...@emccompliance.com]
Sent: Friday, November 16, 2001 1:05 PM
To: Pommerenke, David; 'ravinder ajmani'; marti...@appliedbiosystems.com
Cc: emc-p...@majordomo.ieee.org
Subject: Re: Pre-amps
Note I am replying to all. What is the measurement inaccuracy associated
with a mismatch if the transmission line
as a unit. Problem solved.
--
From: Pommerenke, David davi...@ece.umr.edu
To: 'Ken Javor' ken.ja...@emccompliance.com, 'ravinder ajmani'
ajm...@us.ibm.com, marti...@appliedbiosystems.com
Cc: emc-p...@majordomo.ieee.org
Subject: RE: Pre-amps
Date: Fri, Nov 16, 2001, 12:36 PM
Ken
; 'ravinder ajmani'; marti...@appliedbiosystems.com
Cc: emc-p...@majordomo.ieee.org
Subject: Re: Pre-amps
Note I am replying to all. What is the measurement inaccuracy associated
with a mismatch if the transmission line is vanishingly short (relative to a
wavelength)?
--
From: Pommerenke
...@us.ibm.com, marti...@appliedbiosystems.com
Cc: emc-p...@majordomo.ieee.org
Subject: RE: Pre-amps
Date: Fri, Nov 16, 2001, 8:10 AM
Dear Ken,
I am thinking you are missing something (hope that I am correct).
If you simply shorten the cable to zero, the problem of the missmatch, and
the effect
...@ece.umr.edu]
Sent: Friday, November 16, 2001 9:10 AM
To: 'Ken Javor'; 'Ravinder Ajmani'; marti...@appliedbiosystems.com
Cc: emc-p...@majordomo.ieee.org
Subject:RE: Pre-amps
Dear Ken,
I am thinking you are missing something (hope that I am correct).
If you simply shorten the cable
, 2001 5:51 PM
To: Pommerenke, David; 'Ravinder Ajmani';
marti...@appliedbiosystems.com
Cc: emc-p...@majordomo.ieee.org
Subject: Re: Pre-amps
If input VSWR for preamp and output VSWR for antenna are both bad, then
it
seems a simple solution is to connect preamp input to antenna output and
let
50 Ohm
...@majordomo.ieee.org
Subject: Re: Pre-amps
Joe,
HP (Agilent) make good Pre-amps for different frequency ranges. If you are
looking for an economical solution then you may try Com Power Corp. at
(949) 587-9800.
Regards, Ravinder
PCB Development and Design Department
IBM Corporation
Email: ajm...@us.ibm.com
...@appliedbiosystems.com, emc-p...@majordomo.ieee.org
nmina.comcc:
Subject: RE: Pre-amps
11/14/01 01:03
PM
Please respond
to john.shinn
What
-Original Message-
From: marti...@appliedbiosystems.com
[mailto:marti...@appliedbiosystems.com]
Sent: Wednesday, November 14, 2001 10:15 AM
To: emc-p...@majordomo.ieee.org
Subject: Pre-amps
I am having some difficulties locating manufacturers that
provide preamps
with a 20-22dB
I read in !emc-pstc that marti...@appliedbiosystems.com wrote (in
of931a5cdb.ac7941d8-on88256b04.0063e...@pe-c.com) about 'Pre-amps', on
Wed, 14 Nov 2001:
I am having some difficulties locating manufacturers that provide preamps
with a 20-22dB gain.
You wouldn't care to suggest a frequency
Joe,
HP (Agilent) make good Pre-amps for different frequency ranges. If you are
looking for an economical solution then you may try Com Power Corp. at
(949) 587-9800.
Regards, Ravinder
PCB Development and Design Department
IBM Corporation
Email: ajm...@us.ibm.com
John
Do you know the full name of Com-Power or its www address?
Thank You
KC Chan
jestuckey jestuc...@micron.com 06/29/01 12:43am
Com-Power 2122Pre-amp 500 MHz to 22 GHz $6,500.00
PA-122
Very flat response curve. I have been very happy with mine.
Regards,
JOHN E.
You need to use a bandwidth of 1MHz above 1GHz remember.
---
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your
Subject: Re: Pre-amps
for EMC Use
o.ieee.org
I have used Miteq or Mini-Circuits preamps with a custom box (Al project
box) and a 15Vdc regulator. These had around 20dB of gain which was
sufficient at 3 or 1 meter for most frequencies between 1 - 18 GHz. The
exact model that we used has been discontinued though and I am unsure if
a
-Original Message-
From: andrew.p.pr...@baesystems.com
[mailto:andrew.p.pr...@baesystems.com]
Sent: Thursday, June 28, 2001 8:59 AM
To: emc-p...@majordomo.ieee.org
Subject: Pre-amps for EMC Use
Hi everyone
Can anyone help, I am trying to identify a per-amplifier low
noise gain 29dB
Com-Power 2122Pre-amp 500 MHz to 22 GHz $6,500.00
PA-122
Very flat response curve. I have been very happy with mine.
Regards,
JOHN E. STUCKEY
EMC Engineer
Micron Technology, Inc.
Integrated Technology Group
Micron Architectures Lab
8455 West Emerald
Boise, ID 83704
Ph.
17 matches
Mail list logo