Guys,
Anyone have information on the above servo systems from siemens and
integrating to Linuxcnc
and reference material etc , at the moment i'm not sure these are analog or
digital
thanks Guys
Dave
--
Comprehensive
On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote:
Anyone have information on the above servo systems from siemens and
integrating to Linuxcnc
JT has them on his Bridgeport.
But I don't _think_ that machine runs LinuxCNC.
--
atp
If you can't fix it, you don't own it.
The 611 only is analog and the 611D are digital .
Do you have the complete code for that servo drive ?
I do believe that with the Siemens product code you should be able to find
the PDF documentation on the net .
I used this servo system in the past years and it's quite similar to other
servo
There were several different versions of the 611 drives.
Most of them were velocity mode drives with analog inputs.
I have some old ones (1992 vintage) on a lathe that runs LinuxCNC.
They could be purchased with encoder or resolver feedback and a host of
other options.
Do you know how old they
The 611D's were also available with analog (+/- 10V) inputs. (many options)
Dave
On 10/16/2014 11:26 AM, alex chiosso wrote:
The 611 only is analog and the 611D are digital .
Do you have the complete code for that servo drive ?
I do believe that with the Siemens product code you should be
Yes Dave you are right .
The D should mean (digital) the technology used on the control boards .
Alex
On Thu, Oct 16, 2014 at 5:36 PM, Dave Cole linuxcncro...@gmail.com wrote:
The 611D's were also available with analog (+/- 10V) inputs. (many
options)
Dave
On 10/16/2014 11:26 AM, alex
David this
http://www.automation.siemens.com/doconweb/pdf/840c_1101_e/611a_iaa.pdf?p=1
is the user manual of Simodrive 611 analog.
As I told you if you can get the Siemens product code you will find all the
docs you need . :-)
Alex
On Thu, Oct 16, 2014 at 5:41 PM, alex chiosso achio...@gmail.com
Thanks Andy , i'll contact J T and ask
On 16 October 2014 16:07, andy pugh bodge...@gmail.com wrote:
On 16 October 2014 16:01, David Armstrong cncbas...@gmail.com wrote:
Anyone have information on the above servo systems from siemens and
integrating to Linuxcnc
JT has them on his
I never did find really good info on the 611 drives. I have one on my BP
308 and if your using a RPC it better be a big one. The other thing I
can recall from memory is both my Siemens drives use the same terminal
number for the analog signal 56 or 58 I can't recall for sure. I think
Robh sent