hostmot2 for 7i43
Peter C. Wallace wrote:
On Tue, 25 Nov 2008, Jon Elson wrote:
Same problem with my products. If the cable doesn't say IEEE 1284
Compliant right on the cable jacket, it WON'T WORK!
Others ring out fine, but don't have the twisted pairs internally to
prevent crosstalk
On Fri, 28 Nov 2008, Jon Elson wrote:
Date: Fri, 28 Nov 2008 11:38:15 -0600
From: Jon Elson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Sat, 29 Nov 2008, Olusegun A. wrote:
Date: Sat, 29 Nov 2008 11:46:37 -0800 (PST)
From: Olusegun A. [EMAIL PROTECTED]
To: EMCuser2list emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] I need to connect my Voltmeter to actually read
I'm actually trying to read an analogue signal
On Wed, 3 Dec 2008, Len Shelton wrote:
Date: Wed, 3 Dec 2008 09:29:53 -0600
From: Len Shelton [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Wed, 3 Dec 2008, Kenneth Lerman wrote:
Date: Wed, 03 Dec 2008 12:54:09 -0500
From: Kenneth Lerman [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
On Thu, 4 Dec 2008, Eric H. Johnson wrote:
Date: Thu, 4 Dec 2008 19:49:12 -0500
From: Eric H. Johnson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject:
On Thu, 4 Dec 2008, Stephen Wille Padnos wrote:
Date: Thu, 04 Dec 2008 21:25:58 -0500
From: Stephen Wille Padnos [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
On Thu, 4 Dec 2008, Eric H. Johnson wrote:
Date: Thu, 4 Dec 2008 22:56:04 -0500
From: Eric H. Johnson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re:
On Fri, 5 Dec 2008, Tom wrote:
Date: Fri, 5 Dec 2008 07:12:01 + (UTC)
From: Tom [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] servo chatter at rest is going to drive me nuts...
On Fri, 5 Dec 2008, Eric H. Johnson wrote:
Date: Fri, 5 Dec 2008 14:50:35 -0500
From: Eric H. Johnson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re:
On Fri, 5 Dec 2008, Eric H. Johnson wrote:
Date: Fri, 5 Dec 2008 15:26:58 -0500
From: Eric H. Johnson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re:
On Fri, 5 Dec 2008, Richard Acosta wrote:
Date: Fri, 05 Dec 2008 19:22:21 -0200
From: Richard Acosta [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
] EMC 2.2.7 + 7i43 + Ted's sample,
and same error than using EMC 2.2.6 + 7i43 + Ted's sample What now?
El 05/12/2008 07:35 p.m., Peter C. Wallace escribió:
On Fri, 5 Dec 2008, Richard Acosta wrote:
This may also indicate a inability to communicate with the card.
1. Is the card jumpered
timing/ noise problems in the FPGA and CPLD code
and duplicating your setup would be helpful here
El 06/12/08 13:02, Peter C. Wallace escribió:
On Sat, 6 Dec 2008, Richard Acosta wrote:
Date: Sat, 06 Dec 2008 03:14:13 -0200
From: Richard Acosta [EMAIL PROTECTED]
Reply-To: Enhanced Machine
On Sun, 7 Dec 2008, Len Shelton wrote:
Date: Sun, 7 Dec 2008 10:55:50 -0600
From: Len Shelton [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
the board is a 400K
Thanks again.
Thanks, I doubt if I can get the same motherboard, but I'm sure I can get one
with the same parallel port hardware (VIA VT82C686 southbridge) to try. Will
get back to you sometime this coming week.
