On Sunday 27 January 2002 02:25, you wrote:
Can't seem to get my Xircom RBEM56G-100BTX 10/100/56k pcmcia card to work..
The pcmcia howto (http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO)
says that I should use the tulip driver.
When I do so in hardrake autoprob I get a failure and
On Sunday 27 January 2002 10:58, you wrote:
Do a 'cardctl info' to see if it gets recognized as it should.
Ummh sorry, that should've been 'cardctl ident'
--
Harm Bathoorn.
Sudden Death!!
Microsoft Office demands it's serial-code AGAIN!!
Want to buy your Pack or Services from
What are you looking for in a case?
I have been assembling computers for 10 years now, and have
used a lot of different kinds. Currently, for a normal mid-tower
case, of good quality and reasonable in price, I am using In-Win's
S700 case with the 300w power supply (to support the Athlon).
Hi all
I urgently need a copy of kernel-2.4.16- mdk.i586.rpm,
all I can find on cooker is 2.4.17-10mdk, I lost the rpm I had when I
had to rebiuld after trying to get abiword working.
can some one point me to a site that has the rpm on, I could if the
worst happens always down load the tarball
Lian-Li cases are really awesome. They're made of aluminum, they're
light, no sharp edges, and very high quality.
Bruce Endries wrote:
What are you looking for in a case?
I have been assembling computers for 10 years now, and have
used a lot of different kinds. Currently, for a normal
I am running Mandrake 8.1 and am attempting to install a
Xircom combo Modem/Network Card: Xircom RBEM56G-100BTX
[According to http://www.xircom.com/cda/page/0,1298,0-0-1_20-476,00.html
this uses the Linux driver XIRC2PS_CS (see also
http://pcmcia-cs.sourceforge.net/ ]
With the
The printer is an HP DeskJet 855c slung off the lpd print server built
into my SMC Barricade 7004ABR. I have to use the 600c driver from HP
while it's on the barricade, or it doesn't work. At some point, I
remeber turning on the banner page, but I can't for the life of me
remember where, or
Anyone know where I can find a case that holds 2 motherboards..
thanks
Harold
[EMAIL PROTECTED]
On Sunday 27 January 2002 09:47 am, you wrote:
Lian-Li cases are really awesome. They're made of aluminum, they're
light, no sharp edges, and very high quality.
Bruce Endries wrote:
What are you
Using Mdk 8.1 on an AthlonXP 1600, 1.5 GB RAM. I am using this as an
LTSP server, so I need a recent kernel to try to avoid nfs problems,
etc.
I built kernel-2.4.17.10mdk from .src.rpm, and got enough other stuff
upgraded that the enterprise kernel works. However, I get the same
error message
Theo Brinkman wrote:
The printer is an HP DeskJet 855c slung off the lpd print server built
into my SMC Barricade 7004ABR. I have to use the 600c driver from HP
while it's on the barricade, or it doesn't work. At some point, I
remeber turning on the banner page, but I can't for the life
On Fri, 25 Jan 2002 07:26:23 -0700
Lee Roberts [EMAIL PROTECTED] studiouisly spake these words to ponder:
I made the statement that none of my UDP ports are blocked. Most are
showing closed but there are a couple showing open. I would have expected
that the default policy would be DENY but
On Sun, 2002-01-27 at 11:16, Harold Hartley wrote:
Anyone know where I can find a case that holds 2 motherboards..
thanks
Why would you need 2 motherboards in one case? If you really need
multiple systems in a small space, why not rack mounted systems?
--
I live in a nursing home and don't have the kind of money for a rackmount
system as I wish I did..
Harold
On Sunday 27 January 2002 01:35 pm, you wrote:
On Sun, 2002-01-27 at 11:16, Harold Hartley wrote:
Anyone know where I can find a case that holds 2 motherboards..
thanks
Why would
Hi all,
I'm finding that Galeon crashes frequently, well I'm assuming this is
the cause as the core seems stable.
