Downloading the list of all RPM's and using kpackage to upgrade individual
packages went bad when my box ran out of mem half way through an upgrade
and killed X and kpackage. To try to recover I did a manual rpm --nodeps
-F * of the RPM's and it only got worse so now that computer has no
I've RTFM, and then read it again, I'm missing something OBVIOUS.
I'm trying to build a simple script which executes one line, but it
needs root permission. So, I built the one line script, did a chown
root.system script ; chmod 6755 script.
However it acts like the script is running still as
Running LM 7.2 I have recently hit a
stumbling block printing out of GIMP.
I have had sucess with Tills rpms before
and after acquiring and setting up a nice
Epson 900 it appeared to work fine with
default settings, printing fine.
However adjusting settings via cups and/or Gimp
to utilize the
Simon Cousins wrote:
First from the cd, then from downloads, teh 7.2 cdrom.img will not find
my Bus Logic SCSI cards, therefore not my CDROM either.
7.1 had no problems.
Anyone else had this trouble or any clues as to how to ger around it?
I ran a 7.2 install off Macmillan CDs
One of my serial ports is on /dev/cua3. On /dev/cua1, my modem
works happily. I would like to use my pilot on the other port, but
jpilot says:
Pi_bind permission denied
Hi,
check permissions on /dev/ttyS* (or /dev/cu*) - you rw access as user
I have found some info on this in the
Hello,
I have a client, that a vendor is trying to persuade to run
Windows 2000 Terminal Server. Right now they are running DOS
apps under Win 3.11 or Win95. The vendor is saying that the
Terminal Server is the way to go, as all the programs are all
run on the server.
My questions:
1. Is
I have installed LM 7.2 with high security setting.
It installed kernel-secure.
I want to recompile this kernel to add some features.
How do I download the sources for this kernel?
Are the sources the same as for the regular kernel? or
there is different source?
In the info of the kernel-secure
On Thu, Dec 14, 2000 at 07:31:53AM -0800, Anton Graham wrote:
Mandrake doesn't, by default, use sndconfig for this reason. sndconfig
writes to /etc/conf.modules, while Mandrake, in compliance with the PTB has
deprecated the use of that file. copy the information sndconfig writes to
tengo la version de mandrake 7.2 y me parece muy
buena. sin embargo, tengo problemas cuando estoy realizando algun archivo de
texto ya que el cursor parece tener vida propia, es decir, al seleccionar con
las teclas o mouse, continua seleccionando sin detenerse. tengo el mismo
problema con
HI
1) With wine you will run some Win9x
applications. You will have to try them.
but you will only replace an MS box by a Linux box.
The gain is pretty nill. Even if you run a Xserver and run some linux WS it will
be not the same that TS.
2) Yes there is compatibiliy problem with TS (NT4
Hi
You run the install.bin program and after a while
it stops saying that the file is not binary and it cannot expand the VM
archive.( it is the same thing for the Docs and samples)I know that it is
not the file, because I can install it under Suse 6.4 without any problem. I am
sure that
Andre LABBE a écrit :
Hi
You run the install.bin program and after a while it stops saying that
the file is not binary and it cannot expand the VM archive.( it is the
same thing for the Docs and samples) I know that it is not the file,
because I can install it under Suse 6.4 without any
That's Mandrake's fault - Red Hat fixed the `conf.modules' problem [by
renaming it appropriately] in Red Hat version 7, and sndconfig that ships
with 7 writes t the correct file. Mandrake should either not include
sndconfig if it worn't work properly with their setup or have shipped the
Red
Hola, ese problema se presenta debido a la tarjeta de video y el monitor, a
mi me pasa lo mismo. el problema es que la rata de refresco está demasiado
baja, y eso puede ser, a) porqué esté mal y se le pueda colocar una más alta,
o b) la tarjeta de video no da una mayor. Podria probar poniendo
compre una impresora xerox docuprint xj8c pero esta
no imprime en colores bajo el sistema operativo linux mandrake 7.2. quiero saber
si ustedes tienen los controladores para este sistema operativo. o si es
posible, saber donde puedo encontrarlos.
Why does the BitchX update just released require libmysqlclient.so.9:
[root@regulus 7.2]# rpm -Fvh BitchX-1.0-0.c17.1.1mdk.i586.rpm
error: failed dependencies
libmysqlclient.so.9 is needed by BitchX-1.0-0.c17.1.1mdk
S
Keep in touch with http://mandrakeforum.com:
Someone once posted a simple script for changing upper case letters to lower
case, I believe, in this list. I didn't keep the message but I now have need
of this script. Could someone please post such a script?