El 06/12/08 15:19, Peter C. Wallace escribió:
On Sat, 6
On Tue, 9 Dec 2008, Eric H. Johnson wrote:
Date: Tue, 9 Dec 2008 08:52:10 -0500
From: Eric H. Johnson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re:
On Tue, 9 Dec 2008, Jon Elson wrote:
Date: Tue, 09 Dec 2008 22:28:20 -0600
From: Jon Elson [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Write
EPPtest.exe writes 2 32 bit numbers (n and NOT n) in 2 hostmot2 32 bit
registers and reads them back, reporting and counting the errors. Every 10
test it prints a loop count. This should run continously without errors
El 09/12/2008 12:01 a.m., Peter C. Wallace escribió:
OK I tried rev B 7I43s
Then run this command (assuming your parallel port address is set to 0x378)
Oops I meant:
sc7i43p svst4_4b.bit 378
^^^
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
()_() signature to help him gain world domination.
error with hostmot2 and 7i43 board
Peter C. Wallace wrote:
I wasted 2 days fscking around with those cards (NetMos = MOSChip 9805 based)
I had no trouble getting them into EPP mode, they just dont work right in EPP
mode. I got write to work but they seem to sample the read data
On Wed, 10 Dec 2008, Richard Acosta wrote:
Date: Wed, 10 Dec 2008 21:05:23 -0200
From: Richard Acosta [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
: [Emc-users] Write error with hostmot2 and 7i43 board
Peter C. Wallace wrote:
With the 9805, I can see that the strobe ends in response to my wait signal,
but the data is sampled somewhere around the falling (leading) edge of the
strobe. I thought about an error caused by the port seeing
error with hostmot2 and 7i43 board
Peter C. Wallace wrote:
With the 9805, I can see that the strobe ends in response to my wait signal,
but the data is sampled somewhere around the falling (leading) edge of the
strobe. I thought about an error caused by the port seeing /wait asserted too
How did the DOS testing turn out?
OK... sorry for the delay, but my work is killing me.
Finaly i managed (lack of time not brain) to burn a DOS start cd and put
there the files to make the test.
When sc7i43p svst4_4b.bit 378, everything went fine.
Did sc7i43P report that the 7I43 had a
Ok, besides the chip say 400k, when using the prog. it reported 400k chip.
I'll post again tonight.
Greetings.
OK thats good!
Since the driver wont load (reads wrong FPGA size) my guess is you
have the wrong parallel port address somehow
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This
I am using a pyVCP panel in Axis that has a spindle rpm bar, lifted from
Anders Wallins generously provided ini and hal files on his web page here:
http://www.anderswallin.net/category/cnc/emc/
Thus far, I can display 0 to 4000 rpm in a nice steady green bar, but as
the spindle speed
Ideas?
Thanks,
Matt
Do you mind testing a new bitfile?
I think I've got it. You will still need some overhead so that the hardware
never limits the rate in normal slewing (maybe 5%).
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
()_()
On Tue, 16 Dec 2008, Richard Acosta wrote:
Did sc7i43P report that the 7I43 had a 400K FPGA?
Yes it says a 400k
Well it should say something like:
Pass: 1 Error Count: 0 loop count: 10
Pass: 2 Error Count: 0 loop count: 20
Pass: 3 Error Count: 0 loop count: 30
and i confirm
: [Emc-users] EMC 2.2.7 + 7i43 + Ted's sample,
and same error than using EMC 2.2.6 + 7i43 + Ted's sample What now?
Peter C. Wallace wrote:
On Tue, 16 Dec 2008, Richard Acosta wrote:
Did sc7i43P report that the 7I43 had a 400K FPGA?