After afew crashes I'm uable to get more than 1 workplace, I'm using
gnome with sawfish as the window manager, I've checked with gnome config
tool and the number of workplaces is set
On Sat, 26 Jan 2002 19:48:19 +0100
jipe [EMAIL PROTECTED] wrote:
Le Samedi 26 Janvier 2002 16:43, vous avez écrit :
On Sat, 26 Jan 2002 09:49:06 +0100
jipe [EMAIL PROTECTED] wrote:
hi all!
i'm using gimp-1.2.2 xsane-0.79 with sane-1.0.5
create a symlink in
Have you added the line:
iptables -A INPUT -i ppp0 -p udp --dport 139 -j DROP
to your iptables script.
Dave.
On Sun, 27 Jan 2002 13:42:41 -0500
daRcmaTTeR [EMAIL PROTECTED] wrote:
On Fri, 25 Jan 2002 07:26:23 -0700
Lee Roberts [EMAIL PROTECTED] studiouisly spake these words to ponder:
I just cannot figure this out.
I have an IBM ThinkPad 1412, Celeron 366, 96MB Ram, ESS Solo1 soundcard. The
sound NEVER works if I just install default Mandrake kernels. It loads
modules, even the correct modules, but sound never comes - so I always build
my own kernels with the solo1
I just cannot figure this out.
I have an IBM ThinkPad 1412, Celeron 366, 96MB Ram, ESS Solo1 soundcard. The
sound NEVER works if I just install default Mandrake kernels. It loads
modules, even the correct modules, but sound never comes - so I always build
my own kernels with the solo1
I am running Mandrake 8.1 with updates on an IBM Thinkpad 1412.
I downloaded and built the source rpm for the Mandrake kernel-2.4.17-10mdk.
There were no errors, no apparent problems. It will not, however, boot.
At bootup, it panics - cannot mount root fs at 01:00. I have a 2.4.17 kernel
On Sun, 2002-01-27 at 15:28, Praedor Tempus wrote:
I get sound working temporarily with kernel-2.4.8-34.1mdk and with kernel
2.4.17 from kernel.org (cannot get the Mandrake 2.4.17 kernel to work even
though I can get it to build - always with the kernel panic: VFS unable to
load root fs
Finally figured out why galeon's scrolling would on occasion follow my
mouse movement even though no button was down...
To reproduce, grab galeon's scrollbar by left-clicking on it, and before
releasing the button, move the pointer into any of the top menu/tool bars
and release it there... then
I'll take it...although I did specify the append= devfs=nomount option
in lilo.conf. I tried turning it on and off for the mandrake kernel. I have
it off for the kernel.org kernel - haven't tried turning it on. In any case,
the basic kernel starts fine.
I'd like to try the patch,
On Sun, 2002-01-27 at 15:37, Praedor Tempus wrote:
I am running Mandrake 8.1 with updates on an IBM Thinkpad 1412.
I downloaded and built the source rpm for the Mandrake kernel-2.4.17-10mdk.
There were no errors, no apparent problems. It will not, however, boot.
At bootup, it panics -
On Sun, 27 Jan 2002 20:22:15 -0500
David Stevenson [EMAIL PROTECTED] studiouisly spake these words to
ponder:
Have you added the line:
iptables -A INPUT -i ppp0 -p udp --dport 139 -j DROP
to your iptables script.
Dave.
as a matter of fact, yes...i did try that but it didn't seem to
On Sun, 2002-01-27 at 10:16, Harold Hartley wrote:
Anyone know where I can find a case that holds 2 motherboards..
thanks
ok, I don't work for super micro, I really am a band director in texas.
but they do have a case that will hold two mobos...