--
Against stupidity, the gods themselves contend in vain
---
praedor
Keep
Why does the BitchX update just released require libmysqlclient.so.9:
[root@regulus 7.2]# rpm -Fvh BitchX-1.0-0.c17.1.1mdk.i586.rpm
error: failed dependencies
libmysqlclient.so.9 is needed by BitchX-1.0-0.c17.1.1mdk
S
Keep in touch with http://mandrakeforum.com:
Subscribe
man sleep
Bill
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Andy Judge
Sent: Thursday, December 14, 2000 5:22 PM
To: [EMAIL PROTECTED]
Subject: [expert] shell script function to pause / wait
What is the function to have the script pause for n
Has any one had luck getting sound to work on Corporate Server/
Sparc? Using Ultra Sparc 5, sndconfig runs, use xmms and garbage.
Using mixer tells me it can not write. Why in the world I want the
sound to work is just me, guess I like tunes when I work :)
-Scott
Keep in touch with
I want configure my sendmail for make virtual domain. The linuxconf make
very good this, but i want make this by hand ( using the vpop3, the
directory created for linuxconf ,etc)
in the sendmail.cf linuxconf adds CV my.virtua.ldomain , is this line
sufficient?
Maximo Monsalvo
Guspamar
What does
# rpm --rebuilddb
do?
Civileme
I should have mentioned that I have already tried this.
[root@lyra tom]# updatedb
[root@lura tom]# rpm --rebuilddb
Further checks on the rpm database reveal that some of the packages
that I recently updated using MandrakeUpdate seem to be duplicated
in
uncomment the lines.. also look for a Loadmodule phpXXX
I'm not sure which version of apache/php mdk ships with so couldn't tell u
what the number will be after the loadmodule.. but probably LoadModule
but for me it's
LoadModule php4_modulelibexec/libphp4.so
this needs to be
I just got my sound working (thanks to who ever posted their modules.conf file for me)
Now the problem I have is only root has clean sound. If I logout and in as user the
sound is terribly distorted. I have the same options checked in KDE 2.0 on this
clean install of MDK 7.2. The computer is a
Beta1 is on nebsllc.com in pub/KDE_UPDATE
-Chris
On Thursday 14 December 2000 21:17, Al Baker wrote:
I'm waiting for KDE 2.1
The .0's are always unstable.
--- RedRat [EMAIL PROTECTED] wrote:
Hello List!
After having some trouble with updateing KDE2 to
KDE2.0.1 I uninstalled all
Thanks to whoever made the new packages on mandragon from cooker
announced recently. I am happily using Mozilla i586 (was using the i386
version from linuxberg previously).
Since it was too much trouble to compile Nuatilus, Evolution etc, maybe
you could compile basla 1.0
Thanks
Buchan
Keep
Do yo need a script for this? it's one line code.
tr "[a-z]" "[A-Z]"
And use pipe to get input and output!
Original Message Follows
From: "Praedor Tempus" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [expert] script to change upper to lower case
Date:
Submitted 15-Dec-00 by Praedor Tempus:
Someone once posted a simple script for changing upper case letters to lower
case, I believe, in this list. I didn't keep the message but I now have need
of this script. Could someone please post such a script?
I use the following function to
i've problem to install my 20GB HDD to my Promise UDMA66 ide-slot..(but it's
work so fine with 6,4GB HDD), is somebody there can give solutions??? :( ..
btw i use mandrake 7.2
Regards
chris rubino
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Este es el lugar para buscar datos sobre impresoras y sus drivers:
http://www.linuxprinting.org
Este lugar te puede ayudar:
http://www.mandrakeuser.org/hardware/#4th
Por otra parte y según un mail previo, puede ser que tu problema sea debido
a que imprimes en staroffice, fijate si con otros
Eric,
I recall that running scripts with suid set is disallowed. A reference is
given in the O'Reilly "Learning the Bash Shell" book, 2nd Ed., page 255.
"Modern system administration wisdom says that creating suid shell scripts is
a very, very bad idea. In fact, some versions of UNIX
On Fri Dec 15, 2000 at 08:32:09PM -0500, Support wrote:
Why does the BitchX update just released require libmysqlclient.so.9:
[root@regulus 7.2]# rpm -Fvh BitchX-1.0-0.c17.1.1mdk.i586.rpm
error: failed dependencies
libmysqlclient.so.9 is needed by BitchX-1.0-0.c17.1.1mdk
Does anyone know how to use rsynch over ssh so that I can do it from a
cron job? I use this script:
#!/usr/bin/expect -f
log_user 0
spawn /usr/bin/rsync -avP --delete --stats -l -t -e ssh \
user@somehost:/path/to/files /path/to/local
expect "password: "
send "secret\n"
log_user 1
interact
33 matches
Mail list logo
