]
Sent: Monday, March 17, 2008 12:08 PM
To: Lothar Schmidt; Eugene Peyzner; Frank Krozel; emc-p...@ieee.org;
john.merr...@us.schneider-electric.com
Subject: RE: Cell Phone field strength
That was my thinking too, that they are calculated.
But that does not necessarily make them inaccurate
...@us.schneider-electric.com
Subject: RE: Cell Phone field strength
That was my thinking too, that they are calculated.
But that does not necessarily make them inaccurate.
They could be accurate by luck, we need more data in order to support
either position.
Does anyone have contact
.
p.con...@hp.com
From: Lothar Schmidt [mailto:lothar.schm...@cetecomusa.com]
Sent: Monday, March 17, 2008 1:57 PM
To: Conway, Patrick R (Houston); Eugene Peyzner; Frank Krozel;
emc-p...@ieee.org; john.merr...@us.schneider-electric.com
Subject: RE: Cell Phone field strength
If you look
Of Conway,
Patrick R (Houston)
Sent: Monday, March 17, 2008 11:10 AM
To: Eugene Peyzner; Frank Krozel; emc-p...@ieee.org;
john.merr...@us.schneider-electric.com
Subject: RE: Cell Phone field strength
Thanks for the pointer to the Conformity article.
The table, Table 2, does not seem to have
: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Eugene Peyzner
Sent: Friday, March 14, 2008 8:59 PM
To: Frank Krozel; emc-p...@ieee.org; john.merr...@us.schneider-electric.com
Subject: Re: Cell Phone field strength
RF Field depends on cell phone type.
Check Table 2 in Ron Brewer and Dawn
; john.merr...@us.schneider-electric.com
Sent: Friday, March 14, 2008 7:35 AM
Subject: Re: Cell Phone field strength
John, it has been a long time ago, but... I recall measuring 800Mhz/analog
at about 12V/m at 1cm.
Don't have any knowledge of newer ones.
Regards, Frank Krozel
http
You might find pertinent information here http://www.mthr.org.uk/
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Frank
Krozel
Sent: 14 March 2008 14:35
To: emc-p...@ieee.org; john.merr...@us.schneider-electric.com
Subject: Re: Cell Phone field strength
John, it has been a long
since 1971
EMC MiniSymposium - http://www.emcchicago.org/sectfiles/events.htm
- Original Message -
From: john.merr...@us.schneider-electric.com
To: emc-p...@ieee.org
Sent: Friday, March 14, 2008 9:17 AM
Subject: Cell Phone field strength
Does anyone have good numbers for the RF Field
Does anyone have good numbers for the RF Field strength from a hand held Cell
Phone at 1 cm
distance?
Thanks in advance
John Merrill
Product Safety Engineer
Schneider Automation
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.Website:
9 matches
Mail list logo