] pin configuration for diy xyz stepper controller
On 10 April 2010 19:10, N Z supersp...@hotmail.com wrote:
net all-homes-and-limits = parport.0.pin-13-in
Did i make any obvious mistake, or is there a way to ignore also the other
limit switches during homing?
I thought you had
] pin configuration for diy xyz stepper controller
Andy Pugh pravi:
ie, assuming that Pin 11 is the all limits and all homes pin then
set it to be the combined pin for the X axis and then edit the hal
file to combine all the axes on one pin.
Something like:
net all-homes-and-limits
On 10 April 2010 19:10, N Z supersp...@hotmail.com wrote:
net all-homes-and-limits = parport.0.pin-13-in
Did i make any obvious mistake, or is there a way to ignore also the other
limit switches during homing?
I thought you had at first, but then noticed that you linked the other
pins to
On 9 April 2010 15:43, N Z supersp...@hotmail.com wrote:
I have all limit switches connected on one pin and would like to use them
also for homing.
but there is no info... Is there a reason for this option not beeing
available?
All options are available, but not all options have been
Andy Pugh pravi:
ie, assuming that Pin 11 is the all limits and all homes pin then
set it to be the combined pin for the X axis and then edit the hal
file to combine all the axes on one pin.
Something like:
net all-homes-and-limits parport.0.pin-11-in-not = axis.0.home-sw-in
