I resemble that remark... ;-)
Mark
At 02:32 PM 5/29/2009, you wrote:
quite a few are certifiable :)
On Fri, May 29, 2009 at 12:59 PM, Kirk Wallace
kwall...@wallacecompany.com wrote:
A certification program will be needed, TuxCE, EMC2CE (half joking, but
maybe not).
--
--
you can
Terry wrote:
I was using the channel/axis3 on my 7i33 board to generate
the +/- 10VDC for my VFD
Here are the lines I had in my m5i20 config files (io file)
#Spindle speed from DAC 03 scale
newsig spinspeed float
linksp spinspeed = motion.spindle-speed-out
linksp spinspeed =
Dear sir:
There is an error which I thought I could fix it. But I failed. The following
is the error:
yang...@yangdan-desktop:~/emc2/src$ make
Depending emc/usr_intf/axis/extensions/emcmodule.cc
Depending emc.1
make: Entering directory `/home/yangdan/emc2/src'
Compiling
Hi all,
I took the attached post off of the Mach2 e-mail list. Apparently
this fellow has built a cad cam system and would like make it open
source. I don't know enough to advise him but maybe some her could join
that list and post some good advice to him that would be helpful. If
this
The toolkit from Rab is a script that runs inside GMAX and generates
G-code for 5 and maybe 6 axis motion. GMAX is a free #D design
package used mostly by animators. Everything runs on Windows.
See: http://www.cnc-toolkit.com/cnc_toolkit.html
Steve Stallings
-Original Message-
From:
I need a splash screen for GWiz. My thoughts are Tux with wizard hat and
maybe some EMC relatedstuff.
I also need a small icon to stick in the upper left corner of the window.
If there is someone out there with some artistic skills who can create
these, I'd appreciate it.
Thanks,
Ken
There are two main classes of license you should consider when you can
set the licenseing for a piece of software: GPL[1] or BSD[2]. (the
debian-legal list frequently suggests zlib and mit licenses as
other alternatives for permissive licenses if you don't like BSD for
some reason)
GPL vs BSD is
Jerry Boman wrote:
Well, of course I'm for the Wichita show as I am only 35 miles east of
Wichita and need help information to retrofit a large (appx 7000 lb) Sajo
tracer mill I have. I have postings about it on Linux EMC forum and have
pics posted on picasa here
Hi,
I'm looking for inspiration as to how I can use a 12 volt
6-8 Amp motor
to drive my mini-mill spindle. I'm currently using an old
mains voltage
teleprinter motor which, although it does the job admirably,
is as noisy
as hell and I have to leave the room while it screeches
away. I've now
Hi
I tried out the hm2 today
I get an error from this group of lines in my .io file
# Connect limit/home switch outputs to motion controller.
newsig Xminlim bit
newsig Xmaxlim bit
newsig Xhome bit
linksp Xminlim = hm2_5i20.0.gpio.024.in-not
linksp Xminlim = axis.0.neg-lim-sw-in
linksp Xmaxlim
attachment: clip.jpgattachment: clip0001.jpg--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers brand creativity professionals. Meet
the minds behind Google
Terry wrote:
I tried to turn one of my screws and watch the screen-
the DRO is much,much greater than the amount the machine
moved.
my .ini file for each axis was copied and pasted
from my old m5i20 .ini file so I doubt that is the problem
Is there somewhere else I could be getting the
Terry wrote:
I tried out the hm2 today
I get an error from this group of lines in my .io file
# Connect limit/home switch outputs to motion controller.
newsig Xminlim bit
newsig Xmaxlim bit
newsig Xhome bit
linksp Xminlim = hm2_5i20.0.gpio.024.in-not
linksp Xminlim =
Terry wrote:
Hi,
I tried to turn one of my screws and watch the screen-
the DRO is much,much greater than the amount the machine
moved.
It would be helpfull to know what much much is. Put a ruler on the
machine table, move the axis 1 inch by the DRO, and see how much it
moved on the
Gentlemen,
What is Roland up to these days?
thanks
Stuart
--
you can lead a person to knowledge
but you cannot make him think
--
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of
Hi,
This is the problem line in the servo file
setp hm2_[HOSTMOT2](BOARD).0.encoder.00.scale 2000
this line does not use the .ini file input scale
Chris had the fix below
Maybe a note on this or change the hm2 servo.hal file
to use the ini file or you guys will answer this question
more
Terry wrote:
This is the problem line in the servo file
setp hm2_[HOSTMOT2](BOARD).0.encoder.00.scale 2000
this line does not use the .ini file input scale
Chris had the fix below
Maybe a note on this or change the hm2 servo.hal file
to use the ini file or you guys will answer this
17 matches
Mail list logo