Yes it says a 400k
Well it should say something
On Sat, 20 Dec 2008, Sebastian Kuzminsky wrote:
Date: Sat, 20 Dec 2008 09:17:41 -0700
From: Sebastian Kuzminsky s...@highlab.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
On Mon, 29 Dec 2008, Kenneth Lerman wrote:
Date: Mon, 29 Dec 2008 08:47:44 -0500
From: Kenneth Lerman kenneth.ler...@se-ltd.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
: [Emc-users] Mesa 7i43/7i33/5i20 questions
Peter C. Wallace wrote:
ITE 8875 Trying to figure out how to enable
(comes up with all ports disabled)
Sorry to hijack the thread, but is this an Arty-style disable, like
Sasa Vilic reported on emc-users recently
: [Emc-users] Mesa 7i43/7i33/5i20 questions
Peter C. Wallace wrote:
On Wed, 31 Dec 2008, Sebastian Kuzminsky wrote:
Peter C. Wallace wrote:
ITE 8875 Trying to figure out how to enable
(comes up with all ports disabled)
Sorry to hijack the thread
On Thu, 1 Jan 2009, Alex Joni wrote:
Date: Thu, 1 Jan 2009 00:41:44 +0200
From: Alex Joni alex.j...@robcon.ro
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Mesa
On Sun, 4 Jan 2009, Roger wrote:
Date: Sun, 4 Jan 2009 06:17:04 + (UTC)
From: Roger vrsculp...@hotmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] A wish - Closed Loop Steppers
It's
On Sat, 3 Jan 2009, Kirk Wallace wrote:
SNIP__
With only step and direction signals on stepper driver inputs, EMC has
no way of modifying the stepper driver behavior. The driver would need
something like a step bias or correction input, which EMC
: PDP11
Gene Heskett wrote:
On Sunday 04 January 2009, Peter C. Wallace wrote:
On the other hand you can do a lot with a embedded 32 bit processor in a
FPGA (the ZPU for example uses about 20% of a 400K SP3, runs at ~ 100 MHz,
is BSD licensed and has a GCC toolchain)
Which again, sounds
On Tue, 6 Jan 2009, Jon Elson wrote:
Date: Tue, 06 Jan 2009 21:30:20 -0600
From: Jon Elson el...@pico-systems.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Thu, 8 Jan 2009, Arnold Riter CNC wrote:
Date: Thu, 08 Jan 2009 00:07:15 +0100
From: Arnold Riter CNC arnoldriter...@gmail.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] 5i20+sevos and ??stepper??
Hello,
I'm using servos but I'd like to
On Wed, 7 Jan 2009, WF Chan wrote:
Date: Wed, 7 Jan 2009 16:55:18 -0800 (PST)
From: WF Chan howard_chan0...@yahoo.com.hk
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 5i20+sevos and ??stepper??
Now I am using analog signal to control the
On Thu, 8 Jan 2009, WF Chan wrote:
Date: Thu, 8 Jan 2009 03:59:47 -0800 (PST)
From: WF Chan howard_chan0...@yahoo.com.hk
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] [big5] Re?G 5i20+sevos and
-users] [utf-8] Re? 5i20+sevos and ??stepper??
Peter C. Wallace :
On Thu, 8 Jan 2009, WF Chan wrote:
Date: Thu, 8 Jan 2009 03:59:47 -0800 (PST)
From: WF Chan howard_chan0...@yahoo.com.hk
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users
Can you repost the plots of your servo motion, maybe I can guess at whats
wrong with the tuning?
Never mind, I see you did and I missed it
My first guess is that amplifiers velocity loop needs tuning
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into
On Thu, 8 Jan 2009, Peter C. Wallace wrote:
Date: Thu, 8 Jan 2009 10:27:06 -0800 (PST)
From: Peter C. Wallace p...@mesanet.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re
On Fri, 9 Jan 2009, Roger wrote:
Date: Fri, 9 Jan 2009 17:33:27 + (UTC)
From: Roger vrsculp...@hotmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] 5i20/7i43 Pico's PWM Amps
Is anyone
One of our customers would like to use our small LV 3 phase HBridge (7I39) to
drive a motor using EMC. I currently dont have a HostMot2 configuration that
would support this (its normally used with SoftDMC), but the hardware part is
pretty trivial, just a pinout change. (unless I wanted make a
-users] Simple 3 phase drive
Peter C. Wallace wrote:
One of our customers would like to use our small LV 3 phase HBridge (7I39) to
drive a motor using EMC. I currently dont have a HostMot2 configuration that
would support this (its normally used with SoftDMC), but the hardware part is
pretty
On Fri, 16 Jan 2009, Sebastian Kuzminsky wrote:
Date: Fri, 16 Jan 2009 08:58:09 -0600
From: Sebastian Kuzminsky s...@highlab.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
On Sat, 17 Jan 2009, Donnie Timmons wrote:
Date: Sat, 17 Jan 2009 10:30:47 -0500
From: Donnie Timmons dtimm...@etex.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Mesa 5i23 and 7i37 I/O problem
-users] Mesa 5i23 and 7i37 I/O problem
Peter C. Wallace wrote:
I think with the current driver, the watchdog cannot be disabled, probably a
good thing...
