To: ev@lists.evdl.org<mailto:ev@lists.evdl.org>
Sent: Saturday, September 13, 2014 6:03 PM
Subject: [EVDL] Pack voltage
Would anyone have ant thoughts as to why my "pack" voltage starting out
with 160.8 volts on the dial would drop to 140 volts on a mild "pull"?
It has ju
On 13 Sep 2014 at 17:03, Sam Shepherd via EV wrote:
> I did [check] the cell voltage of each cell with no real diferences.
If you didn't check the cell voltages under load, you need to do that.
One way is to run a small gauge voltage-test pair to each cell, fused, with
the other ends terminat
Which BMS do you have? What sorts of alarms has it given?
If there have been no alarms, then it is most likely a loose
connection. Try re-torqueing all of your battery connections.
You can also measure all of the cells after a long drive - they should
all be very close to each other in term
I have BMS and they are Lithijm and the are less than a year old.
On Sat, Sep 13, 2014 at 5:17 PM, Willie2 via EV wrote:
> On 09/13/2014 07:03 PM, Sam Shepherd via EV wrote:
>
>> Would anyone have ant thoughts as to why my "pack" voltage starting out
>> with 160.8 volts on the dial would drop to
On 09/13/2014 07:03 PM, Sam Shepherd via EV wrote:
Would anyone have ant thoughts as to why my "pack" voltage starting out
with 160.8 volts on the dial would drop to 140 volts on a mild "pull"?
It has just started doing this.
I didck. the cell voltage of each cell with no real diferences.
If lith
Would anyone have ant thoughts as to why my "pack" voltage starting out
with 160.8 volts on the dial would drop to 140 volts on a mild "pull"?
It has just started doing this.
I didck. the cell voltage of each cell with no real diferences.
-- next part --
An HTML attachment w