Hi Gene!
On 12.07.2014 04:12, Gene Heskett wrote:
...
And they stop (no errors reported) for what should be a continuous jog
after 3 or 5 seconds, needing a release and fresh push on the arrow keys.
...
I know this effect, it happens when the machine is not homed. When you
jog in the
I looked into PNCconf with the prob_x2 XML file.
I found a bug caused by Peters's XML's not using the same labels as
linuxcnc's XMLs. It caused some of the GPIO pins not to show.
I will push a fix.
Great. Downloadable by itself? URL?
I will push to 2.5.x but it is a one line
On Saturday 12 July 2014 02:16:05 Philipp Burch did opine
And Gene did reply:
Hi Gene!
On 12.07.2014 04:12, Gene Heskett wrote:
...
And they stop (no errors reported) for what should be a continuous
jog after 3 or 5 seconds, needing a release and fresh push on the
arrow keys.
...
I believe you just explained it. And I can't home using the present BOB
wiring, home switches are on no pin because I'll have to edit that into
the .hal file which I have not done yet. PncConf does not know about home
switches yet, or at least I've not found them in the menu's.
Cheers,
On Saturday 12 July 2014 02:52:13 Chris Morley did opine
And Gene did reply:
I looked into PNCconf with the prob_x2 XML file.
I found a bug caused by Peters's XML's not using the same labels as
linuxcnc's XMLs. It caused some of the GPIO pins not to show.
I will push a fix.
On Saturday 12 July 2014 03:26:23 Chris Morley did opine
And Gene did reply:
I believe you just explained it. And I can't home using the present
BOB wiring, home switches are on no pin because I'll have to edit
that into the .hal file which I have not done yet. PncConf does not
know about
From: ghesk...@wdtv.com
To: emc-users@lists.sourceforge.net
Date: Sat, 12 Jul 2014 03:54:28 -0400
Subject: Re: [Emc-users] Where to get latest PncConf?
On Saturday 12 July 2014 02:52:13 Chris Morley did opine
And Gene did reply:
I looked into PNCconf with the prob_x2 XML file
On Saturday 12 July 2014 15:05:19 Chris Morley did opine
And Gene did reply:
From: ghesk...@wdtv.com
To: emc-users@lists.sourceforge.net
Date: Sat, 12 Jul 2014 03:54:28 -0400
Subject: Re: [Emc-users] Where to get latest PncConf?
On Saturday 12 July 2014 02:52:13 Chris Morley did opine
Gene,
I noticed a new branch with pncconf on it.
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=summary
JT
On 7/10/2014 7:21 AM, Gene Heskett wrote:
I am hitting a road block on setting up the 5i25 when trying to move
functions to the pins of the BOB I am using, and was wondering if there
On Friday 11 July 2014 06:21:25 John Thornton did opine
And Gene did reply:
Gene,
I noticed a new branch with pncconf on it.
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=summary
JT
Thanks John. I had some fun finding it, accidentally pulled the whole 20
Mb tarball, but it wasn't in
On Friday 11 July 2014 06:54:23 Gene Heskett did opine
And Gene did reply:
On Friday 11 July 2014 06:21:25 John Thornton did opine
And Gene did reply:
Gene,
I noticed a new branch with pncconf on it.
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=summary
JT
Thanks John. I
Gene,
Look in src/emc/usr_intf/pncconf
JT
On 7/11/2014 6:03 AM, Gene Heskett wrote:
On Friday 11 July 2014 06:54:23 Gene Heskett did opine
And Gene did reply:
On Friday 11 July 2014 06:21:25 John Thornton did opine
And Gene did reply:
Gene,
I noticed a new branch with pncconf on it.
I assume to run pncconf you do the standard things like build it etc and
set the environment the just type in pncconf.
JT
On 7/11/2014 6:03 AM, Gene Heskett wrote:
On Friday 11 July 2014 06:54:23 Gene Heskett did opine
And Gene did reply:
On Friday 11 July 2014 06:21:25 John Thornton did
So I just pulled the new_pncconf branch then switched to that branch
with git.
In the terminal I typed
cd src
./autogen.sh
./configure
make
sudo make setuid
cd ..
. ./scripts/rip-environment
pncconf
and walla the new Pncconf is up and running.
JT
On 7/11/2014 6:03 AM, Gene Heskett wrote:
On
On Friday 11 July 2014 07:16:34 John Thornton did opine
And Gene did reply:
Gene,
Look in src/emc/usr_intf/pncconf
JT
I copied that dir to a scratchpad space, but my python might be too old.
2.6.5. Does this need the python3 I see in synaptic?
On Friday 11 July 2014 07:30:22 John Thornton did opine
And Gene did reply:
So I just pulled the new_pncconf branch then switched to that branch
with git.
In the terminal I typed
cd src
./autogen.sh
./configure
I had to install missing pkgs
make
Had to use sudo for make, mc is bad dog
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 11:26:33 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf
On Fri, 11 Jul 2014, Gene Heskett wrote:
I can do that without a lot of problems I think.
to read your current configurations pinout
Here's the latest mesaflash source:
https://github.com/micges/mesaflash/archive/master.zip
IOW Peter, I'll have to rip up the current BOB wiring. I was
On Friday 11 July 2014 11:36:20 Peter C. Wallace did opine
[...]
Here's the latest mesaflash source:
https://github.com/micges/mesaflash/archive/master.zip
The archive subdir does not exist from either this machine, or the
lathes machine, I tried both Firefox and git. ??
Thanks Peter.
On Friday 11 July 2014 14:45:45 Peter C. Wallace did opine
And Gene did reply:
On Fri, 11 Jul 2014, Gene Heskett wrote:
I can do that without a lot of problems I think.
to read your current configurations pinout
Here's the latest mesaflash source:
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 14:54:32 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 14:57:32 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf?
On Friday 11 July 2014 11:36:20 Peter C. Wallace did opine
[...]
Here's the latest mesaflash source:
https://github.com/micges/mesaflash/archive/master.zip
The archive subdir does not exist
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf?
On Friday 11 July 2014 14:45:45 Peter C. Wallace did opine
And Gene did reply:
On Fri, 11 Jul 2014, Gene Heskett wrote:
I can do that without a lot of problems I think.
to read your current
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf?
On Friday 11 July 2014 14:45:45 Peter C. Wallace did opine
And Gene did reply:
On Fri, 11 Jul 2014, Gene Heskett wrote:
I can do that without a lot of problems I think.
to read your current
On Friday 11 July 2014 21:46:47 Chris Morley did opine
And Gene did reply:
From: ghesk...@wdtv.com
To: emc-users@lists.sourceforge.net
Date: Fri, 11 Jul 2014 15:58:31 -0400
Subject: Re: [Emc-users] Where to get latest PncConf?
pncconf seems unable to handle that stepgen
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 22:12:23 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf?
On Friday 11 July 2014 15:04:08 Peter C. Wallace did opine
And Gene did reply:
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 14:57:32 -0400
From: Gene Heskett ghesk...@wdtv.com
I am hitting a road block on setting up the 5i25 when trying to move
functions to the pins of the BOB I am using, and was wondering if there is
a newer version available.
Thanks.
Cheers, Gene Heskett
--
There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo.
29 matches
Mail list logo