Uh, I guess I'm now confused...if the mandrake kernel has the patch and the
kernel.org kernel doesn't...and the Mandrake kernel refuses to boot (panics)
but the kernel.org kernel boots up fine, then it would seem that this patch
cannot do anything to help the Mandrake kernel. The Mandrake is
Man, it just seems like you're wasting a lot of time working on this
when you've got a fully functioning 2.4.17 kernel that you've
successfully built from source.
I don't know what these patches are that you're worried about, but IIRC,
they have some security enhancements/fixes? How many users
On Sun, 2002-01-27 at 13:20, richard wrote:
Hi all,
I'm finding that Galeon crashes frequently, well I'm assuming this is
the cause as the core seems stable.
After afew crashes I'm uable to get more than 1 workplace, I'm using
gnome with sawfish as the window manager, I've checked with
thanks I'll upgrade galeon to 1.0.1, I assume the rpms are on cooker ??
richard
On Sun, 2002-01-27 at 22:05, Jason Guidry wrote:
On Sun, 2002-01-27 at 13:20, richard wrote:
Hi all,
I'm finding that Galeon crashes frequently, well I'm assuming this is
the cause as the core seems
On Sun, 2002-01-27 at 16:27, richard wrote:
thanks I'll upgrade galeon to 1.0.1, I assume the rpms are on cooker ??
perhaps, but I'd just assume stop by
http://galeon.sourceforge.net/
you can get info on dependencies, as well as pick up some new themes and
spinners. =) oh, and tell the
I live in a nursing home and limited on funds for rackmounts gear..
And limited on space in my room...
I do remember about 2 or 3 years ago there were cases that held 2
motherboards..
I want to have a second system so I don't wreck my linux box I use daily and
have a linux box for trying
Hi ,
galeon 1.0.2 is now installed
looks like its missing a few things as the mandrake page looks horrible,
with missing icons...find those later ?
Back to the original question, on the bottom tool bar ( which gnome call
their panel), there is normally 4, or what ever amount is selected ,
I change devfs=mount to devfs = nomount in lilo.conf and now it works.
GT
- Original Message -
From: Simon Naish [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 23, 2002 4:13 AM
Subject: Re: [expert] Cd burn
This may be a silly question but have you tried cdrecord
Thanks for the help.
It now works perfectly.
GT
- Original Message -
From: Brian Schroeder [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, January 24, 2002 5:40 PM
Subject: Re: [expert] Cd burn
I totally lost my cdburner in 8.1, but managed to get it back and
working again by
This has been going on for quite some time, and we've finally tracked it
down.
When running gkrellm and the GKrellWeather plugin, it fails on the following:
400 FTP return code 500 at /usr/X11R6/bin/GrabWeather line 49.
which eventually tracks the troublemaker down to
On 26 Jan 02, at 9:48, William Bouterse wrote:
Have you considered SoundStudio?
http://prdownloads.sourceforge.net/studio/SoundStudio-1.0.6.tar.gz
It has always worked for me since LM 6.x, though I must
admit I have never tried it under KDE and 'aarts' as I use other WM's
It
As I'm no expert, this is the sort of circumstance in which I boot from
the install CD, select expert and upgrade, choose to install nothing and
let it fix the problem. It will almost certainly give you a bootable
system in 10 - 20 minutes.
No science, but it will probably work.
cheers
Brian
On Sun, 2002-01-27 at 17:46, richard wrote:
Hi ,
galeon 1.0.2 is now installed
looks like its missing a few things as the mandrake page looks horrible,
with missing icons...find those later ?
Maybe a missing library, or library version problem? Hard to say unless
we see a specific error
For some reason whenever I add a source to my urpmi database it becomes
corrupted in a way that won't let me update it. For example no matter
which Cooker source I add, whenever I use urpmi.update to update it I
get this back:
[root@Dreadnaught ndptal85]# urpmi.update
the entry to update is
I got it ; I think we should file a bug report to mdk;
its MandrakeUpdate for 8.1 is really buggy.
