.
--Alex Alborzfard
_
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Web Interface:
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchangetext_mode=lang=english
To unsubscribe: mailto:[EMAIL
The account associated with Event Service is the same as the one used to
install Exchange,
however Event service won't still start.
-Original Message-
From: M [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 13, 2004 10:56 AM
To: Exchange Discussions
Subject: RE: Exchange Event service
Since this most likely means stopping EX, running Optimizer and re-applying
the SP,
it'll have to wait for an off-peak time.
In the mean time, can you point me to those articles?
Thanks
-Original Message-
From: M [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 13, 2004 10:59 AM
To:
Does EX2K caches the DNS data? If so, what is the default settings and
where/how it can be changed?
Also can EX2K be configured to use an IP address, instead of the host name
in DNS?
If so, where/how it can be configured?
Thanks
--Alex Alborzfard
-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]
Sent: 06 November 2003 17:26
To: Exchange Discussions
Subject: Sporadic Email Problem
From time to time users cannot receive emails from outside. The
messages bounce with the SMTP 550 relaying error message. The server
is up and all
It looks like you have 6 different MX records. Verify that each one can
receive email for that domain. You may have one that's messed up and is
rejecting.
Remember, just because one has the lowest cost, doesn't mean its always
going to receive the mail.
-Original Message-
From: Alex
From time to time users cannot receive emails from outside.
The messages bounce with the SMTP 550 relaying error message.
The server is up and all the services are running fine.
Below is a copy of one message sent from Yahoo:
+++
software and other misc. services,
there is not much Available Memory: between 4-18MB. This has created
problems in sending and receiving, as the server sometimes doesn't respond
in time and just times out.
Thanks
--Alex Alborzfard
_
List
for me.
--Alex Alborzfard
-Original Message-
From: Mitchell Mike [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 24, 2003 12:18 PM
To: Exchange Discussions
Subject: Agent Tabs In Outlook
Greetings,
I am using the Auto Accept utility for Outlook 98 Exchange 5.5 SP4. I have
several
, SP6
Thanks
--Alex Alborzfard
-Original Message-
From: Eric Holtzclaw [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 24, 2003 11:37 AM
To: Exchange Discussions
Subject: Public Folder Problem
With Exchange 2000 Move server FAQ
I now have 2 E2K servers side by side, same
this, I had tried (unsuccessfully) a server-side Auto-Reply
script (from CDOlive), but that didn't work either.
I have EX5.5, on NT 4 SP6.
Thanks
--Alex Alborzfard
-Original Message-
From: Roger Seielstad [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 23, 2003 10:16 AM
To: Exchange
. Is there more than one rule
setup?
From: Alex Alborzfard [EMAIL PROTECTED]
Reply-To: Exchange Discussions [EMAIL PROTECTED]
To: Exchange Discussions [EMAIL PROTECTED]
Subject: Problem with server reply in Rules Wizard
Date: Tue, 23 Sep 2003 10:23:53 -0400
I set up a rule to have server reply
to the internet enabled on your server?
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 23, 2003 7:24 AM
To: Exchange Discussions
Subject: Problem with server reply in Rules Wizard
I set up a rule to have server reply using a specific message
Got the reply just now. Apparently there was some delay with Yahoo.
Thanks for your help!
Btw the server-side script is still not working.
--Alex Alborzfard
-Original Message-
From: Arlo Clizer [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 23, 2003 10:37 AM
To: Exchange Discussions
EX 5.5, SP4 - NT4 SP6
Out of office message works for one user but not for at another user. Both
users are on the same server, but in different recipient containsers. Any
ideas why?
Thanks
--Alex Alborzfard
Exchange Admin
_
List
instead?
What are other OL(2000) to EX(5.5/2K) over VPN connectivity issues?
Thanks
--Alex Alborzfard
Exchange Admin
_
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Web Interface:
http://intm
. There is a problem within the page you are trying
to reach
and it cannot be displayed
The strange thing is that it doesn't happen when you load a new browser
window,
but if you log out and log back in, you'll get the error message.
Thanks
--Alex Alborzfard
Exchange Admin
that it says it's a faster protocol than SMTP
and it's used to centralize mail queue for cluster of hosts. Apparently it
runs on Unix.
Does anyone know whether the protocol is legitimate and/or could be used for
spamming or spreading virus?
