> I am setting XHC HB04 wireless pendant up. I am almost satisfied how
> everything works except for bouncy buttons.
Did you maybe found any good workaround to prevent unwanted switching from
world to joint mode after executing MDI command programmed for certain button?
On 21 November 2013 10:32, James zou wrote:
> I want to know if i can compiling kinematics with the ja3,i mean just use
> the "comp",not compiling all the software ,because i just want to
> test the kinematics,i hope someone can help me
> thanks all.
I think that if you execute the rip-environme
Hi All,
An updated version 1.3.1 of gcmc is available. Changes include:
- Add circle_cw(_r) and circle_ccw(_r) functions for full circles. Arcs
cannot unambiguously create circles because the center-point cannot be
calculated from the radius alone.
- Fix command-line segfault in long options --in
Quote:
On 11/21/2013 12:41 AM, Marius Liebenberg wrote:
> Charles you might find that any M code will cause a slight stoppage of
> the head as the M codes are not computed like gcodes with constant
> velocity in mind but rather as a separate command. Also it is not a
> motion command so there
On 21 November 2013 16:32, Marius Alksnys wrote:
> I am thinking which way to go:
> 1. add debouncing to the pendant driver
> 2. use additional 'debounce' components in hal
> 3. Change halui behaviour to take only one input pin for start / pause /
> resume program or start / stop the spindle and
On 11/21/2013 12:57 AM, Bertho Stultiens wrote:
>>> While pondering, I thought it could also be used to visualize the path
>>> taken in general. Attached are two images of the gcmc examples as SVG
>>> paths images.
>> is it feasable to load dxf's the same way as svg ?
>> i'd definately have a need
On Thu, Nov 21, 2013 at 08:08:57PM +, andy pugh wrote:
> On 21 November 2013 16:32, Marius Alksnys wrote:
>
> > I am thinking which way to go:
> > 1. add debouncing to the pendant driver
> > 2. use additional 'debounce' components in hal
> > 3. Change halui behaviour to take only one input pi
2013/11/21 andy pugh
https://mail.google.com/mail/u/0/?view=cm&fs=1&tf=1&to=bodge...@gmail.com>
>
> I think that if you execute the rip-environment script then comp will
> install the module in the correct place.
>
That didn't work for me, I asked some time ago. Comp still places the .ko
file to
On 11/21/2013 10:34 AM, Kent A. Reed wrote:
> On 11/20/2013 5:11 PM, Charles Steinkuehler wrote:
>> On 11/20/2013 3:10 PM, Kent A. Reed wrote:
>>> On 11/20/2013 2:35 PM, Charles Steinkuehler wrote:
RCN already has some switches to do part of this (see --spl and
<...>
>>> I was thinking th
I am setting XHC HB04 wireless pendant up. I am almost satisfied how
everything works except for bouncy buttons. The problem is actual for
start button, which starts the program, the pause button and the spindle
button.
Due to halui pin structure I am using 'toggle2nist' component. But it
lack
On 11/20/2013 5:11 PM, Charles Steinkuehler wrote:
> On 11/20/2013 3:10 PM, Kent A. Reed wrote:
>> On 11/20/2013 2:35 PM, Charles Steinkuehler wrote:
>>> RCN already has some switches to do part of this (see --spl and
>>> <...>
>> I was thinking the default would be to use the cached files while
>>
On 11/21/2013 12:41 AM, Marius Liebenberg wrote:
> Charles you might find that any M code will cause a slight stoppage of
> the head as the M codes are not computed like gcodes with constant
> velocity in mind but rather as a separate command. Also it is not a
> motion command so there will be n
Thanks andy
I mean compiling kinematics module,you are correct,i compiling the software
to install ja3,so i can run the software ja3 and Linuxcnc2.5.3 to control
my machine.but now,i want to compiling a new kinematics,i just want to know
if i can only compiling it,not recompiling all the software,j
Hi All,
I was built a machine,and i wrote the kinematics，so i want to test it,i
know the "comp" method,but i have a question, i installed linuxcnc on my
computer from liveCD,than,i updated it to Linuxcnc2.5.3.and i also
installed ja3 used "run in place".
I want to know if i can compiling kinemati
Hi folks!
- Original message -
> Charles you might find that any M code will cause a slight stoppage of
> the head as the M codes are not computed like gcodes with constant
> velocity in mind but rather as a separate command. Also it is not a
> motion command so there will be no motion
15 matches
Mail list logo
