Bastien bzg at gnu.org writes:
I can't reproduce this.
Can you provide a recipe and/or a screenshot?
The date is different now and that particular combination of deadlines is gone.
When I see it again, I'll take a screenshot. Thanks.
Nick Dokos nicholas.dokos at hp.com writes:
Can't reproduce it here: Org-mode version 7.8.11
(release_7.8.11-107-ga69f4b @ /home/nick/elisp/org-mode/lisp/)
Tried both the old and the new exporter, exporting to ascii, latex
and html of the following file:
...
and I only get the bar tree
Hi,
On Mon, Jul 09, 2012 at 08:54:53AM +, SW wrote:
Nick Dokos nicholas.dokos at hp.com writes:
Can't reproduce it here: Org-mode version 7.8.11
(release_7.8.11-107-ga69f4b @ /home/nick/elisp/org-mode/lisp/)
Tried both the old and the new exporter, exporting to ascii, latex
and
I'm using Org-mode version 7.8.11-1
7.8.11-1 is very old. Upgrade and problem will disappear.
--
Suvayu Ali fatkasuvayu+linux at gmail.com writes:
Have you tried with a minimal setup? It's quite easy. Some instructions
are included in the Org mode manual[1]. It also helps if you provide a
minimal example org file, we like to call that an ECM[2] on the list.
I have already confirmed that
Jambunathan K kjambunathan at gmail.com writes:
I'm using Org-mode version 7.8.11-1
7.8.11-1 is very old. Upgrade and problem will disappear.
From the org-mode download page right now:
Current Version: Org 7.8.11
How is 7.8.11 very old? Which version should I upgrade to?
Suvayu Ali fatkasuvayu+linux at gmail.com writes:
Have you tried with a minimal setup? It's quite easy. Some instructions
are included in the Org mode manual[1]. It also helps if you provide a
minimal example org file, we like to call that an ECM[2] on the list.
If you would like a minimum
Correction to previous post:
This exports all three headlines. Modify as follows:
should read:
This exports all *two* headlines. Modify as follows:
SW sabrewo...@gmail.com writes:
Jambunathan K kjambunathan at gmail.com writes:
I'm using Org-mode version 7.8.11-1
7.8.11-1 is very old. Upgrade and problem will disappear.
From the org-mode download page right now:
Current Version: Org 7.8.11
How is 7.8.11 very old? Which
Jambunathan K kjambunathan at gmail.com writes:
How about something in the range of 130+ - say release_7.8.11-135?
Unless there is something related to exporting and possibly
org-export-select-tags, I'm not sure this would help. A search here:
I'm not sure this would help.
Oh, OK.
--
Hi,
Csanyi Pal csanyi...@gmail.com writes:
In Emacs Org-mode I export a tree by running
C-c C-e m
and try open the exported file.mm in FreeMind but get error message:
javax.xml.transform.TransformerException:
javax.xml.transform.TransformerException:
Csanyi, do you have an example you can mail me privately? (Or to the
list, if you prefer, of course.)
On Mon, Jul 9, 2012 at 3:24 PM, Bastien b...@gnu.org wrote:
Hi,
Csanyi Pal csanyi...@gmail.com writes:
In Emacs Org-mode I export a tree by running
C-c C-e m
and try open the exported
Bastien b...@gnu.org writes:
Hi,
Csanyi Pal csanyi...@gmail.com writes:
In Emacs Org-mode I export a tree by running
C-c C-e m
and try open the exported file.mm in FreeMind but get error message:
javax.xml.transform.TransformerException:
javax.xml.transform.TransformerException:
SW sabrewo...@gmail.com writes:
Can't reproduce it here: Org-mode version 7.8.11
(release_7.8.11-107-ga69f4b @ /home/nick/elisp/org-mode/lisp/)
Tried both the old and the new exporter, exporting to ascii, latex
and html of the following file:
...
and I only get the bar tree exported in
Csanyi Pal csanyi...@gmail.com writes:
Note however that I don't have installed org-mode but in my Emacs still
I can to edit in org-mode probably because my Version of Emacs support
org-mode by default?
