[Emc-developers] Buildbot is down/or stuck

Hey Seb. Merry Christmas. Hope you are doing fine, Thanks for still hosting the buildbot. Chris Morley ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot(s)

d printers with no stability problems. Much longer uptimes than this wintel machine. So skip the troublesome bookworm. My $0,02... Original message From: andy pugh Date: 2024-09-15 10:34 a.m. (GMT-08:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot(s) On Su

Re: [Emc-developers] Buildbot(s)

active dev team becomes smaller, this problem becomes more important. Who has the knowledge to set up an alternative? Chris Sent from my Galaxy Original message From: andy pugh Date: 2024-09-15 10:34 a.m. (GMT-08:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot

Re: [Emc-developers] Buildbot(s)

On Sun, 15 Sept 2024 at 17:50, Greg C wrote: > Just wanted to bump this as it was brought up on the forum today. It seems > the buildbot(s) have been down since July. Docs arent being built. 2.9 debs are still being built, but only for Buster (which went out of LTS in July, so shouldn't be enc

Re: [Emc-developers] Buildbot(s)

**politely taps microphone ... is this thing on??** Just wanted to bump this as it was brought up on the forum today. It seems the buildbot(s) have been down since July. Docs arent being built. Is there a way to get this going again, or should we start to direct users to build their own package

[Emc-developers] Buildbot(s)

In the event this has somehow gone unnoticed, it seems both buildbots are broken. The html doc pages haven't been updated in quite some time. I believe Andy committed the PRs that fixed the conflits, but alas, they're still down. -Greg ___ Emc-develop

Re: [Emc-developers] buildbot is down

On 1/6/24 17:27, Chris Morley wrote: help please :) Thanks. Thanks for the bug report, the VM host crashed, fixed now. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/

[Emc-developers] buildbot is down

help please :) Thanks. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot Failing

On 12/6/23 18:06, Phill Carter via Emc-developers wrote: Buildbot is failing with the following: fatal: Unable to create '/home/buildslave/emc2-buildbot/wheezy-rtai-i386-clang/wheezy-rtai-i386-clang/source/.git/packed-refs.lock': Read-only file system Thanks for the bug report, this should be

[Emc-developers] Buildbot Failing

Buildbot is failing with the following: fatal: Unable to create '/home/buildslave/emc2-buildbot/wheezy-rtai-i386-clang/wheezy-rtai-i386-clang/source/.git/packed-refs.lock': Read-only file system ___ Emc-developers mailing list Emc-developers@lists.sou

Re: [Emc-developers] Buildbot Error

On 11/5/23 18:02, Phill Carter via Emc-developers wrote: It seems that Builder 4041.deb-buster-rtpreempt-amd64 has run out of disk space. Thanks for the bug report. Should be fixed now. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-d

[Emc-developers] Buildbot Error

It seems that Builder 4041.deb-buster-rtpreempt-amd64 has run out of disk space. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot

On 8/10/23 20:20, gene heskett wrote: ping On 8/10/23 13:33, gene heskett wrote: On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the wor

Re: [Emc-developers] Buildbot

On 8/10/23 13:33, gene heskett wrote: On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the lin

Re: [Emc-developers] Buildbot

On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the linuxcnc source code, builds and tests it,

Re: [Emc-developers] Buildbot

On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the linuxcnc source code, builds and tests it,

Re: [Emc-developers] Buildbot

On 8/10/23 10:45, Sebastian Kuzminsky wrote: On 8/10/23 02:31, Phill Carter via Emc-developers wrote: Buildbot seems to be asleep. Thanks for the bug report.  The Raspberry Pi 4 had crashed again and the buildbot was waiting for it, holding things up.  I rebooted it and now it's moving forwa

Re: [Emc-developers] Buildbot

Aah thanks. That is interesting. Do we have an ETA for the new build? How long does a build take usually? On 2023/08/10 18:08, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation

Re: [Emc-developers] Buildbot

On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the linuxcnc source code, builds and tests it, and builds & uploads its Raspberry Pi OS Bus

Re: [Emc-developers] Buildbot

Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? On 2023/08/10 16:44, Sebastian Kuzminsky wrote: On 8/10/23 02:31, Phill Carter via Emc-developers wrote: Buildbot seems to be asleep. Thanks for the bug report.  The Raspberry Pi 4 h

Re: [Emc-developers] Buildbot

On 8/10/23 02:31, Phill Carter via Emc-developers wrote: Buildbot seems to be asleep. Thanks for the bug report. The Raspberry Pi 4 had crashed again and the buildbot was waiting for it, holding things up. I rebooted it and now it's moving forward again. -- Sebastian Kuzminsky

