users@lists.sourceforge.net>
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users] Had to re-flash Mesa 7i77 twice
> >
> > Sorry, latest news: the same happens with other 7i77.
>
> Yeah as I suggested earlier the symptoms seem to suggest loss of
>
Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Had to re-flash Mesa 7i77 twice
We replaced 7i77 with a spare one and the machine is working without a
glitch for two weeks.
The encoder quadrature e
ced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Had to re-flash Mesa 7i77 twice
We replaced 7i77 with a spare one and the machine is working without a
glitch for two weeks.
The encoder quadrature error stil
ourceforge.net
Subject: Re: [Emc-users] Had to re-flash Mesa 7i77 twice
We replaced 7i77 with a spare one and the machine is working without a
glitch for two weeks.
The encoder quadrature error still suggests a
On Tue, 16 May 2017, Marius Alksnys wrote:
Date: Tue, 16 May 2017 21:02:29 +0200
From: Marius Alksnys <mar...@robotise.lt>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Had
We replaced 7i77 with a spare one and the machine is working without a
glitch for two weeks.
04/24/2017 06:17 PM, Peter C. Wallace rašė:
>
> This is most likely to be a PCI issue
>
> (those errors are what you would get if the 5I25 card suddenly disappeared and
> you read all FFs from the
ge.net
> Subject: Re: [Emc-users] Had to re-flash Mesa 7i77 twice
>
>> Are you sure the drive enables work? I would check that if you lose serial
>> comms that the drives get disabled. They should also get disabled if you get
>> a
>> following error, if this does n
> Are you sure the drive enables work? I would check that if you lose serial
> comms that the drives get disabled. They should also get disabled if you get
> a
> following error, if this does not happen, something very basic is wrong.
Drive enables do work. Checked today.
Voltages are correct
On Tue, 25 Apr 2017, Marius Alksnys wrote:
Date: Tue, 25 Apr 2017 21:39:56 +0200
From: Marius Alksnys <mar...@robotise.lt>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Had
Filtering and sampling rate in HAL:
setp [HM2](ENC)muxed-sample-frequency 400
# --- X ---
setp [HM2](ENC)00.filter 1
setp [HM2](ENC)00.quad-error-enable 1
# the same for all axes
We will try to check the voltages.
But how this can happen? Shouldn't the watchdogs disable the outputs
when the
Wallace ra:
On Mon, 24 Apr 2017, Marius Alksnys wrote:
Date: Mon, 24 Apr 2017 13:52:55 +0200
From: Marius Alksnys <mar...@robotise.lt>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: emc-users@lists.sourceforge.net
Subject: [Emc-u
Alksnys <mar...@robotise.lt>
>> Reply-To: "Enhanced Machine Controller (EMC)"
>> <emc-users@lists.sourceforge.net>
>> To: emc-users@lists.sourceforge.net
>> Subject: [Emc-users] Had to re-flash Mesa 7i77 twice
>>
>> A month ago one ma
I had issues in how the 5i25 and7i77 handled bad bits and there were some
changes at about 2.7.4 that should have fixed that. I encountered a
similar error from 2.6 to 2.7.0. Could be mistaken here, but sounds
similar.
On Apr 24, 2017 4:56 AM, "Marius Alksnys" wrote:
> A
users@lists.sourceforge.net>
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users] Had to re-flash Mesa 7i77 twice
> >
> > On Monday 24 April 2017 07:52:55 Marius Alksnys wrote:
> >> A month ago one machine with LinuxCNC and Mesa cards: o
On Mon, 24 Apr 2017, Gene Heskett wrote:
> Date: Mon, 24 Apr 2017 12:07:26 -0400
> From: Gene Heskett <ghesk...@shentel.net>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: emc-users@lists.sourceforge.net
>
On Monday 24 April 2017 07:52:55 Marius Alksnys wrote:
> A month ago one machine with LinuxCNC and Mesa cards: one 5i25 and one
> 7i77 started bringing errors(1) each time program was started. Then I
> re-flashed 7i77 using ./update_7i77 script from mesanet page. It fixed
> the problem.. till
On Monday 24 April 2017 07:52:55 Marius Alksnys wrote:
> A month ago one machine with LinuxCNC and Mesa cards: one 5i25 and one
> 7i77 started bringing errors(1) each time program was started. Then I
> re-flashed 7i77 using ./update_7i77 script from mesanet page. It fixed
> the problem.. till
>
> If the error was not a complaint about the 7I77 firmware version being < 14,
> reflashing the card would not help. I suspect that there is a signal
> integrity issue perhaps in the 5I25 PCI/system connection, as that set of
> errors looks like bad data at that interface.
>
I should note,
On Mon, 24 Apr 2017, Marius Alksnys wrote:
> Date: Mon, 24 Apr 2017 13:52:55 +0200
> From: Marius Alksnys <mar...@robotise.lt>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: emc-users@lists.sourceforge.net
> S
A month ago one machine with LinuxCNC and Mesa cards: one 5i25 and one
7i77 started bringing errors(1) each time program was started. Then I
re-flashed 7i77 using ./update_7i77 script from mesanet page. It fixed
the problem.. till today. Today I got similar errors(2). And again,
reflashing
20 matches
Mail list logo