Seb and I were discussing that on IRC one evening. I think I convinced
him that it would be nice if the watchdog slept quietly without
On Mon, 19 Jan 2009, Ted Hyde wrote:
Date: Mon, 19 Jan 2009 20:55:56 -0500
From: Ted Hyde laser...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Mesa 5i23 and 7i37 I/O problem
Peter
On Mon, 19 Jan 2009, Donnie Timmons wrote:
Date: Mon, 19 Jan 2009 20:51:06 -0500
From: Donnie Timmons dtimm...@etex.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Mesa 5i23 and 7i37 I/O problem
On Fri, 23 Jan 2009, Richard Acosta wrote:
Date: Fri, 23 Jan 2009 20:54:03 -0200
From: Richard Acosta eyela...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc \Enhanced Machine Controller (EMC)\
emc-users@lists.sourceforge.net
Subject:
On Sat, 24 Jan 2009, Peter blodow wrote:
SNIP---
As I understand, modern driver electronics care for sufficient pulse length
independently of the trigger from the PC so the motors will run smooth
again as they used to. And there came my
On Sat, 24 Jan 2009, Peter blodow wrote:
Date: Sat, 24 Jan 2009 19:45:40 +0100
From: Peter blodow p.blo...@dreki.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Tue, 27 Jan 2009, Richard Acosta wrote:
Date: Tue, 27 Jan 2009 01:15:18 -0200
From: Richard Acosta eyela...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
On Wed, 28 Jan 2009, Richard Acosta wrote:
Date: Wed, 28 Jan 2009 00:28:26 -0200
From: Richard Acosta eyela...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Fri, 30 Jan 2009, Donnie Timmons wrote:
Date: Fri, 30 Jan 2009 23:01:19 -0500
From: Donnie Timmons dtimm...@etex.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Hostmot2 and Homing
What is the
On Sat, 31 Jan 2009, Donnie Timmons wrote:
Date: Sat, 31 Jan 2009 11:16:34 -0500
From: Donnie Timmons dtimm...@etex.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Hostmot2 and Homing
Looks like
Does this make sense?
You saying that it should look like this?
net Xindex-enable axis.0.index-enable m2_5i23.0.gpio.P2.005.in
Probably closer to this:
net Xindex-enable hm2_5i23.0.index-enable.00 = axis.0.index-enable
( the GPIO access is only appropriate if you need HAL to read the
I suggest you read the fine manual. It's really quite good; among many
other things it tells you what you need to know to get homing working.
If you're running emc2 2.2, see section 6.3 of the EMC2 Integrator's
Manual here:
http://www.linuxcnc.org/docs/2.2/EMC2_Integrator_Manual.pdf
On Mon, 2 Feb 2009, Jim Fleig - CNC Services wrote:
Date: Mon, 2 Feb 2009 14:56:40 -0500
From: Jim Fleig - CNC Services j...@cncservices.ws
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
: Re: [Emc-users] PID questions
Peter C. Wallace wrote:
SNIP-
Oh, you may be right.
