It doesn't matter, the wheel diameter is going to change in time due to use so
it will effect the final part dims, this is why cam grinding requires multiple
passes [one reason].
I've seen machine tools that use lasers to measure wear on end mills and such,
I suppose that is possible w/ a
Ries, I'm curious as to how you calculated or quantified your RIO on your
CAD/CAM package? I've been looking for a direct way
to do this for years, w/ little in the way of clear or concise results.
I completely agree with your assessment of CAD/CAM and it's level of
integration. I've done CAM
As a comparison I typically route wood at +/-100ipm [80-130 typically] and 1/2
cutter at 1/2-3/4 DOC. At these speeds a full cut is possible, but
you need to be cranking at 18K or so [using a 3hp spindle]. This equates to a
0.011 chip on a bit w/ two cutting edges (100ipm x 2)/18000rpm=
ordinary
cheap
2 flute carbide cutters work well enough.
Les
On 28/04/11 18:45, H J Johnson wrote:
As a comparison I typically route wood at +/-100ipm [80-130
typically] and 1/2 cutter at 1/2-3/4 DOC. At these speeds a
full cut is possible, but
you need to be cranking at 18K or so
isn't particularly powerful.
As is so often the case there are few hard and fast rules. What
works
great for one person doesn't work so well for someone else.
Les
On 28/04/11 23:01, H J Johnson wrote:
Les, I've run it faster w/ a lighter cut but I found that my
best material removal
Just make sure the ones you buy are rated for the torque you need. The level of
transmittable torque is the weakest link in a HD.
Fwiw
J. Johnson
- Original Message -
From: Peter Blodow p.blo...@dreki.de
Date: Thursday, December 30, 2010 5:48 am
Subject: Re: [Emc-users] synchronous
I haven't any experiance w/ these but for the money I'd recommend a Granite
Devices, similar cost in a proven drive. I use them and LOVE them.. really very
nice to set up and use and they have additional features over what is listed on
these.
Fwiw
J. Johnson
- Original Message -
From:
Sounds like you are working the butt of that machine, in which
case it
sure ought to pay for good lead screws. I belong to some lists of
home
boat builders. I would really like to build a router about 4ft x
16ft .
I could cut out complete boat kits and in a home shop there would
I assume they mean that once tensioned, it will not give and lose
it's tension.
Knowing the belt modulus or stiffness it is a very simple calculation.
Unfortunately I haven't been able to find that critical number for
that belt type.
Not wanting to re-open a can of worms, but there
Hey there Aram, I built my own router. I work as an industrial designer
build heavy equipment for steel mills and the like. Designing and
building my own machine was a natural fit. My router is 20 x 10 [ft]
and has ~30 of Z travel [which will soon be more like 50]
I've not yet built the B/C axis
drives]
Thanks VERY much for your help and advice..
J. Johnson [totally out of my comfort zone w/ this stuff :) ]
H J Johnson wrote:
I'm a new user when it comes to Linux and am interested in moving
from Mach3. However not being a programer of any depth, I'm a
little leary of taking
want to start
mapping out the process and seeing if I can make it work. :)
Thanks again!
J. Johnson
H J Johnson wrote:
Steven, thanks for taking the time to reply. I'm by no means a
programernor do I expect that I'd get proficient at it in the
time frame needed [or to
the level that would
:46 PM, H J Johnson
hjjohn...@sasktel.netwrote:
Thanks Steve, this was infact my plan. I've got a bunch of
G202's and
steppers sitting around. It would
be fairly simple to load it up and start playing and get my feet
wet that
way.. we'll see how things progress
from there. I'm
Thanks!! Looks like I've got more reading to do! :)
J. Johnson
You might want to see:
http://wiki.debian.org/
Some keys to getting hardware info:
http://wiki.xtronics.com/index.php/Hardware-info_bios
While this information is for Debian - Ubuntu is a kludged up
version of Debian
My suggestion is to just replace the pinion as most of the wear is
there. At some point it maybe necessary to replace the rack as
well.
Of course if the amount of engagement is adjustable there may
well be a
lot more service gotten out of the pinions as well.
I'm a new user when it comes to Linux and am interested in moving from Mach3.
However not being a programer of any depth, I'm a little leary of taking a
working machine and trying to convert it to linux and possibly ending up w/ a
machine that isn't working. My main reason for moving to Linux
16 matches
Mail list logo