Thanks
--Alex Alborzfard
One of our depts is looking to send mail to an Exchange 5.5 server via
Secure SMTP and I'm wondering if 5.5 supports it INCOMING. I know you can
force Exchange to send outgoing, but do not know if Exchange - by default -
will accept mail at port 465.
Any Ideas?
-Original Message-
under a reply to another topic.
-Original Message-
From: Alex Alborzfard
Sent: Wednesday, June 18, 2003 10:38 AM
To: 'Exchange Discussions'
Subject: RE: Brick level backups - legal disclaimers
One of our depts is looking to send mail to an Exchange 5.5 server via
Secure SMTP and I'm
AM : QUIT
+
Also we have been having similar problems with other european recipients.
Any ideas what could be causing this?
Thanks
--Alex Alborzfard
Network Errand Boy
MCSE, CCNA, CCDA, CCISP
. But that was not supposed to affect
us, because we're still hanging
off the old line (and router). Also our mail server's public IP address
never changed and we are able to send/receive email as before.
--Alex Alborzfard
Network Errand Boy
MCSE, CCNA, CCDA, CCISP
-Original Message-
From: Ed
++
Is there anything I can do on my end to get rid of the reverse DNS problem?
Thanks
--Alex Alborzfard
Network Errand Boy
MCSE, CCNA, CCDA, CCISP
-Original Message-
From: Ed Crowley [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 05, 2003 2:10 PM
to see if the problem was resolved.
--Alex Alborzfard
Network Errand Boy
MCSE, CCNA, CCDA, CCISP
-Original Message-
From: Ed Crowley [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 05, 2003 2:10 PM
To: Exchange Discussions
Subject: RE: Mysterious bounced message
I wandered off
Greg,
I'm not sure if you got the email I sent you yesterday, but I want to
clarify one more thing:
One EX55 box will be moved physically to another location, where its
contents will be moved using EXMERGE.
Therefore there'll be no chance to get the message flowing between the 2
Exchange boxes.
Greg,
Thanks for your thorough response!
Here are some clarifications and comments on your response.
As far as I can understand it, this is how they want to do this:
1. Install a new server w/ NT 4 as a BDC.
2. Install a 2nd server w/ NT 4 as a BDC. Keep it as a backup.
3. Replicate new BDC
;ls.swynk.com] On Behalf Of Alex Alborzfard
Sent: Thursday, October 31, 2002 12:45 PM
To: Exchange Discussions
Subject: RE: Interesting EX2K migration solution
How come no one has bothered to post a response to my question? Is that too
stupid or trivial a question/topic to warrant a response
consolidating
Exchange but not domains. I'm guessing politics is playing into it.
Roger
--
Roger D. Seielstad - MCSE
Sr. Systems Administrator
Inovis - Formerly Harbinger and Extricity
Atlanta, GA
-Original Message-
From: Alex Alborzfard
D. Seielstad - MCSE
Sr. Systems Administrator
Inovis - Formerly Harbinger and Extricity
Atlanta, GA
-Original Message-
From: Alex Alborzfard [mailto:Alex.Alborzfard;VISIONICS.com]
Sent: Thursday, October 31, 2002 12:15 PM
To: Exchange Discussions
Subject: Interesting EX2K migration
kcCC+I
Tech Consultant
hp Services
Protecting the world from PSTs and Bricked Backups!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:bounce-exchange-94760;ls.swynk.com] On Behalf Of Alex Alborzfard
Sent: Thursday, October 31, 2002 9:15 AM
To: Exchange Discussions
Subject: Interesting
Our company runs EX 5.5 in 2 separate Organizations NT domains, as well as
2 separate locations.
To save in migration cost to EX2K, they've decided to migrate to EX2K/W2K/AD
in only 1 location and move all the mailboxes from other location there.
The other location will retain its NT domain
How come no one has bothered to post a response to my question?
Is that too stupid or trivial a question/topic to warrant a response?!!
-Original Message-
From: Alex Alborzfard [mailto:Alex.Alborzfard;VISIONICS.com]
Sent: Thursday, October 31, 2002 12:15 PM
To: Exchange Discussions
the IMC without a
problem.
Exchange can connect to port 25 on all of ISP's mail server.
Would message tracking help figuring out the problem? If so where's the
default directory/files
to look at?
Thanks
--Alex Alborzfard
_
List posting
I looked into tracking.log folder and the log files in there,
but I can't find any useful information in there. Any ideas?
