On 16 Nov 2017, at 17:45, andy pugh wrote:
> http://bodgesoc.blogspot.de/2017/05/harmonic.html
Nice. Very very nice.
Marcus
--
Check out the vibrant tech community on one of the world's most
engaging tech sites,
On Thursday 16 November 2017 14:53:45 Jeff Johnson wrote:
> I have a small two axis rotary here that I will donate to Gene. You
> can make a 5 axis mill! It may be too big for you but I will dig it
> out and snap some pics next to a tape measure.
>
If I can fit it under the spindle, it sure
On Thursday 16 November 2017 12:45:11 andy pugh wrote:
> On 16 November 2017 at 16:58, Gene Heskett
wrote:
> > Best I've been able
> > to do is draw the bolt down, and injecting air at 100 psi or so into
> > the seat to unlock it enough that a 225 oz motor can turn it.
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Gene's Rotary
>
> I have a small two axis rotary here that I will donate to Gene. You can
make
> a 5 axis mill! It may be too big for you but I will dig it out and snap
some
> pics next to a tape measure.
>
> If
I have a small two axis rotary here that I will donate to Gene. You can make
a 5 axis mill! It may be too big for you but I will dig it out and snap some
pics next to a tape measure.
If Gene does not want it I will let it go to the first offer of $100.00 to
anyone on the list.
Let me know if
On 16 November 2017 at 16:58, Gene Heskett wrote:
> Best I've been able
> to do is draw the bolt down, and injecting air at 100 psi or so into the
> seat to unlock it enough that a 225 oz motor can turn it. That of course
> drives the grease out of the central bearing too.