Is there a way to link a signal from parport to halui.program.run to use a
momentary switch for run?
I've tried but just can't seem to get it.
Using standard_pinout net halui.program.run parport.1.pin-12-in-not
ties it to the parport to but the program still will only run from halui or
tkemc
Greetings guys;
As some of you know from IRC, I found the keyboard problem, it seems logitech
thought it would be a good idea to have a function keys lock, and dummy me
never noticed the led that tally's they are active when it went out as I was
moving the keyboard around. Furthest thing from
Congrats Gene.
On Sun, 2007-05-06 at 10:56 -0400, Gene Heskett wrote:
And if I had write perms on the wiki, I'd
record it there for future references.
Look at
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?BasicSteps
It'll tell you how to set yourself up to edit pages. I believe I'd
start
On Sunday 06 May 2007, Ray Henry wrote:
Congrats Gene.
On Sun, 2007-05-06 at 10:56 -0400, Gene Heskett wrote:
And if I had write perms on the wiki, I'd
record it there for future references.
Look at
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?BasicSteps
Thanks, I'll take a look at that when
Gene Heskett wrote:
Greetings guys;
newsig motion.probe-input bit
linkps parport_pin-10-input = motion.probe-input
You are only making half the connection.
You're an electronics guy, are you familiar with the concept of
netlists? A net connects two or more pins. Or how about wiring
On Sunday 06 May 2007, John Kasunich wrote:
Gene Heskett wrote:
Greetings guys;
newsig motion.probe-input bit
linkps parport_pin-10-input = motion.probe-input
You are only making half the connection.
You're an electronics guy, are you familiar with the concept of
netlists?
Not really, John,
Today EMC 2.1.5 is released with the following changes:
* set default gains in sum2 component to one instead of zero, so by default
it sums its inputs
* AXIS: pass ini file name along to POSTGUI_HALFILE
* pickconfig: make keypad enter key work like main enter key - issue OK
* halmeter: fix bug
On Sunday 06 May 2007, Chris Radek wrote:
Today EMC 2.1.5 is released with the following changes:
* set default gains in sum2 component to one instead of zero, so by default
it sums its inputs
* AXIS: pass ini file name along to POSTGUI_HALFILE
* pickconfig: make keypad enter key work like main
On Sun, May 06, 2007 at 09:03:19PM -0400, Gene Heskett wrote:
* fix constraint violation right after a probing move
I don't believe I hit that one, what might the symptoms be?
On steppers, a joint following error. The violation was minor so I
doubt it would have been noticed on a servo
On Sun, May 06, 2007 at 08:36:07PM -0500, Chris Radek wrote:
I've added this to the list of discussion topics planned for the
upcoming CNC workshop (June). We may get a chance to work on it if
there's time and interest. One obstacle is that I don't think we have
a probe among us.
I meant
On Sunday 06 May 2007, Chris Radek wrote:
On Sun, May 06, 2007 at 09:03:19PM -0400, Gene Heskett wrote:
* fix constraint violation right after a probing move
I don't believe I hit that one, what might the symptoms be?
On steppers, a joint following error. The violation was minor so I
doubt it
Gene, You should find a lighter spring if possible.
I don't think Chris will need the type of probe that you and I have made.
To do a crawling type of probing algorithm they will require a probe
that can side trigger as well.
Chris, I'll have to dig up my notes, but I did come up with a
12 matches
Mail list logo