[Emc-developers] Buildbot

Buildbot seems to be asleep. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot

Please correct me if I am wrong. The current buildbot hosted and mentioned by Seb: The buildbot currently consists of ~20 VMs, each with 2 CPUs, 4 GB RAM, and ~20 GB disk. The buildmaster has 200 GB disk, mostly to host the package archive some of those VMs can be retired when we EOL 2.8 The

[Emc-developers] Buildbot

Seb, I've been working with buildbot 3.6.1 and have it building a deb for me. Next task for me is to figure out how to setup a remote builder. On 11/15/2022 12:02 PM, Sebastian Kuzminsky wrote: On 11/14/22 18:43, m...@mattshaver.com wrote: On 2022-11-14 15:54, Sebastian Kuzminsky wrote: In

Re: [Emc-developers] buildbot? no updates in about a week now.

On Friday, 10 June 2022 09:12:50 EDT gene heskett wrote: > On Friday, 10 June 2022 08:12:14 EDT andy pugh wrote: > > On Fri, 10 Jun 2022 at 13:05, gene heskett > > wrote: > > > I just looked, no backports. > > > > This is a private "backport". ie the deb file is on the LinuxCNC > > repository. h

Re: [Emc-developers] buildbot? no updates in about a week now.

On Friday, 10 June 2022 08:12:14 EDT andy pugh wrote: > On Fri, 10 Jun 2022 at 13:05, gene heskett wrote: > > I just looked, no backports. > > This is a private "backport". ie the deb file is on the LinuxCNC > repository. https://www.linuxcnc.org/dists/buster/base/binary-amd64/ > > Including fo

Re: [Emc-developers] buildbot? no updates in about a week now.

On Fri, 10 Jun 2022 at 13:05, gene heskett wrote: > I just looked, no backports. This is a private "backport". ie the deb file is on the LinuxCNC repository. https://www.linuxcnc.org/dists/buster/base/binary-amd64/ Including for armhf: https://www.linuxcnc.org/dists/buster/base/binary-armhf/ S

Re: [Emc-developers] buildbot? no updates in about a week now.

On Friday, 10 June 2022 06:19:18 EDT andy pugh wrote: > On Fri, 10 Jun 2022 at 11:04, Sebastian Kuzminsky wrote: > > 1. Having the code & the docs live together in one repo makes it > > easier to update both when either changes (ie, in the same PR), and > > simplifies release management. > > It

Re: [Emc-developers] buildbot? no updates in about a week now.

On Fri, 10 Jun 2022 at 11:04, Sebastian Kuzminsky wrote: > 1. Having the code & the docs live together in one repo makes it easier > to update both when either changes (ie, in the same PR), and simplifies > release management. It also provides a way to see what new features are and how to use th

Re: [Emc-developers] buildbot? no updates in about a week now.

On 6/10/22 11:30, Jérémie Tarot wrote: What about splitting out the docs in dedicated packages like many other projects? We could have linuxcnc-doc for english and then linuxcnc-doc-$lang for translations. This in turn would allow us to build docs translation packages at will. In the future, t

Re: [Emc-developers] buildbot? no updates in about a week now.

Le jeu. 9 juin 2022 à 14:38, Sebastian Kuzminsky a écrit : > > > We could teach our debian packaging to know about build profiles > (https://wiki.debian.org/BuildProfileSpec) and then switch the CI to use > the `nodoc` build profile, but that would leave our poor old Buster > users without local

Re: [Emc-developers] buildbot? no updates in about a week now.

On 6/9/22 14:08, Hans Unzner wrote: I only wonder why Petters fix ( https://github.com/LinuxCNC/linuxcnc/pull/1754) which should use po4a only when the correct version is available, didn't resolve that. Petter's fix made the linuxcnc build system detect that the po4a on Buster is too old, and

Re: [Emc-developers] buildbot? no updates in about a week now.

On Thu, 9 Jun 2022 at 13:24, Greg C wrote: > > I am confused on this as well. Unless I am reading this incorrectly, there > were builds that did complete (albeit with warnings) after that commit was > merged? The issue in the logs seems to be a lack of pdf files to operate on. But the build sta

Re: [Emc-developers] buildbot? no updates in about a week now.

I am confused on this as well. Unless I am reading this incorrectly, there were builds that did complete (albeit with warnings) after that commit was merged? http://buildbot.linuxcnc.org/buildbot/grid On Thu, Jun 9, 2022 at 8:11 AM Hans Unzner wrote: > Am Do., 9. Juni 2022 um 11:25 Uhr schrieb

Re: [Emc-developers] buildbot? no updates in about a week now.

