-Mac-Mach-3-4-axis-Controller/1004816998.html
yes the xhc04 has been added to linuxcnc
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Using_A_XHC-HB04_Wireless_MPG_Pendant
FWIW, I've got one of those and it works for me using the info on the
above page.
--
Billy Huddleston Inner Vision
*William
moment. The same thing in a USB model if
that will work would be sweet. If you do get one maybe you can help me get
mine setup with the same thing.
Pete
On Fri, Feb 7, 2014 at 11:49 AM, Billy Huddleston bi...@ivdc.com wrote:
These look interesting.. I might get one.. Only issue I see
://pubads.g.doubleclick.net/gampad/clk?id=121051231iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp
=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax
wrote:
On Tuesday 25 February 2014 16:58:44 Billy Huddleston did opine:
I've been looking ALL over for this plugin.. Did you find it Richard ?
On 11/14/2013 02:04 PM, kqt4a...@gmail.com wrote:
Where can I find halio plugin?
Richard
I have it on one or both of my machines. ATM IIRC I did
/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development/120023721424
http://twitter.com/ivdc
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
into the spindle, touch
it off, and the loads it in the current carousel slot and update the tool table
with the tool offset.
Can that be done? Can I ask the user questions like, What's the tool number and
the Diameter and Description via some sort of dialog?
Thanks, Billy aka Connor
--
Billy
faulted, 0: normal. Volatile.
5601 toolchanger fault code. Used with the iocontrol-v2 component. Reflects the
value of the toolchanger-reason HAL pin if a fault occured. Volatile.
Is there a list of reasons ?
Thanks, Billy aka Connor
On 04/01/2014 01:51 PM, Billy Huddleston wrote:
OKay, some
if the machine is homed... I'm not talking about the XYZ
homing.. I was referring to Homeing the Carousel to insure that it's in the
correct place.
On 04/01/2014 02:22 PM, Sebastian Kuzminsky wrote:
On 4/1/14 11:51 , Billy Huddleston wrote:
OKay, some discussion going around on the thread about using
Ah. Okay.. So that's something new then...
On 04/01/2014 03:56 PM, andy pugh wrote:
On 1 April 2014 19:15, Billy Huddleston bi...@ivdc.com wrote:
5600 toolchanger fault indicator. Used with the iocontrol-v2 component. 1:
toolchanger faulted, 0: normal. Volatile.
You may not be using
I have it working the other way.. so no big deal.. just need to get my other
questions answered now.
On 04/01/2014 04:11 PM, andy pugh wrote:
On 1 April 2014 21:00, Billy Huddleston bi...@ivdc.com wrote:
Ah. Okay.. So that's something new then...
I don't know if it is new, default
I don't have configs/sim/axis/python_demo/axis-iocontrolv2-demo.ini or even
configs/sim/axis/python_demo and I'm running the latest master...
On 04/01/2014 04:20 PM, Michael Haberler wrote:
Am 01.04.2014 um 22:11 schrieb andy pugh bodge...@gmail.com:
On 1 April 2014 21:00, Billy Huddleston bi
to switch the spindle from velocity command to pid command, and
that's the main thing missing from the docs.
Thanks, Billy aka Connor
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development
The on in the simulator? If so, Yes, I've looked at it.. but, it's not very
helpful.. doesn't even load the rtl component or anything.. if another live
config exists.. I've not
found it..
On 04/04/2014 05:12 PM, Sebastian Kuzminsky wrote:
On 4/4/14 15:07 , Billy Huddleston wrote:
Working
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development
Looking at this gmoccapy.. I don't see a way to manually increase/decrease the
spindle speed using a +/- button.. Was this omitted by accident or am I just
missing it?
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
are this buttons?
Norbert
Am 01.05.2014 19:36, schrieb Billy Huddleston:
Looking at this gmoccapy.. I don't see a way to manually increase/decrease
the spindle speed using a +/- button.. Was this omitted by accident or am I
just missing
that be
a solution?
To your second problem, What version of gmoccapy are you using? actual
is 1.1.4
What is the content of your preferences file?
Norbert
Am 01.05.2014 20:34, schrieb Billy Huddleston:
Yea, I knew I could add custom buttons... One possibility might be to to
use the existing
config.
Did you addf the abs function to the proper place in the proper thread?
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com
seeing your hal config.
Very straight forward connection in and out.
Did you addf the abs function to the proper place in the proper thread?
I get an error if I do addf so I left it out. I can see the function in
the list of halshow though. Does that mean it is not loaded properly?
--
Billy
prepared to go, after that lesson.
Erik
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development
Umm.. I thought the X was brushless and had a resolver on it even though it?
On 10/29/2014 01:02 PM, Pete Matos wrote:
Yeah no actually they are indeed brushed DC servos with encoders. I might
Pete
--
..
I.E so many steps =
this position.
Thanks, Billy
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development
://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development
for the robot. Never got the 2nd.. probably
couldn't get the same
version now.. So will have to go with new versions for that project.. Anyway..
This one has been stripped down.. Would it make a good Camera for this ?
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development
.
