From that refund I'd buy some books and read up on some 'stuff'.
So I can help myself...
Rainer
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
hi everyone
I do a lot of cutting for my rc modelling projects through Rhinocam and axis.
Now people start asking me to cut for them, which is very pleasing. So far I
used to prepare one g-code file for
- engraving labels
- bevelling (where needed)
- cutting inner contours
- cutting outer
Check this chapter in the manual:
http://linuxcnc.org/docs/2.3/html/gcode_main.html#r3_7
Regards, Jan
On Sat, Jul 4, 2009 at 13:08, Chris Epicierseuch...@yahoo.de wrote:
hi everyone
I do a lot of cutting for my rc modelling projects through Rhinocam and axis.
Now people start asking me to
Steve
Sounds good, A two and a half hours drive is not bad if the whack is of
high quality. For now, I'll just step on a rake!
Plus, I'm not nearly so eager for punishment now that the files are being
processed and the machine is plotting away beside me.
regards
Cal
I think you're
Richard:
No one is here with the intent to make you mad, deceive you, or coerce you
into developing something. As near as I can determine, everyone has tried to
be patient and caring. The trouble is, these dedicated people are trying to
advance the EMC project, provide support, and
On Saturday 04 July 2009, James Reed wrote:
Richard:
No one is here with the intent to make you mad, deceive you, or coerce you
into developing something. As near as I can determine, everyone has tried
to be patient and caring. The trouble is, these dedicated people are
trying to advance
On Saturday 04 July 2009, Chris Epicier wrote:
hi everyone
I do a lot of cutting for my rc modelling projects through Rhinocam and
axis. Now people start asking me to cut for them, which is very pleasing.
So far I used to prepare one g-code file for
- engraving labels
- bevelling (where
Richard Acosta wrote:
Maybe if you try to pay more attention and take some time to understand
what you read and realize noone asked for YOUR PREFERENCE (Quoted).
You could find (if you read) that i have explained about the way i
installed the system and than i did it the same way you did.
Jeff Epler wrote:
Works as documented here. (PROBEOPEN filename.txt) immediately created
filename.txt in the same directory as my inifile.
Jeff
--
My apologies Jeff,
when I looked the file was in the same
Dear Jan
Check this chapter in the manual:
http://linuxcnc.org/docs/2.3/html/gcode_main.html#r3_7
Regards, Jan
===
3.7 Calling Files
To call a file name the file the same as your call and include a sub and
endsub. The
seuch...@yahoo.de wrote:
Dear Jan
Check this chapter in the manual:
http://linuxcnc.org/docs/2.3/html/gcode_main.html#r3_7
Regards, Jan
===
3.7 Calling Files
To call a file name the file the same as your call and
Hi guys
When i updated from 6.06 to 8.04 the backplot display in AXIS
does not display properly. It renders horizontal lines all over the screen.
the horizontal line are actually the backplot .
gxlgears loads and does something similar.
I tried manually changing to the i810 video driver
12 matches
Mail list logo