You can get Org's version with M-x org-version RET.
GNU Emacs comes with Org.
--
Bastien b...@gnu.org writes:
Csanyi Pal csanyi...@gmail.com writes:
Note however that I don't have installed org-mode but in my Emacs still
I can to edit in org-mode probably because my Version of Emacs support
org-mode by default?
You can get Org's version with M-x org-version RET.
Csanyi Pal csanyi...@gmail.com writes:
Indeed! I have Org-mode version 6.33x
This is prehistory, close to the Big Bang.
Please update your Emacs or your Org!
Not only for freemind, but for anything else...
--
Bastien
Bastien b...@gnu.org writes:
Csanyi Pal csanyi...@gmail.com writes:
Indeed! I have Org-mode version 6.33x
This is prehistory, close to the Big Bang.
Please update your Emacs or your Org!
OK
After I search with 'aptitude search emacs' command, I find that emacs24
is installable on my
Csanyi Pal csanyi...@gmail.com writes:
Now, when I try to export a tree in Arduino.org I get a message:
Can't find library org
What can I do now?
What happens if you open afile.org in Emacs 24?
What is the value of major-mode?
What format do you export to?
Did you try all this with emacs
Csanyi Pal csanyi...@gmail.com writes:
[snip]
So now I have Org-mode version 7.8.11
Now, when I try to export a tree in Arduino.org I get a message:
Can't find library org
What can I do now?
I find the solution: I installed emacs24-el and after that I can to
export again the tree from
Nick Dokos nicholas.do...@hp.com wrote:
Footnotes:
[fn:1] NB: this is different from just a minimal example. It involves
setting up a bare-bones .emacs and then starting emacs like this
emacs -q --load /path/to/minimal/.emacs /path/to/minimal/example.org
and trying the
Bastien b...@gnu.org writes:
[snip]
What is the value of major-mode?
It's 'Org'.
What format do you export to?
Maybe I don't understand your question. English isn't my first
language.
I'm exporting .org format to .mm format.
Did you try all this with emacs -Q?
What is 'emacs -Q'?
Csanyi Pal csanyi...@gmail.com wrote:
Bastien b...@gnu.org writes:
[snip]
What is the value of major-mode?
It's 'Org'.
What format do you export to?
Maybe I don't understand your question. English isn't my first
language.
I'm exporting .org format to .mm format.
Did you
SW sabrewo...@gmail.com wrote:
Suvayu Ali fatkasuvayu+linux at gmail.com writes:
Have you tried with a minimal setup? It's quite easy. Some instructions
are included in the Org mode manual[1]. It also helps if you provide a
minimal example org file, we like to call that an ECM[2] on the
Nick Dokos nicholas.do...@hp.com writes:
[snip]
Good: if you can reproduce the problem with emacs -Q, then it's probably
a bug in org (presumably org-freemind.el in this case). In that case, the
best thing you can do is to trim down your input file as far as possible
while still reproducing
Csanyi Pal csanyi...@gmail.com wrote:
OK
I started emacs with the command 'emacs -Q' and did the followings:
Open the Test.org file in Org mode.
Export the tree into FreeMind format with the command:
C-c C-e m
Get the Test.mm file.
In the FreeMind when I open the Test.mm file, I get
Nick Dokos nicholas.do...@hp.com writes:
Csanyi Pal csanyi...@gmail.com wrote:
[snip]
Well, I suspect that none of us here is a freemind expert (I know I'm
not), with the possible exception of Lennart Borgman, the author of
org-freemind.el. So the main question is: is this a bug in freemind
I'm exporting a Beamer presentation with R babel blocks and my plots
are not centered. This should be a reproducible example:
-
#+startup: beamer
#+latex_class: beamer
#+options: toc:nil latex:t tex:t
#+latex_class_options: [presentation,bigger]
#+beamer_frame_level: 1
* plot
#+header:
Nick Dokos nicholas.dokos at hp.com writes:
Well, so far nobody else can reproduce it, so the working assumption is
that it is an artifact of either the version you are running or your
configuration. As Suvayu suggests, a minimal org setup[fn:1] would
distinguish between the two. Otherwise,
Karl Voit devn...@karl-voit.at writes:
* Bernt Hansen be...@norang.ca wrote:
Karl Voit devn...@karl-voit.at writes:
C-c C-p (outline-previous-visible-heading) jumps from «Meeting 3»
directly to the previous *visible* heading «Person X» and not to
«Meeting 2».