Thanks
--Alex Alborzfard
_
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives
!
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 16, 2002 4:30 PM
To: Exchange Discussions
Subject: OOA questions
EX 55/SP4, NT4/SP6
1- Is there a way/tool to find out which mailboxes are setup with Out of
Office message
at any given time?
2
I had couple of questions regarding this software:
1- Are you really happy with it? No major problems or anything?
2- Does it work with both Palm or Windows CE(PocketPC) PDAs or just one?
I tried emailing the address posted on the website, but it bounced back!
Thanks
--Alex
-Original
,
but that's not
the full path.
Thanks
--Alex Alborzfard, MCSE
_
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe: mailto:[EMAIL
This works but I'd rather type the UNC path.
Sorry I should've been more specific!
--Alex Alborzfard, MCSE
-Original Message-
From: Aaron Brasslett [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 09, 2002 1:14 PM
To: Exchange Discussions
Subject: RE: Shortcut for Public Folders
Yes that's what I was looking for.
Thanks
Alex Alborzfard, MCSE
-Original Message-
From: Aaron Brasslett [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 09, 2002 1:21 PM
To: Exchange Discussions
Subject: RE: Shortcut for Public Folders
After re-reading you post, you may be looking
I've had the same problem 3-4 times in the last week.
When I request unhold, I don't get a response, but I start getting the
messages.
--Alex
-Original Message-
From: Martin Tuip [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 03, 2002 2:45 PM
To: Exchange Discussions
Subject: Re:
to chip in.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 23, 2002 3:35 PM
To: Exchange Discussions
Subject: RE: Bulk deletion of Mailboxes/CRs, etc.
Thanks Tony you were great help!!!
-Original Message-
From: EXTERN Hlabse Tony (Tek
EX 5.5, SP4 on NT4 SP6
I need to move OWA to another server than EX box.
I couldn't find anything on Technet or Online help. What changes to IIS/EX
need to be made
to make this happen?
Can IIS 5 on a WIN2K server serve this up?
Thanks
Alex Alborzfard, MCSE
it on another box...Its really that simple.
Yes, you can run OWA on W2K server.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 26, 2002 8:46 AM
To: Exchange Discussions
Subject: OWA Setup on a different machine on EX5.5
EX 5.5, SP4 on NT4 SP6
I need
reason to make it do so.
As for the new OWA box, uninstall the SMTP engine. Of the big 3 component
(WWW, SMTP, FTP) All you need is the WWW service.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 26, 2002 9:20 AM
To: Exchange Discussions
Subject
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q248718
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 26, 2002 9:40 AM
To: Exchange Discussions
Subject: RE: OWA Setup on a different machine on EX5.5
I disabled the SMTP on the WIN2K box
on a different machine on EX5.5
Dude. Did you install the Exchange SP on the OWA box yet? SP3 or SP4.
You need to.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 26, 2002 10:24 AM
To: Exchange Discussions
Subject: RE: OWA Setup on a different machine on EX5.5
Is there a utility out there to create mailboxes, custom recipients, DLs
etc.
on command line?
Thanks
Alex Alborzfard
Network Errand Boy
_
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives
I did rebuild the profile, but the problem still persists.
I can't remove the Internet Email Service, because the user is on the road a
lot.
As for the upgrade to OL2002 we don't have the license or the $$ for the
upgrade.
Any other ideas?
-Alex Alborzfard
Network Errand Boy
-Original
What is the MS article number?
Thanks
ALEX
Network Errand Boy
-Original Message-
From: James Lavoie [mailto:[EMAIL PROTECTED]]
Sent: Monday, March 04, 2002 10:37 AM
To: Exchange Discussions
Subject: testing relay
I followed the Microsoft article on preventing mail relay on exchange
Where is this article exactly, cause I couldn't find it
on Technet site?
--ALEX ALBORZFARD
Network Errand Boy
-Original Message-
From: Hunter, Lori [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 13, 2002 3:27 PM
To: Exchange Discussions
Subject: RE: Public Folders Mailing Lists
I know this has been done to death, but are there security
or other issues (such as creating loops) with turning it on IMS?
I couldn't find anything on the archivea list, or maybe I just didn't know
where to look.
Thanks
--Alex Alborzfard
Network Errand Boy
Is it possible to move mailboxes from one Recipient Container
to another or they have to be deleted and then re-created
in the other container?