Am Do., 9. Juni 2022 um 11:25 Uhr schrieb Sebastian Kuzminsky < s...@highlab.com>: > On 6/9/22 10:42, andy pugh wrote: > > .deb builds are currently failing: > > > > > http://buildbot.linuxcnc.org/buildbot/builders/4041.deb-buster-rtpreempt-amd64/builds/1818 > > debs are failing because the wonder

Re: [Emc-developers] buildbot? no updates in about a week now.

On Thu, 9 Jun 2022 at 10:22, Sebastian Kuzminsky wrote: > So I think the best fix is to backport a working po4a to buster, and add > the updated po4a debs to our deb archive on wlo. > > I'm working on this now, hope to have something up later today. Thanks for that. I was planning to do exactly

Re: [Emc-developers] buildbot? no updates in about a week now.

On 6/9/22 10:42, andy pugh wrote: .deb builds are currently failing: http://buildbot.linuxcnc.org/buildbot/builders/4041.deb-buster-rtpreempt-amd64/builds/1818 debs are failing because the wonderful new translation infrastructure that just went into master requires a newer po4a than what's av

Re: [Emc-developers] buildbot? no updates in about a week now.

.deb builds are currently failing: http://buildbot.linuxcnc.org/buildbot/builders/4041.deb-buster-rtpreempt-amd64/builds/1818 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atl

[Emc-developers] buildbot? no updates in about a week now.

Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis

Re: [Emc-developers] buildbot seems down

On Sun, 10 Apr 2022 at 19:01, Sebastian Kuzminsky wrote: > This brings up a question though... The only value of the buildbot > (over github Actions) is that the buildbot tests with the RTAI kernel, > right? It also creates the debs that (generally) get put on the ISO. Though those could be sou

Re: [Emc-developers] buildbot seems down

On 4/10/22 10:50, andy pugh wrote: On Sun, 10 Apr 2022 at 15:54, Sebastian Kuzminsky wrote: Fixed, thanks for the bug report. Is there scope for a Bullseye builder? (I am wondering about Bullseye for 2.9) It's on my todo list, but i'm so distracted these days that it's slow going. The ma

Re: [Emc-developers] buildbot seems down

On Sun, 10 Apr 2022 at 15:54, Sebastian Kuzminsky wrote: > Fixed, thanks for the bug report. Is there scope for a Bullseye builder? (I am wondering about Bullseye for 2.9) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuse

Re: [Emc-developers] buildbot seems down

On 4/9/22 21:15, Chris Morley wrote: some builds say offline. Fixed, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] buildbot seems down

some builds say offline. Thanks for the help. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot Hung

On 1/10/22 4:39 PM, Phill C wrote: The Builbot appears to have been hung for a while. Kicked it, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/l

[Emc-developers] Buildbot Hung

The Builbot appears to have been hung for a while. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot Asleep

I notice that buildbot is pushing for a migration to python3, and linuxcncs buildbot runs python 2.7 could it be this that is the issue http://buildbot.linuxcnc.org/buildbot/about http://buildbot.net/ On Mon, 3 Jan 2022, 00:59 Phill Carter, wrote: > Buildbot seems to not want to leave 202

Re: [Emc-developers] Buildbot Asleep

On Sunday, January 2, 2022 8:17:01 PM EST Phill Carter wrote: > Haha, me too. :) > > > On 3 Jan 2022, at 12:15 pm, Sam Sokolik wrote: > > > > I don't understand why any one or thing would want to stay in 2021.. Get in line guys... > > On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > >> Bu

Re: [Emc-developers] Buildbot Asleep

Haha, me too. :) > On 3 Jan 2022, at 12:15 pm, Sam Sokolik wrote: > > I don't understand why any one or thing would want to stay in 2021.. > > On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > >> Buildbot seems to not want to leave 2021. >> >> >> ___

Re: [Emc-developers] Buildbot Asleep

I don't understand why any one or thing would want to stay in 2021.. On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > Buildbot seems to not want to leave 2021. > > > ___ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://l

[Emc-developers] Buildbot Asleep

Buildbot seems to not want to leave 2021. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot

On 3/6/21 11:49 PM, Phill Carter wrote: Buildbot has a lost slave. Bounced, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-d

[Emc-developers] Buildbot

Buildbot has a lost slave. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

Buildbot appears to be asleep Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] BuildBot

On 12/30/20 8:08 PM, Phill Carter wrote: Buildbot seems to have been asleep for a while. The wheezy-i386 buildslave locked up, I rebooted it and now the buildbot is making progress again. Thanks for the bug report. -- Sebastian Kuzminsky ___ Em

Re: [Emc-developers] BuildBot

On Wednesday 30 December 2020 22:08:51 Phill Carter wrote: > Buildbot seems to have been asleep for a while. I'll agree, nothing new for wintel stuff in close to a week. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in

[Emc-developers] BuildBot

Buildbot seems to have been asleep for a while. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot stuck.