C-c C-r should call
SW sabrewo...@gmail.com wrote:
[FWIW, this link:
http://orgmode.org/worg/org-faq.php#keeping-current-with-Org%20mode-development
linked from here:
http://orgmode.org/org-mode-download.html
is broken.]
Yup, it should be a hyphen, not a space:
SW sabrewolfy at gmail.com writes:
I am not familiar with downloading any version other than the
one in my distro's repository or the Debian version from
orgmode.org. I will look into getting a version later than
7.8.11-1, which is what my version is. I tested with the
minimal file before:
Hi:
Last but not least, source code highlight support. Unlike LaTeX, there
is no package for source code highlight in groff. Looking around, I
decided to use GNU source highlight as a solution. The reason being
that the way output definitions are declared is through the use of
configuration
(1) I extracted the latest tar.gz file downloaded from org-mode.org
(org-mode-9d16365c201201679b190c601c8d32e06530a21a.tar.gz) to /tmp/org-mode.
(2) I loaded Emacs with emacs -Q and then entered:
(setq load-path (cons /tmp/org-mode/lisp load-path))
into the scratch buffer.
(4) I marked it and
SW sabrewo...@gmail.com wrote:
(1) I extracted the latest tar.gz file downloaded from org-mode.org
(org-mode-9d16365c201201679b190c601c8d32e06530a21a.tar.gz) to /tmp/org-mode.
(2) I loaded Emacs with emacs -Q and then entered:
(setq load-path (cons /tmp/org-mode/lisp load-path))
into
I have typically outputted graphics from R via tikzDevice manually,
but gave my first whirl to just including things via the :file
argument in my block header. In the process, I was trying to get this
to work and found I needed to use:
-
:results output graphics
-
This is listed on Worg
While in your org buffer do a
C-c C-e t
You will now have a set of headers (as below). Specifically note the
select and exclude tags directive.
Now do a export and report what happens.
Just to be sure, do a M-x locate-library RET org RET to make sure the
path is right.
#+TITLE: 1.org
Nick Dokos nicholas.dokos at hp.com writes:
What does M-x locate-library RET org-install RET say?
Library is file /usr/share/emacs/23.2/site-lisp/org-mode/org-install.elc
(The latest version download is now different -- it no longer says version N/A
N/A. It now says:
Org-mode version
Jambunathan K kjambunathan at gmail.com writes:
While in your org buffer do a
C-c C-e t
#+TITLE: testing.org
#+AUTHOR:
#+EMAIL:
#+DATE: 2012-07-09 Mon
#+DESCRIPTION:
#+KEYWORDS:
#+LANGUAGE: en
#+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t :t
Hi Luis,
On Mon, Jul 9, 2012 at 10:32 PM, Luis Anaya papoan...@hotmail.com wrote:
Hi:
Last but not least, source code highlight support. Unlike LaTeX, there
is no package for source code highlight in groff. Looking around, I
decided to use GNU source highlight as a solution. The reason being
SW sabrewolfy at gmail.com writes:
I have an org-file with many headlines of various levels, but no tags. I
tagged
one top-level headline with :export: and exported to LaTeX with C-c C-e l. The
tagged headline and everything below it was exported, but so was the first
headline (and
On Mon, Jul 9, 2012 at 10:01 PM, SW sabrewo...@gmail.com wrote:
[FWIW, this link:
http://orgmode.org/worg/org-faq.php#keeping-current-with-Org%20mode-development
linked from here:
http://orgmode.org/org-mode-download.html
is broken.]
