Dirk bigengin...@... writes:
snip...
So, if you want to make a large polariscope, find a LCD monitor, get
the filters out and glue them on a piece of glass.
I googled this about polariscopes:
http://www.ecu.edu/glassblowing/glassstress.html That should make it
clear.
One remark
Gene Heskett gene.hesk...@... writes:
snip...
I think I'd ask to forgo the lightening cavities entirely.
I talked with my customer this morning and got permission to forgo the
cavities. So the Gene Heskett V8 triple tree is born...
snip...
You would I think, enjoy the trip if you stop and
Hello all you bicyclers,
I thougt this EMC was a machine controlling forum, but machining machines,
not riding machines. Let's confine ourselves to machine control and
exchange construction hints (how thick should the stock be?) and
motorbiking experiences at other news congregations.
Best
On Friday 16 January 2009, Tom wrote:
Gene Heskett gene.hesk...@... writes:
snip...
I think I'd ask to forgo the lightening cavities entirely.
I talked with my customer this morning and got permission to forgo the
cavities. So the Gene Heskett V8 triple tree is born...
That makes me feel much
On Friday 16 January 2009, Peter blodow wrote:
Hello all you bicyclers,
I thougt this EMC was a machine controlling forum, but machining machines,
not riding machines. Let's confine ourselves to machine control and
exchange construction hints (how thick should the stock be?) and
motorbiking
Weeell Gene,
of course, I'm no cold technocrat with no other interest (even bike rider
in Summer, too). It's just that: I have been following those EMC
discussions only since I heard about EMC for the first time shortly before
Xmas. Since then, I've been trying to pick up as much information
On Fri, 2009-01-16 at 19:24 +0100, Peter blodow wrote:
... snip
At the moment I feel like if I were in a pool
without knowing much about swimming. Therefore, I need to watch and listen
to others who know more about swimming, listening to motorbike talk doesn't
bring me forward.
I sense a
On Jan 15, 2009, at 10:11 PM, Tom wrote:
Dave Engvall dengv...@... writes:
snip...
One trick is to machine the part out of plexiglas and then heat to
stress relieve.
Then stress the part and view with polarized light; one can see the
stress points and engineer the
design to compensate
On Friday 16 January 2009, Peter blodow wrote:
Weeell Gene,
of course, I'm no cold technocrat with no other interest (even bike rider
in Summer, too). It's just that: I have been following those EMC
discussions only since I heard about EMC for the first time shortly before
Xmas.
Ahh, welcome! Do
Peter blodow p.blo...@... writes:
snip...
A couple of days ago when I read the discussions about getting
hit by electricity because of poor (or no) grounding of the VFD I felt
cold shudders down my back... I learned electricity and house wiring at my
Michigan high school back in 1965 and
The P number is how far you want to deviate from your path to maintain speed.
http://www.linuxcnc.org/docview/html//gcode_main.html#sub:G61,-G61.1,-G64:
The important part about the P number is if you use it it turns on the naive
cam detector
which is important when running fast with lots of
Great work. Congrats!
Regards,
Alex
- Original Message -
From: Tom kestrel...@yahoo.com
To: emc-users@lists.sourceforge.net
Sent: Thursday, January 15, 2009 7:22 AM
Subject: [Emc-users] Successful Emc2 conversion (happy dance...)
Emc2 community,
I finally produced my first part
On Thursday 15 January 2009, Tom wrote:
Tom kestrel...@... writes:
Sorry for the repeated image. That was supposed to be...
http://www.foxpointdesign.com/cnc_stuff/ttclamp1-sm.jpg
Tom
I have to say that is absolutely beautiful work, Tom. You should be proud to
display it to potential
On Jan 15, 2009, at 7:22 AM, Gene Heskett wrote:
On Thursday 15 January 2009, Tom wrote:
Tom kestrel...@... writes:
Sorry for the repeated image. That was supposed to be...
http://www.foxpointdesign.com/cnc_stuff/ttclamp1-sm.jpg
Tom
I have to say that is absolutely beautiful work, Tom.
Gene Heskett gene.hesk...@... writes:
snip...
But since I'm an old biker myself, I would never install a part like that on
my bike, I have first hand seen the results of a broken one. At about 45mph.
At first we thought he would be in a wheelchair the rest of his life, but he
never
Can you spell product liability insurance? I consider that to be an
expensive, but necessary evil.
Finite element analysis, fatigue testing, and destructive testing might
also be useful.
Ken
Dave Engvall wrote:
On Jan 15, 2009, at 10:38 AM, Tom wrote:
Jon Elson el...@... writes:
snip...
tomp tomp-...@... writes:
snip...
something like this slotted tube may work on the knee screw
raise knee way up
insert spacer
drop knee onto spacer
raise knee
remove spacer
you get 2 known positions from an axis w/o a readout :)
(hmm or more with a set of spacers)
Hi tomp,
Thanks
Kenneth Lerman kenneth.ler...@... writes:
snip...