On Monday 21 December 2020 17:02:18 Chris Morley wrote: > Season greetings Seb. I'll 2nd that. Take care and stay well Seb. > Thanks for kicking the buildbot from time to time. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Pleas

[Emc-developers] Buildbot stuck.

Season greetings Seb. Thanks for kicking the buildbot from time to time. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot

You can provide email I’d of that person who can help us for developing our own cnc controller. Sent from myMail for iOS Wednesday, 14 October 2020, 9:39 PM +0530 from off...@klepp.biz : >Anno domini 2020 Wed, 14 Oct 19:05:58 +0300 >  jdsmoti...@gmail.com scripsit: >> >> Dear Sir, >> >>

Re: [Emc-developers] Buildbot

Anno domini 2020 Wed, 14 Oct 19:05:58 +0300 jdsmoti...@gmail.com scripsit: > > Dear Sir, > > We have our own hardware systems which can support to Linux. > > We know Linux cnc is open source plateform but we don’t know how to create > our own GUI and how to develop it. > > If anyone support t

Re: [Emc-developers] Buildbot

Dear Sir, We have our own hardware systems which can support to Linux. We know Linux cnc is open source plateform but we don’t know how to create our own GUI and how to develop it. If anyone support then we are ready to pay the development cost. Thanks  Sent from myMail for iOS Wednesday

Re: [Emc-developers] Buildbot

On Wed, 14 Oct 2020 at 15:02, wrote: > > We would like developing CNC controller with Linux platform. > > Are you right person for support? If yes then we will share our project > details. Yes and no. We are the right place to discuss LinuxCNC, but that is already a working CNC controller. --

Re: [Emc-developers] Buildbot

Hello Team, How are you? We would like developing CNC controller with Linux platform. Are you right person for support? If yes then we will share our project details. Thanks  Sent from myMail for iOS Wednesday, 14 October 2020, 2:09 AM +0530 from seb.kuzmin...@gmail.com : >On 10/10/20 7

Re: [Emc-developers] Buildbot

On 10/10/20 7:18 PM, Phill Carter wrote: Buildbot appers to be be asleep. Fixed. Thanks for the bug report. When the buildbot takes a vacation it's nearly always because one of the builders crashed and needs to be manually rebooted. -- Sebastian Kuzminsky ___

[Emc-developers] Buildbot

Buildbot appers to be be asleep. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot Stopped

The Buildbot seems to having a lazy lunch. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot home page

Original message From: andy pugh Date: 8/9/20 7:29 pm (GMT+10:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot home page On Sat, 5 Sep 2020 at 04:34, Phill Carter wrote:>> I took the liberty of editing the Buildbot home page to reflect the release

Re: [Emc-developers] Buildbot home page

On Sat, 5 Sep 2020 at 04:34, Phill Carter wrote: > > I took the liberty of editing the Buildbot home page to reflect the release > of 2.8 > > It may be previewed here: > >

[Emc-developers] Buildbot home page

I took the liberty of editing the Buildbot home page to reflect the release of 2.8 It may be previewed here: > Cheers, Phill. __

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 13:01, Phill Carter wrote: > So it is OK to push changes to 2.8? You might as well. I have no idea what to do about the release now -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and

Re: [Emc-developers] Buildbot problems?

> On 1 Sep 2020, at 6:27 pm, andy pugh wrote: > > On Tue, 1 Sep 2020 at 00:52, Phill Carter wrote: > >> Thanks, I forgot to change the install instructions in the PlasmaC manual to >> reflect the change to 2.8 > > The online docs are always the latest, so the only thing that will > miss yo

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 00:52, Phill Carter wrote: > Thanks, I forgot to change the install instructions in the PlasmaC manual to > reflect the change to 2.8 The online docs are always the latest, so the only thing that will miss your next commit is the distributed PDF files that are in the insta

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 03:41, Dewey Garrett wrote: > The 'Address already in use' probably relates to an earlier problem and > likely needs manual intervention or a reboot of the reporting buildbot > instance(s). A reboot will (conventionally) rm the LOCKFILE in /tmp > as well. This is getting c

Re: [Emc-developers] Buildbot problems?