This is the correct link:
John Hendy jw.he...@gmail.com wrote:
I'm exporting a Beamer presentation with R babel blocks and my plots
are not centered. This should be a reproducible example:
-
#+startup: beamer
#+latex_class: beamer
#+options: toc:nil latex:t tex:t
#+latex_class_options: [presentation,bigger]
Looks fine to me ...
What does that mean? Are you getting the behaviour you are expecting.
If you want to strip a tree from export, you can use the COMMENT
keyword. I think the speed command is ; or something.
Note: With template not in place, I could see the problem that you
reported. Once
Jambunathan K kjambunathan at gmail.com writes:
Looks fine to me ...
What does that mean? Are you getting the behaviour you are expecting.
What I meant is that the export tags *are* correctly set in the template, so
only the :export: headlines *should* be exported, which, despite that
I can duplicate what you say. May be it is a bug...
ps: Text is no text with no whitespaces. All along we have been
focussed on text, when we should actually have been focussed on the
whitespace (or in this curious case, the missing whitepace)
SW sabrewolfy at gmail.com writes:
I have an
SW sabrewo...@gmail.com wrote:
SW sabrewolfy at gmail.com writes:
I have an org-file with many headlines of various levels, but no tags. I
tagged
one top-level headline with :export: and exported to LaTeX with C-c C-e l.
The
tagged headline and everything below it was exported, but
Nick Dokos nicholas.dokos at hp.com writes:
I can confirm that without the empty line the first subtree gets
exported as well as the (tagged) second one (but not the third one in my
minimal example). That's a bug.
But the minimal example I posted *did* include the initial empty line;
SW sabrewolfy at gmail.com writes:
That was my fault. I recall seeing other blank lines elsewhere in your
example, so I must have deleted them all. Apologies for the confusion.
I personally never have such blank lines in a document, so it was a
force of habit.
Why *did* you start that
suvayu ali fatkasuvayu+li...@gmail.com writes:
Hi:
I see all the source blocks are black, but the tokens are emphasised
Correct.
properly as per the syntax. Is it supposed to be like that (as in
black
Yes.
text not coloured as minted does for LaTeX export)?
Correct. However the reason
Jambunathan K kjambunathan at gmail.com writes:
I can duplicate what you say. May be it is a bug...
ps: Text is no text with no whitespaces. All along we have been
focussed on text, when we should actually have been focussed on the
whitespace (or in this curious case, the missing
On Mon, Jul 9, 2012 at 4:26 PM, Nick Dokos nicholas.do...@hp.com wrote:
John Hendy jw.he...@gmail.com wrote:
I'm exporting a Beamer presentation with R babel blocks and my plots
are not centered. This should be a reproducible example:
-
#+startup: beamer
#+latex_class: beamer
On Mon, Jul 9, 2012 at 11:55 PM, Luis Anaya papoan...@hotmail.com wrote:
suvayu ali fatkasuvayu+li...@gmail.com writes:
Hi:
I see all the source blocks are black, but the tokens are emphasised
Correct.
properly as per the syntax. Is it supposed to be like that (as in
black
Yes.
text
SW sabrewo...@gmail.com wrote:
SW sabrewolfy at gmail.com writes:
That was my fault. I recall seeing other blank lines elsewhere in your
example, so I must have deleted them all. Apologies for the confusion.
I personally never have such blank lines in a document, so it was a
force of
John Hendy jw.he...@gmail.com wrote:
On Mon, Jul 9, 2012 at 4:26 PM, Nick Dokos nicholas.do...@hp.com wrote:
John Hendy jw.he...@gmail.com wrote:
I'm exporting a Beamer presentation with R babel blocks and my plots
are not centered. This should be a reproducible example:
-
suvayu ali fatkasuvayu+li...@gmail.com writes:
Correct. However the reason is because of the way I wrote groff definition
in GNU source highlight. (i. e. black and white only).
GNU source highlight does support colorization. It is a matter of
mapping those colors to the right code in groff.