Cheers, Gene
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development/120023721424
http://twitter.com/ivdc
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner
On Wednesday, February 13, 2013, Pete Matos petefro...@gmail.com wrote:
Billy,
SWEET That is allpeace
Pete
On Wednesday, February 13, 2013, Billy Huddleston bi...@ivdc.com wrote:
No, it's me.
Just got back from the Dentist.. So, I'm a little sore in the mouth..
I'll
://www.mcmaster.com/#metric-shaft-couplings/=lgqbwq
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development/120023721424
.actually the fellow Lee in England was able to find exactly
the
right size but I suppose one could carefully bore it out to 22Would
much prefer to just buy the right size LOL...
On Wednesday, February 13, 2013, Billy Huddleston bi...@ivdc.com wrote:
Good thought, but, no combinations
/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development/120023721424
http://twitter.com
it
is not cheap. Peace
Pete
On Thursday, February 14, 2013, Billy Huddleston bi...@ivdc.com wrote:
I like oldham couplers the best. If you have a run-away, the only thing
that breaks is the disk. Yes.. they can wear out if you have a bad a major
misalignment.. but, in general
they last
for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development
/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development Corp*
Office: 865.560.2752
Fax: 865.560.2703
http://www.ivdc.com
*Development and Consulting... Simplified.*
http://www.facebook.com/pages/Inner-Vision-Development/120023721424
http://twitter.com/ivdc
13 October 2015 13:56:41 Billy Huddleston wrote:
>
>> I've got to ask.. What exactly is this and what is it for?
>>
>> http://geneslinuxbox.net:6309/gene/GO704-pix/gauge-drive-sliding-coupl
>> ing.jpg
>>
>> ??
> Shade tree engineering, a long and pro
both
> tools.
>
> In either case, my spindle pin brake needs something to hold it in while
> my hand is busy catching the tool or adapter. I made it with a retractor
> spring as its not nice on things to try & start the spindle when its
> locked.
>
> *PIMB pain in my back
to prevent (human)
errors in the future.
Martin
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Billy Huddleston Inner Vision
*William Huddleston
Inner Vision Development*
Offi
Hey,
I'm trying to add a simple button on the right hand side to Shutdown the system. I'm setting the machine up Kisok style. So, how do you add a button that will throw up a confirm
prompt, and then execute a systemctl poweoff command? Any help with setting this up in GladeVCP would be nice.
-office/p/1VK-001E-3WR47
On Mon, Mar 29, 2021 at 11:51 AM Billy Huddleston wrote:
Looking for a small form factor PC to use. Been a while since I've put
together a new system.
Contemplating this: https://www.amazon.com/dp/B085RZDVL5 (Has WiFi for
LAN connection and onboard Ethernet
as possible.
Thanks, Billy
On 3/29/21 6:13 PM, Gene Heskett wrote:
On Monday 29 March 2021 14:30:19 Billy Huddleston wrote:
Looking for a small form factor PC to use. Been a while since I've
put together a new system.
Contemplating this: https://www.amazon.com/dp/B085RZDVL5 (Has WiFi
for LAN
using these
days?
Thanks, Billy
--
Billy Huddleston Inner Vision
*
*
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Setting up a LinuxCNC box, more or less in a Kiosk mode. I have it so when it boots up, it loads LinuxCNC (Axis) in FULLSCREEN, not Maximized. I want to add 2 buttons on the
right hand side that lets you reboot & shutdown the system. I've been told it's not a good idea to simply reboot without
No. This is stock install running Axis. So I'm needing help with that too.
On 4/15/21 12:43 PM, andy pugh wrote:
On Thu, 15 Apr 2021 at 17:30, Billy Huddleston wrote:
I've been told it's not a good idea to simply reboot without exiting LInuxCNC
because it needs to write stuff to files
Hey Guys, working on getting a plasma setup. I have two THCAD-10's. I've read
the plasma-cnc-primer.html document. I had questions on how to wire up the
Other THCAD for touchoff.
Cutter: Hypertherm Powermax 100
Torch: Autocut S 105 (Made by Trafimet?)
I think the problem is the torch. It
Hey everyone,
I'm still working on getting this AvidCNC setup for use at out maker space.
Let me give you some info on it. It's a 5' x 10' machine, with the first 16" reserved for Rotary Axis/Vertical Spoil Board/ Tooling plate. Then the next 8 feet would be typical
use router space, the
I'm unfamiliar with G10 commands or how they would apply to this. I read over
the documentation on them and don't quiet understand how they would work for
this.
On 4/20/24 6:59 AM, andy pugh wrote:
On Sat, 20 Apr 2024 at 02:12, Billy Huddleston via Emc-users
wrote:
> However, When
Sorry, That was always hidden behind the UI. I never issued a G10 command. I didn't realize that was the GCode behind it. The Probe Basic makes extensive use of G10 in the
probing routine.
On 4/22/24 5:54 AM, andy pugh wrote:
On Sun, 21 Apr 2024 at 02:33, Billy Huddleston via Emc-users
Hey Everyone,
I'm just checking to get recommendations on tool setter placement and workflow.
This is for a 5'x10' Avid CNC router. ATC with the Tool Rack in the back.
Operator station front right, and this is for hobby use only (For a Maker
Space, not production)
My original plan was to
49 matches
Mail list logo