Can you spell product liability insurance? I consider that to be an
expensive, but necessary evil.
Finite element analysis, fatigue testing, and destructive testing might
also be useful.
Ken
Hi Ken,
Those are my customer's concerns. I
Jon Elson el...@... writes:
snip...
This is for a ** V8 ** bike? Is this a showpiece, or something somebody
is going to ride a lot?
The milling of parts like this tends to leave sharp inside corners that
worsens the problem. You might be able to get a stronger part by using
a
Dave Engvall dengv...@... writes:
snip...
One trick is to machine the part out of plexiglas and then heat to
stress relieve.
Then stress the part and view with polarized light; one can see the
stress points and engineer the
design to compensate from that knowledge.
Hi Dave,
Wow!
On Jan 15, 2009, at 1:11 PM, Tom wrote:
Dave Engvall dengv...@... writes:
snip...
One trick is to machine the part out of plexiglas and then heat to
stress relieve.
Then stress the part and view with polarized light; one can see the
stress points and engineer the
design to compensate
On Thursday 15 January 2009, Tom wrote:
Gene Heskett gene.hesk...@... writes:
snip...
But since I'm an old biker myself, I would never install a part like that
on my bike, I have first hand seen the results of a broken one. At about
45mph. At first we thought he would be in a wheelchair the
Emc2 community,
I finally produced my first part on my new Kasuga/Emc2 (Mesa 5i20/7i33) knee
mill conversion. I am very happy with the results! The mill will do 500 ipm
rapids, and feeds so far can hit 30 ipm with very accurate results. Lots of tiny
moves tend to slow the feedrates down a bit,
sweet - thanks for the videos and pictures
On Wed, Jan 14, 2009 at 11:22 PM, Tom kestrel...@yahoo.com wrote:
Emc2 community,
I finally produced my first part on my new Kasuga/Emc2 (Mesa 5i20/7i33) knee
mill conversion. I am very happy with the results! The mill will do 500 ipm
rapids, and
Tom wrote:
I finally produced my first part on my new Kasuga/Emc2 (Mesa 5i20/7i33) knee
mill conversion. I am very happy with the results! The mill will do 500 ipm
rapids, and feeds so far can hit 30 ipm with very accurate results. Lots of
tiny
moves tend to slow the feedrates down a bit,
Tom kestrel...@... writes:
Youtube videos: If you click on the blue Watch video in high quality in the
lower rh corner you can see the screen text.
The part in the photos in the down facing side of a triple tree clamp. I like
that side because of the visible machine work. The circular ring
On Thu, 2009-01-15 at 05:22 +, Tom wrote:
Emc2 community,
I finally produced my first part on my new Kasuga/Emc2 (Mesa 5i20/7i33) knee
mill conversion. I am very happy with the results! The mill will do 500 ipm
... snip
Bravo Tom. You do nice work.
-
Kirk
Tom wrote:
Tom kestrel...@... writes:
Youtube videos: If you click on the blue Watch video in high quality in the
lower rh corner you can see the screen text.
The part in the photos in the down facing side of a triple tree clamp. I like
that side because of the visible machine work. The
Sebastian Kuzminsky s...@... writes:
Nice machine you got there
For the lots of tiny moves, are you using Continuous Path Mode, G64?
Thank you Sebastian,
I was under the impression that G64 is the default. I have not tried using G64
with the P- parameter. Say, for example, if I was
tomp tomp-...@... writes:
interesting idea about short stroke but
(appartently) longer manual backslide
do you go from some stop to another or end of stroke to end of stroke
for the 2 sets?
thanks
tomp
Tomp,
I think what you are asking is if I have the knee set up as a sort of auxiliary
On Thu, Jan 15, 2009 at 05:47:34AM +, Tom wrote:
I quickly learned that your reference tool has to be
the shortest one in the table, since all offset variables must be positive
integers. It was actually easier to program the nasty old Bandit III
controller for tool offsets - as much as
Tom kestrel...@... writes:
Sorry for the repeated image. That was supposed to be...
http://www.foxpointdesign.com/cnc_stuff/ttclamp1-sm.jpg
Tom
--
This SF.net email is sponsored by:
SourcForge Community
SourceForge
Chris Radek ch...@... writes:
snip
Not true - tool lengths can be positive or negative. I set up the
demo job at CNC workshop last year with the reference tool being the
longest and everything else shorter (negative offset).
In EMC2.3/AXIS you will be able to use touch off to set tool
Tom
ok, you move the knee
fwiw
something we used to do on the quill may be of help
we'd slit a piece of conduit
grind it to length
and put it between the Bport quill nut and the end of the slot the nut
rides in
this gives you a fast mechanical offset
something like this slotted tube may work
Kirk Wallace kwall...@... writes:
Bravo Tom. You do nice work.
-
Thanks Kirk!
--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
35 matches
Mail list logo