Hey Luis,
Looks good,
On Tue, Jul 10, 2012 at 2:00 AM, Luis Anaya papoan...@hotmail.com wrote:
I had to read on how to put colors in groff, at least I learned
something new today :).
Colorized version:
Source: http://ppl.ug/LN7rEdf2yS4/
PDF Output: http://ppl.ug/wlA1QvIDNSk/
You'll
Hello all,
On Tue, Jul 10, 2012 at 12:13 AM, Nick Dokos nicholas.do...@hp.com wrote:
o post an ECM to begin with - no ifs, ands or buts.
o post what you tested *exactly*.
o test what you (or somebody else) posted *exactly* as it was posted.
A comment with regards to the above; from
John Hendy jw.he...@gmail.com writes:
I have typically outputted graphics from R via tikzDevice manually,
but gave my first whirl to just including things via the :file
argument in my block header. In the process, I was trying to get this
to work and found I needed to use:
-
:results
suvayu ali fatkasuvayu+li...@gmail.com wrote:
Hello all,
On Tue, Jul 10, 2012 at 12:13 AM, Nick Dokos nicholas.do...@hp.com wrote:
o post an ECM to begin with - no ifs, ands or buts.
o post what you tested *exactly*.
o test what you (or somebody else) posted *exactly* as it
suvayu ali fatkasuvayu+li...@gmail.com writes:
Hi:
Does that mean a user can add any new language like this with her/his
definitions in their personal setup? If that is possible it would be
a really flexible setup.
Yes. If you sit down and create the language specification in GNU Source
Hey Luis,
On Tue, Jul 10, 2012 at 3:09 AM, Luis Anaya papoan...@hotmail.com wrote:
suvayu ali fatkasuvayu+li...@gmail.com writes:
Hi:
Does that mean a user can add any new language like this with her/his
definitions in their personal setup? If that is possible it would be
a really flexible
Hi,
On Tue, Jul 10, 2012 at 2:54 AM, Nick Dokos nicholas.do...@hp.com wrote:
suvayu ali fatkasuvayu+li...@gmail.com wrote:
Hello all,
On Tue, Jul 10, 2012 at 12:13 AM, Nick Dokos nicholas.do...@hp.com wrote:
o post an ECM to begin with - no ifs, ands or buts.
o post what you
running org-export-as-html on a subtree is currently problematic if
the result is to be merged into a document which contains html-ized
versions of other subtrees: the footnote references and definitions
get clobbered.
Do the subtrees come from the same org file?
Won't it look odd and
On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye t...@tsdye.com wrote:
John Hendy jw.he...@gmail.com writes:
I have typically outputted graphics from R via tikzDevice manually,
but gave my first whirl to just including things via the :file
argument in my block header. In the process, I was
Jambunathan K kjambunat...@gmail.com writes:
running org-export-as-html on a subtree is currently problematic if
the result is to be merged into a document which contains html-ized
versions of other subtrees: the footnote references and definitions
get clobbered.
Do the subtrees come from
Suhail Shergill suhailsherg...@gmail.com writes:
Jambunathan K kjambunat...@gmail.com writes:
running org-export-as-html on a subtree is currently problematic if
the result is to be merged into a document which contains html-ized
versions of other subtrees: the footnote references and
Jambunathan K kjambunat...@gmail.com writes:
Suhail Shergill suhailsherg...@gmail.com writes:
Jambunathan K kjambunat...@gmail.com writes:
running org-export-as-html on a subtree is currently problematic if
the result is to be merged into a document which contains html-ized
versions of
Won't it look odd and confusing to a reader, when there are two
different footnote definitions with the same number.
yes i agree that would be very confusing. but why, pray tell, would
there be two different definitions with the same number?
ayou haven't modified the description have
Suhail Shergill suhailsherg...@gmail.com writes:
i'm talking about a scenario where for one reason or another you may
not want to do that, but may instead only want to export the most
recent subtree which has been added (since the last time it was
exported).
You are trying to merge two
71 matches
Mail list logo
