Rick it is not a huge affair. Just specify in the ini file TYPE= ANGULAR
for that axis
-- Original Message --
From: "Rick Lair" <r...@superiorroll.com>
To: "Emc Users" <emc-users@lists.sourceforge.net>
Sent: 2015-11-13 16:38:43
Subject: [Emc-users] 4th
On Friday 13 November 2015 09:38:43 Rick Lair wrote:
> Hello Guys,
>
> Does anyone know in the documentation where to get any info on setting
> up my rotary axis, I can't find any thing in the manuals on how to get
> it connected properly, without doing a bunch of excess programming.
Its an axis
On Friday 13 November 2015 10:55:18 Rick Lair wrote:
> I was wondering more about these pins,
>
> 21 bit IN FALSE axis.3.is-unlocked
> 21 bit OUT FALSE axis.3.unlock
>
> The servo setup isn't the issue, I already have that stuff in my
> INI/HAL files, I was just
I was wondering more about these pins,
21 bit IN FALSE axis.3.is-unlocked
21 bit OUT FALSE axis.3.unlock
The servo setup isn't the issue, I already have that stuff in my INI/HAL
files, I was just wondering about those pins mentioned, if they will
take care of
To each his own,,,
The servo and drive will be here Tuesday, so it will be busy busy after
that, we have a job coming in already, that requires the 4th axis.
Always Fun ;)
On 11/13/2015 1:22 PM, Bruce Layne wrote:
> Hey Rick! Your 500 pound 4th axis weighs more than Gene's G0704 milling
>
Hey Rick! Your 500 pound 4th axis weighs more than Gene's G0704 milling
machine!
On 11/13/2015 12:41 PM, Rick Lair wrote:
> Here is a twin to our unit that I am fitting up.
>
> http://www.ebay.com/itm/Tsudakoma-12-6-inch-RNCM-301R-4th-axis-power-rotary-table-/261732300386
>
>
>
> On
Here is a twin to our unit that I am fitting up.
http://www.ebay.com/itm/Tsudakoma-12-6-inch-RNCM-301R-4th-axis-power-rotary-table-/261732300386
On 11/13/2015 12:17 PM, Gene Heskett wrote:
> On Friday 13 November 2015 10:55:18 Rick Lair wrote:
>
>> I was wondering more about these pins,
>>
>>
On Friday 13 November 2015 12:41:57 Rick Lair wrote:
> Here is a twin to our unit that I am fitting up.
>
> http://www.ebay.com/itm/Tsudakoma-12-6-inch-RNCM-301R-4th-axis-power-r
>otary-table-/261732300386
>
And the cabinet either of my mills is sitting on would be a Prince Albert
can under
Hello Guys,
Does anyone know in the documentation where to get any info on setting
up my rotary axis, I can't find any thing in the manuals on how to get
it connected properly, without doing a bunch of excess programming.
--
Thanks
Rick Lair
Superior Roll & Turning LLC
399 East Center