and over 10 minutes maximum
Note: Voltage drop should not go over 4V while doing this test
Thank you.
Best regards,
Binayak Marahatta
Product Compliance Engineer
KEB AMERICA, INC.
5100 Valley Industrial Blvd. South
USA - Shakopee, MN 55379
United States
www.kebamerica.com
Email:
binayak.maraha
using 508C if needed after this Feb.1st
deadline ?
Hope it helps!
Thank you.
Best regards,
Binayak Marahatta
Product Compliance Engineer
www.kebamerica.com
Email:
binayak.maraha...@kebamerica.com
Phone:
Main Phone: 952-224-1400 Ext. 1458
Linkedin:
https://www.linkedin.com/company/keb
Hello Sudhakar,
I am just trying to understand here.
India is CB Scheme member but it does not accept any CB test report and
they also have in country test requirement using BIS standard instead
i don't understand it . Please clarify the steps and process including
advantage of using CB
Hello Bostjan,
You might want to check utility accessible equipment because utility wants
to integrate its use into their standard practices and procedures.
Thank you.
Best regards,
Bin
From: Doug Powell doug...@gmail.com
To: EMC-PSTC@LISTSERV.IEEE.ORG,
Date:
Dear experts,
We wanted to do Verification under FCC rules and We have Digital Class A
product ( touch display for industrial application only). Test required
for verification process is OK (No harmful interference at Industrial
environment). This device has been tested and found to comply
for the
addressee(s) named above. Any use by an unintended recipient is strictly
prohibited. If you have received this e-mail in error, please contact the
sender and delete it from your system.
From: Thomas Cokenias t...@tncokenias.org
To: Binayak Marahatta binayak.maraha...@kebamerica.com,
Cc
, if I remember correctly, addresses the
ability of the voltage source to arc across the gap formed when the fuse
ruptures and the 700 V rating would be insufficient in an 840 V circuit.
Gary
From: Binayak Marahatta [mailto:binayak.maraha...@kebamerica.com]
Sent: Friday, June 28, 2013 8:38 AM
Hello Intelligent group,
The maximum DC bus voltage on our units is 840 VDC.
I found UL recognized DC 700 V category fuses and rated current starting
from 35 A to 315 A.
Could anyone suggest 700 VDC voltage category enough for our 840 VDC
units?
Thank you.
Best regards,
Bin
Please also see the abstract part of ISO 18019
http://www.iso.org/iso/iso_catalogue/catalogue_ics/catalogue_detail_ics.htm?csnumber=30804
Thank you.
Best regards,
Bin
From: Brian Oconnell oconne...@tamuracorp.com
To: EMC-PSTC@LISTSERV.IEEE.ORG
Date: 04/19/2013 11:17 AM
Subject:
[mailto:emc-p...@ieee.org]On Behalf Of Peter
Tarver
Sent: Friday, April 05, 2013 9:28 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: RE: [PSES] What are the any local utility requirement for grid
tied equipment in USA?
From: Binayak Marahatta
Sent: Thursday, April 04, 2013 12:58
Does anyone familiar
Does anyone familiar with any local utility requirement for grid tied
equipment ( Industrial Inverter/ Converter) in USA?
(Mains connection for use locally at the facility or onto the main line
grid when the facility does not demand the full output of the device)
Thank you for your help.
or a mandatory recall ordered by the
Commission.
See the website below for more detail if you are interested to
know more.
http://www.cpsc.gov/en/
Thank you.
Best regards,
Binayak Marahatta
Electrical Standards Conformity Engineer
KEB AMERICA, INC.
5100 Valley Industrial Blvd. South
USA
12 matches
Mail list logo