EMC2 can do this, but I don't know if anyone has yet. The PID component
now outputs error on a pin, and also outputs a saturated signal when
On Sun, 26 Jan 2014, Charles Steinkuehler wrote:
Date: Sun, 26 Jan 2014 11:54:24 -0600
From: Charles Steinkuehler char...@steinkuehler.net
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: EMC2-Users-List Emc-users@lists.sourceforge.net
Subject: [Emc-users]
On Mon, 27 Jan 2014, Stephen Dubovsky wrote:
Date: Mon, 27 Jan 2014 21:09:59 -0500
From: Stephen Dubovsky smdubov...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
On Tue, 28 Jan 2014, Viesturs L?cis wrote:
Date: Tue, 28 Jan 2014 15:58:32 +0200
From: [UTF-8] Viesturs L?cis viesturs.la...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Trouble creating custom firmware for 5i23
2014-01-28 Peter C. Wallace p...@mesanet.com
A couple problems:
1. You need newer source (V3 muxed encoder) I would fetch source from Mesa
So should I just change the version to 03 in vhd file? Or is there
something else I need
On Fri, 7 Feb 2014, tcninj...@gmail.com wrote:
Date: Fri, 7 Feb 2014 09:51:44 -0600
From: tcninj...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: EMC emc-users@lists.sourceforge.net
Subject: [Emc-users] Adding a 4th axis
Hi, I am adding a
On Fri, 7 Feb 2014, Ralph Stirling wrote:
Date: Fri, 7 Feb 2014 16:49:40 +
From: Ralph Stirling ralph.stirl...@wallawalla.edu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
On Sun, 9 Feb 2014, bruno wrote:
Date: Sun, 09 Feb 2014 17:25:03 +0100
From: bruno br...@tinkerbox.org
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Emc-users Digest, Vol 94, Issue 17
This is
On Sun, 9 Feb 2014, bruno wrote:
Date: Sun, 09 Feb 2014 20:43:14 +0100
From: bruno br...@tinkerbox.org
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] mesa 5i25, pncconf working but not linuxcnc
On Sun, 9 Feb 2014, bruno wrote:
Date: Sun, 09 Feb 2014 21:52:52 +0100
From: bruno br...@tinkerbox.org
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] mesa 5i25, pncconf working but not linuxcnc
On Sun, 9 Feb 2014, bruno wrote:
Date: Sun, 09 Feb 2014 22:25:32 +0100
From: bruno br...@tinkerbox.org
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] mesa 5i25,
pncconf working but not
On Sun, 9 Feb 2014, Peter C. Wallace wrote:
Date: Sun, 9 Feb 2014 13:58:07 -0800 (PST)
From: Peter C. Wallace p...@mesanet.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re
On Mon, 10 Feb 2014, Russell Brown wrote:
Date: Mon, 10 Feb 2014 18:18:30 + (GMT)
From: Russell Brown russ...@lls.lls.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Spindle Tacho
There are
On Wed, 12 Feb 2014, Dave Cole wrote:
Date: Wed, 12 Feb 2014 08:42:41 -0500
From: Dave Cole linuxcncro...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
be for a different parallel port chip ad AFAIK Intel
has never fixed this)
The fix is to run a utility thet sets the port into EPP mode. I think Jon
Elson has such a utility
On Wed, Feb 12, 2014 at 7:34 AM, Peter C. Wallace p...@mesanet.com wrote:
On Wed, 12 Feb 2014, Dave Cole wrote:
Date: Wed, 12 Feb
On Thu, 20 Feb 2014, Dave Cole wrote:
Date: Thu, 20 Feb 2014 09:07:17 -0500
From: Dave Cole linuxcncro...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Index (Encoder) Homing
Has anyone
On Sat, 22 Feb 2014, Sven Wesley wrote:
Date: Sat, 22 Feb 2014 10:12:08 +0100
From: Sven Wesley svenne.d...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users]
On Sat, 22 Feb 2014, Mark Tucker wrote:
Date: Sat, 22 Feb 2014 19:20:57 +
From: Mark Tucker m...@rmtucker.f2s.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
On Sat, 22 Feb 2014, Mark Tucker wrote:
Date: Sat, 22 Feb 2014 19:57:26 +
From: Mark Tucker m...@rmtucker.f2s.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Crackling motors using
] Preferred sensors for Mesa cards, NPN or PNP?
