On 7 Apr 2012, at 22:06, Jeshua Lacock jes...@3dtopo.com wrote:
OK, so I just have to give them a list of how my parallel port pins are
connected to my Gecko 320s then?
Basically, yes, though there are a number of other folk who can make firmwares
(including me) and the instructions are on
Hi
I have old leadwell milling machine made in 1987.
control Fanuc 10M
Spindle with gear. and tool changer simple. driven with 2 air cylinder.
No hydraulic.
did anyone retrofit Fanuc spindle 15 hp, with 2 speed gear box , and
tool changer with EMC2?
beside Mazak at Cardinal Engineering
On Apr 8, 2012, at 12:35 AM, Andy Pugh wrote:
On 7 Apr 2012, at 22:06, Jeshua Lacock jes...@3dtopo.com wrote:
OK, so I just have to give them a list of how my parallel port pins are
connected to my Gecko 320s then?
Basically, yes, though there are a number of other folk who can make
On 4/7/2012 12:34 PM, Mark Cason wrote:
On 04/07/2012 10:54 AM, gene heskett wrote:
You will recall I had to do something that blacklisted ipv6 in order to get
any network connection at all on the lathe box, but that message has been
expired now and I don't recall what it was that I had
On 4/7/2012 4:49 PM, Andy Pugh wrote:
One would normally adjust it until it has the right effect, but to a first
approximation a Gain of 1/10 means that the output is the average of 10
samples, though it isn't actually a rolling average as such. The code is
_very_ simple:
anyone know if there is any logic to the variety of conical mating surfaces
used in machine tools?
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications
On Apr 8, 2012, at 5:10 AM, Jeshua Lacock wrote:
I was just thinking about the set up as I understand it (i.e. the Mesa card
replacing my parallel port connected directly to the Geckos). It seems like
the encoders would have to connect to the Mesa card to benefit from any
increased encoder
Hi Aram,
Our Enshu is just as you describe. You are welcome to our configs and/or
you are welcome to come here to see the installation. It would probably be
best if you came here for a show and tell. That would be fun.
Stuart
On Apr 8, 2012 2:38 AM, a...@conceptmachinery.com wrote:
Hi
I have
NIH (not invented here) and I can make it better. These attitudes during
the development gave us a variety. :)
On Apr 8, 2012 7:14 AM, charles green xxzzb...@yahoo.com wrote:
anyone know if there is any logic to the variety of conical mating
surfaces used in machine tools?
On Sunday, April 08, 2012 09:25:12 AM Mark Wendt (Contractor) did opine:
On 4/7/2012 12:34 PM, Mark Cason wrote:
On 04/07/2012 10:54 AM, gene heskett wrote:
You will recall I had to do something that blacklisted ipv6 in order
to get any network connection at all on the lathe box, but that
2012/4/8 Jeshua Lacock jes...@3dtopo.com:
I emailed Mesa to inquire about purchasing, and it looks like I would want
the firmware set to support the Gecko 540. (that is the only Gecko controller
they list support for).
What support in firmware does one or other particular drive need, if
it
Charles,
metric tapers of any diameter (size 30 to 80, for machine tools) all
have the same angle, which is (alpha/2)=1.432 degrees . Morse tapers,
however, all have different angles alpha/2:
Morse angle degrees
0 1.491
1 1.429
2 1.431
3 1.438
4 1.488
5
On 8 Apr 2012, at 05:12, charles green xxzzb...@yahoo.com wrote:
anyone know if there is any logic to the variety of conical mating surfaces
used in machine tools?
http://www.tools-n-gizmos.com/specs/Tapers.html
Is a useful list. The spindle-nose tapers are all the same, but with
On 4/8/2012 9:29 AM, gene heskett wrote:
On Sunday, April 08, 2012 09:25:12 AM Mark Wendt (Contractor) did opine:
On 4/7/2012 12:34 PM, Mark Cason wrote:
On 04/07/2012 10:54 AM, gene heskett wrote:
You will recall I had to do something that blacklisted ipv6 in order
to
Sorry for the off topic, but I'd like to get GLX working on a 10.04
system so I can remote ssh -X LinuxCNC. The PC has an Intel chipset. I
am currently using the vesa driver because the i810 driver crashes. The
8.04 i810 driver works fine. I had the idea that maybe I could just put
my 8.04 disk in
In case this has bothered others here, I found a way to get rid of those
blasted mouse-over hint bubbles.
http://www.wilderssecurity.com/showthread.php?t=285770
free at last.
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/index.html
California, USA
Hi Andy,
That was a typo, I was doing it right in the actual code. So I tried the
code again today and it's working now. Tool comp must have been left on
and I failed to explicitly turn it off at the beginning of my program.
Joel
On Sat, Apr 7, 2012 at 10:58 PM, Andy Pugh bodge...@gmail.com
I don't know if you're committed to the Mesa cards yet but have you checked out
Pico System's step and direction card. It's more expensive but may be a better
fit for the Gecko drives.
http://pico-systems.com/osc2.5/catalog/product_info.php?cPath=4products_id=30
We are like tenant farmers
On Apr 8, 2012, at 4:11 PM, Greg Bernard wrote:
I don't know if you're committed to the Mesa cards yet but have you checked
out Pico System's step and direction card. It's more expensive but may be a
better fit for the Gecko drives.
On Sunday, April 08, 2012 07:31:15 PM Shaffin Bhanji did opine:
Hello,
I am trying to configure EMC, and what I run into is that when I move an
axis (say x-axis) 7, the machine actually moves 3.5. I have the
following leadscrew 3/8-12tpi using a Xylotex board. Can someone guide
me what I
On Sun, 8 Apr 2012, Jeshua Lacock wrote:
Date: Sun, 8 Apr 2012 15:14:15 -0600
From: Jeshua Lacock jes...@3dtopo.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
1947...@att.net
--
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2
On Apr 8, 2012, at 5:43 PM, Peter C. Wallace wrote:
On Sun, 8 Apr 2012, Jeshua Lacock wrote:
Date: Sun, 8 Apr 2012 15:14:15 -0600
From: Jeshua Lacock jes...@3dtopo.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
On 8 Apr 2012, at 13:57, Shaffin Bhanji shaffin.bha...@gmail.com wrote:
when I move an
axis (say x-axis) 7, the machine actually moves 3.5
If you are using Stepconf it means that Xylotex microstepping and Stepconf
microstepping don't agree.
24 matches
Mail list logo