Thanks
Alex Alborzfard
MCSE
_
List posting FAQ: http://www.swinc.com
Yes. Then I have to delete create new ones?
Alex Alborzfard
MCSE
-Original Message-
From: Tristan Gayford [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 02, 2002 10:27 AM
To: Exchange Discussions
Subject: RE: Moving Mailboxes
What version are you using - if it is 5.5
manage!
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 02, 2002 9:20 AM
To: Exchange Discussions
Subject: RE: Moving Mailboxes
Yes. Then I have to delete create new ones?
Alex Alborzfard
MCSE
-Original Message-
From
...and what was that...turning it off on the IMS?!
Is it true that they are not secure and reveal everything
about the Exchange server?!!
Alex A.
Network Errand Boy
-Original Message-
From: Martin Tuip [mailto:[EMAIL PROTECTED]]
Sent: Saturday, December 22, 2001 12:40 PM
To: Exchange
Is it possible to conduct an anonymous survey via
Exchange/Outlook?
On a related note how does voting work?
Thanks
Alex Alborzfard
MCSE
_
List posting FAQ: http://www.swinc.com/resource/exch_faq.htm
Archives
/Voting
Have you checked Technet out? Read Outlook Voting and Vote Processing
(Q166446) for a quick overview.
LEJ
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 14, 2001 1:29 PM
To: Exchange Discussions
Subject: Survey/Voting
Is it possible
/Voting
Typically voting works like this:
There can be a number of choices. At least 2. Then people choose which one
they like best. That is the vote. Then the votes are counted, and the one
with the most votes wins.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent
on the road.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 14, 2001 10:42 AM
To: Exchange Discussions
Subject: RE: Survey/Voting
Yes it says it works with OL97. Do you know if it works with OL2000 as well?
Thanks
ALEX
P.S. - Martin, don't quit your
Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 14, 2001 1:42 PM
To: Exchange Discussions
Subject: RE: Survey/Voting
Yes it says it works with OL97. Do you know if it works with OL2000 as well?
Thanks
ALEX
P.S. - Martin, don't quit your day job
Scenario
---
Company X has merged with company Y.
Company X has 2 locations:
East Coast - 1 EX 5.5 SP4 on NT 4, responsible for
X.com domain's mail
UK - NONE (Using East coast mail
server via Internet)
Company Y has 2
at least
that much email.(Which you stated later)
Andy
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, October 26, 2001 4:32 PM
To: Exchange Discussions
Subject: RE: Weird message from System Administrator
I don't have time for this kinda BS.
Except
EX5.5 SP4 - NT4
Whenever anyone is sending email to user X, they get the following message
back
from System Administrator:
Your message did not reach some or all of the intended recipients.
Subject: Test#2
Sent: 10/26/2001 1:04 PM
The following recipient(s) could not be
: Weird message from System Administrator
Wow, that Joe Blow and User X sure do get around. I must be the only
Exchange admin who has never worked with them.
What's happening on that client? Delivery to store or PST? Limits? Is he
over?
-Original Message-
From: Alex Alborzfard [mailto
if it's supposed to be
delivered to PST and it's sitting on the server? And why oh why is it
DELIVERED to a PST when you have a server?
Once again, PSTs have their uses but delivery point is not one of them.
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday
: Friday, October 26, 2001 2:31 PM
To: Exchange Discussions
Subject: RE: Weird message from System Administrator
Again JackA$$!! If you have an Exchange server, WTF are you popping mail to
a PST file for?
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday
nothing useful to
dignify.
Configure your sh!t properly and then come talk some trash. Til then...
PEACE OUT!
-Original Message-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, October 26, 2001 11:34 AM
To: Exchange Discussions
Subject: RE: Weird message from System
-
From: Alex Alborzfard [mailto:[EMAIL PROTECTED]]
Sent: Friday, October 26, 2001 12:32 PM
To: Exchange Discussions
Subject: RE: Weird message from System Administrator
1- I was trying to clarify my situation better for her.
Contrary to what you thought, I wasn't trying
I'm a newbie as well. I have the following problem:
I'm trying to set up the following:
Setup the public folders so that users can access it anonymously through
their browser.
I've seen this work on one of our vendor's website like this:
http://servername/exchange/root.asp?acs=anon
But when I
69 matches
Mail list logo