Cronin; emc-p...@majordomo.ieee.org
Subject: Re: Average Measurements above 1 GHz
There is somewhere a HP app note on how to perform CISPR average
measurements (by calculating the VBW vs frequency). It was written for
the 8566/8568 analyzers Its about 15 yrs old but someone on this list
should
There is somewhere a HP app note on how to perform CISPR average
measurements (by calculating the VBW vs frequency). It was written for
the 8566/8568 analyzers Its about 15 yrs old but someone on this list
should have it. I lost mine and I don't recall the exact title. What I
do, is to use a VBW
John,
You are correct in noting that the current proposal for limits above 1 GHz
in CISPR 22 uses a peak detector, rather than the average detector called
out in the FCC Rules. This has been a major issue in the US CISPR G TAG.
While we have gotten other items fixed, we have been unable to get
--
From: Scott Douglas[SMTP:s_doug...@ecrm.com]
Reply To: Scott Douglas
Sent: Wednesday, September 08, 1999 8:08 AM
To: 'croni...@hotmail.com'; emc-p...@majordomo.ieee.org
Subject: RE: Average Measurements above 1 GHz
John,
MY HP 8591EM will in fact
John,
Characteristics of average measuring receivers for
measuring disturbance levels in the range from
9 kHz to 1 GHz are given in CISPR Publication 16-1.
Limits for radiated disturbances above 1 GHz
are peak detector levels, the only detector to be
used for determining compliance above 1
John,
MY HP 8591EM will in fact perform average measurements. The manual makes
specific reference to CISPR 11 and CISPR 16 for compliances. The analyzer
is rated to 1.8 GHz. The HP 8593 series goes even higher.
Scott
s_doug...@ecrm.com
-Original Message-
From: croni...@hotmail.com
6 matches
Mail list logo