hey guys
just getting back to this index pulse stuff
i have re hacked my whole config and remember what i did now lol
i am disabling m19 spindle orientation now i think and i just want to
rotate the spindle at 5rpm until the spindle index enable pin triggers high
if i can't use the encoder
I got a 10position tool changer and the turret choses the fastest direction
to select new tool.
On Tue, 8 Nov 2022, 11:44 andrew beck, wrote:
> I use classic ladder.
>
> It's pretty easy.
>
> But Andy's component will be better probably
>
> I can send you my classic ladder stuff though if you
I use classic ladder.
It's pretty easy.
But Andy's component will be better probably
I can send you my classic ladder stuff though if you want
On Tue, 8 Nov 2022, 09:05 John Figie, wrote:
> I have made more progress on the Clausing NC. My DC servo dives operate in
> Current Mode and are
I have made more progress on the Clausing NC. My DC servo dives operate in
Current Mode and are controlled by LinuxCNC using a cascaded Position and
Velocity PI controllers. I have a Huanyang VFD 7.5 kw drive running the
spindle but just manually controlled for now. I still need to add a
spindle
Le lun. 7 nov. 2022 à 11:06, Roland Jollivet a
écrit :
>
> Maybe I'm doing it wrong,
Can't say but friends enjoy it daily with their haas and siemens lathe.
and can't find a decent video on F360 late
turning. Have you come across one?
>
On 11/7/22 05:02, Roland Jollivet wrote:
I've tried F360 for code on a small lathe and find it quite painful to get
the toolpath usable. It often wants to part off before completing the turn,
or just doesn't machine optimally.
Possibly because I mostly machine with a grooving tool, so you don't
For easy LinuxCNC integration I think that the sensible choices are
either Glade + Gtk or QT.
I don't know much about QT, but Plasmac made a shift to QT from whatever it
was first written in, so must have something going for it.
For a custom GUI, though, it might make sense to start with Gscreen
Original message From: andy pugh Date:
7/11/22 10:02 pm (GMT+10:00) To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] triggering the mesa
card encoder index pulse On Fri, 4 Nov 2022 at 21:35, gene heskett
wrote:I haven't found it either, probably because
On Fri, 4 Nov 2022 at 21:35, gene heskett wrote:
I haven't found it either, probably because no one else has been able to
> make it work long enough to work on the scripts in align.zip.
>
Why do you imagine that they should?
What the heck _is_ align.zip?
--
atp
"A motorcycle is a bicycle
I've tried F360 for code on a small lathe and find it quite painful to get
the toolpath usable. It often wants to part off before completing the turn,
or just doesn't machine optimally.
Possibly because I mostly machine with a grooving tool, so you don't need a
tool-change.
I have to mess with
10 matches
Mail list logo
