NI0K Dave Cole wrote on 3/29/2021 12:18 PM: Hi, I am about to take a look at a K3 which a SK estate has asked me to sell for them. It was a friend of mine, for of many decades that passed, and his children and wife have now decided to sell the K3/P3. I need to inventory the K3 to see what all is in it... Aside from the obvious, and what I know about the rig, (I helped him go over the rig when he got it, and before he purchased it), are there any tell tail signs in the configuration menu I should look for? What I know is the following: K3, with second receiver New synths in it for each RX. 10 MHz input for external reference. Elecraft has gone over it and put the gold contacts in it. Early serial number I will be visiting the rig later this week, so I am looking for any tips... Private email is fine if you don't want to clog up the reflector. I had thought of sending it to Elecraft and have them look it over for a list of items, but with the extended return times of late, I think I'll advise the family to wait a bit on that option. It was just at Elecraft less than a year or so ago, and blessed by them, so it should still be in good shape... Anyway, if you can think of things to look for, I am all ears... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