2014-02-22 15:52 GMT+01:00 Peter C. Wallace p...@mesanet.com:
for sinking inputs (like 7I70,7I76,7i77,7I84 field inputs) The best is NC
PNP
type. These will fail open (= limit) with short to ground or open wire
faults
Peter Wallace
Mesa
On Tue, 25 Feb 2014, andy pugh wrote:
Date: Tue, 25 Feb 2014 11:47:18 +
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Fun
On Tue, 25 Feb 2014, Jeff wrote:
Date: Tue, 25 Feb 2014 10:37:38 -0800
From: Jeff xylo...@hotmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] beaglebone fpga
I forgot one detail: for EPP interfaced hostmot2 on preconfigured FPGA cards
you want to use the hm2-7i90 branch. Im hoping the features in hm2_7i90
can be merged with the hm2_7i43 driver so there is a common hm2_epp driver
for all EPP interfaced HostMot2 cards.
Peter Wallace
Mesa Electronics
: [Emc-users] beaglebone fpga with linuxcnc
On 2/25/14 12:29 , Peter C. Wallace wrote:
I forgot one detail: for EPP interfaced hostmot2 on preconfigured FPGA cards
you want to use the hm2-7i90 branch. Im hoping the features in hm2_7i90
can be merged with the hm2_7i43 driver so there is a common
On Tue, 25 Feb 2014, Peter C. Wallace wrote:
Date: Tue, 25 Feb 2014 13:14:35 -0800 (PST)
From: Peter C. Wallace p...@mesanet.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re
On Sun, 2 Mar 2014, Gene Heskett wrote:
Date: Sun, 2 Mar 2014 16:10:23 -0500
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] This
On Sun, 2 Mar 2014, Gene Heskett wrote:
If you have a 5V push-pull output, another way would be to connect this
output to Cathode1 and Anode2 and connect Anode1 to 5V through a
resistor and Cathode2 to ground through another resistor.
Thanks Peter, that will solve the single ended signal
,
2 channel. Question re led polarities.
On Sunday 02 March 2014 18:12:42 Peter C. Wallace did opine:
On Sun, 2 Mar 2014, Gene Heskett wrote:
If you have a 5V push-pull output, another way would be to connect
this output to Cathode1 and Anode2 and connect Anode1 to 5V through
a resistor
On Tue, 4 Mar 2014, Marius Liebenberg wrote:
Date: Tue, 04 Mar 2014 21:38:42 +0200
From: Marius Liebenberg mar...@mastercut.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
On Wed, 12 Mar 2014, Ralph Stirling wrote:
Date: Wed, 12 Mar 2014 02:27:01 +
From: Ralph Stirling ralph.stirl...@wallawalla.edu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net emc-users@lists.sourceforge.net
Subject:
On Sat, 15 Mar 2014, Philipp Burch wrote:
Date: Sat, 15 Mar 2014 20:45:18 +0100
From: Philipp Burch p...@hb9etc.ch
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] I$@)^ another C41 gone to hell.
.
Hi Peter!
On 03/15/2014 09:34 PM, Peter C. Wallace wrote:
On Sat, 15 Mar 2014, Philipp Burch wrote:
Date: Sat, 15 Mar 2014 20:45:18 +0100
From: Philipp Burch p...@hb9etc.ch
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
On Thu, 27 Mar 2014, Florian Rist wrote:
Date: Thu, 27 Mar 2014 18:31:12 +0100
From: Florian Rist fr...@fs.tum.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] BLDC
On Wed, 26 Mar 2014, Marius Alksnys wrote:
Date: Wed, 26 Mar 2014 08:10:22 +0200
From: Marius Alksnys marius.alks...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Smart serial using MESA
On Sat, 29 Mar 2014, Florian Rist wrote:
Date: Sat, 29 Mar 2014 23:02:03 +0100
From: Florian Rist fr...@fs.tum.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Sun, 30 Mar 2014, Andy Pugh wrote:
Date: Sun, 30 Mar 2014 13:39:08 +0100
From: Andy Pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Sun, 30 Mar 2014, Florian Rist wrote:
Date: Sun, 30 Mar 2014 18:42:57 +0200
From: Florian Rist fr...@fs.tum.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
301 - 400 of 1866 matches
Mail list logo