> It seems most of the errors relate to IO control > relate to a version error > iocontrol: machine: 'unknown' version 'unknown' this message is informational -- not an error that would cause termination >> Application initialization failed: no display name and no $DISPLAY >> environment varia

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > > I think that there are problems with the buildbot, but I know not what. I think I might have found the problem. On the builders that fail the tests we see 59 instances of this sequence: Running test: /home/buildslave/emc2-buildbot/wheezy-rtpre

Re: [Emc-developers] Buildbot problems?

> On 1 Sep 2020, at 9:48 am, andy pugh wrote: > > On Tue, 1 Sep 2020 at 00:20, Phill Carter wrote: > >> Is it too lateyet to add anything to 2.8? > > Yes. > But I don't think that 2.8.1 will be that long in coming. There is a > lot more Spanish translation due, for one thing. Thanks, I for

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 00:20, Phill Carter wrote: > Is it too lateyet to add anything to 2.8? Yes. But I don't think that 2.8.1 will be that long in coming. There is a lot more Spanish translation due, for one thing. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designe

Re: [Emc-developers] Buildbot problems?

> On 1 Sep 2020, at 8:38 am, andy pugh wrote: > > On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > >> Four of the builders are failing runtests, but it isn't so much the >> tests that are failing as LinuxCNC itself. > > I have just realised that the three failed builds after my failed > (2.

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > Four of the builders are failing runtests, but it isn't so much the > tests that are failing as LinuxCNC itself. I have just realised that the three failed builds after my failed (2.8) build were master. I don't know if Master is building cleanly

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 23:18, andy pugh wrote: > http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/2207/steps/get-dmesg/logs/stdio > > It looks like motion-logger is segfaulting. Though I guess that might be effect rather than cause. Perhaps it is trying to cl

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > > I think that there are problems with the buildbot, but I know not what. I have just noticed that one of the 4 sometimes dumps a dmesg: http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/2207/steps/get-dmesg/log

Re: [Emc-developers] Buildbot problems?

On Monday 31 August 2020 12:56:10 andy pugh wrote: > I think that there are problems with the buildbot, but I know not > what. > > Four of the builders are failing runtests, but it isn't so much the > tests that are failing as LinuxCNC itself. > > http://buildbot.linuxcnc.org/buildbot/builders/161

Re: [Emc-developers] Buildbot problems?

Andy, It seems most of the errors relate to IO control relate to a version error iocontrol: machine: 'unknown' version 'unknown' So do we need to change another version in the code? This seems to be where the error comes from on a cursory glance. https://github.com/LinuxCNC/linuxcnc/blob/2.8/s

[Emc-developers] Buildbot problems?

I think that there are problems with the buildbot, but I know not what. Four of the builders are failing runtests, but it isn't so much the tests that are failing as LinuxCNC itself. http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/2206/steps/runtests/logs/std

[Emc-developers] Buildbot stuck

It looks like one of the buildythings has crashed -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _

Re: [Emc-developers] Buildbot output

On Wednesday 05 August 2020 13:52:34 Gene Heskett wrote: > On Wednesday 05 August 2020 12:35:38 andy pugh wrote: > > Can anyone interpret what is going on here? > > > > http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386 > >/b uilds/5596/steps/shell_3/logs/warnings%20%2830%29 > >

Re: [Emc-developers] Buildbot output

On Wednesday 05 August 2020 12:35:38 andy pugh wrote: > Can anyone interpret what is going on here? > > http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/b >uilds/5596/steps/shell_3/logs/warnings%20%2830%29 > > It looks disturbingly corrupted. I've seen something like that befo

[Emc-developers] Buildbot output

Can anyone interpret what is going on here? http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/5596/steps/shell_3/logs/warnings%20%2830%29 It looks disturbingly corrupted. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial u

[Emc-developers] Buildbot

The package builds for 2.8 Buster Rpi4 are failing. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

Buildbot appears to have stopped. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

The Buildbot appears to be hung. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

Buildbot seems to be down Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

Buildbot ppears to be asleep. Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot

2.8 packages or docs don't appear to have been built since April 10 ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Buildbot - master branch

master branch packages and docs don’t appear to have updated since 2020-04-03 ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot

On Mon, 30 Mar 2020 at 01:28, Phill Carter wrote: > > I cannot access the discs directory nor the waterfall I can get to the waterfall (and other results) but not /dists -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses,

[Emc-developers] Buildbot

I cannot access the discs directory nor the waterfall Cheers, Phill. ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot Looks Stuck

On 3/7/20 1:04 AM, Chris Morley wrote: Hey Seb ..when you get a moment :) Fixed it, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo

[Emc-developers] Buildbot Looks Stuck

Hey Seb ..when you get a moment :) Thank you! Chris ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

  1   2   >