I have to reinstall from scratch and now I still can
not update, (If I use it is back). Just use it to
install packages from cdrom ;
--- NDPTAL85 [EMAIL PROTECTED] wrote: For
some reason
BWAHAHAHAHAHAHA! Classic *nix humor! And yikes! I actually agree with
the dreaded Woods! ;-) It's great!
Mike
J. Craig Woods wrote:
Ralph F. De Witt wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 26 January 2002 12:43, you wrote:
hi! have a look here!
Hi,
This is not running in mdk8.1 as the machine is too
old, 486 100Mh box 18Mb RAM, and a sound card (I am
not sure its type) working with sb.o driver in OSS
Free (the linux kernel) . I am trying to use it with
alsa but no success so far, tried using snd-card-sb8.o
; snd-card-sb16.o ,
You can buy them almost everywhere, but the price - at least if the
price here in Australia is any indication - is likely to be about 2-3
times your average quality case.
Brian
On Mon, 2002-01-28 at 12:57, gnerd wrote:
A google search turned up a lot of reviews on these cases, but after
Hi folks, I'm doubting to choose two different journalled FS ( XFS or RFS )
My opinion is that XFS has the best performance in all the fields.
Furthermore it has additional features due to its porting of IRIX, but I
also read that for other people RFS is the best one.
Also I read that RFS
I bought mine from http://www.mpcparts.com. I haven't checked the
latest prices lately, but if you go to pricewatch you will find the
vendors who sell them.
gnerd wrote:
A google search turned up a lot of reviews on these cases, but after
three pages of review links, my ADD kicked in and I
Hello Ricardo,
I was actually considering writing a bash script of this very feature today!
the problem is that you cant do mv dcp_0*.jpg pics-*.jpg or the like
in linux. DOS allows for ren dcp_0*.jpg pics-*.jpg but they have to be
the same number or characters...
I will check this out now.
On Mon, 28 Jan 2002, J. Grant wrote:
Hi, JG,
Thanks for the attention!
I've 'managed' it, for the time being with 'rename' but, it does not
covers all the details, i.e., on my case after long, long hours of
recording audio cassettes, mastering, signal processing and etc...
I've been using
OK, did you reflush/restart your firewall?
I am not an expert, but this is as far as my firewall knowledge goes.
Dave.
PS. My 139 is closed.
On Sun, 27 Jan 2002 16:38:39 -0500
daRcmaTTeR [EMAIL PROTECTED] wrote:
On Sun, 27 Jan 2002 20:22:15 -0500
David Stevenson [EMAIL PROTECTED]
I just checked, and rename does not seem to support renaming files such
as pic1, pic2 - pic1.jpg pic2.jpg etc? or does it?
it seems to require something to swap, the from option but if I want to
add at the end I can not.
I think there are better ways to do this using a bash script and mv, i
On Sun, 27 Jan 2002, D. R. Evans wrote:
I've been using gramofile (text mode) and audacity for 'tunning' on X.
Storing them with cddoit (very handy), the should be 'cd_do_it_all'.
And Audacity is similar do SoundStudio but faster! More than you can think
of!
After reading W.Bouterse, I've
Thanks Dave
very simple ! now back to normal
cheers
richard
On Mon, 2002-01-28 at 01:38, Dave Sherman wrote:
On Sun, 2002-01-27 at 17:46, richard wrote:
Hi ,
galeon 1.0.2 is now installed
looks like its missing a few things as the mandrake page looks horrible,
with missing
On Sun, 2002-01-27 at 17:57, gnerd wrote:
A google search turned up a lot of reviews on these cases, but after
three pages of review links, my ADD kicked in and I lost focus. ;-) How
much are they, and where can you buy them?
I've seen them advertised several places.
Try:
On Sun, 2002-01-27 at 17:57, gnerd wrote:
A google search turned up a lot of reviews on these cases, but after
three pages of review links, my ADD kicked in and I lost focus. ;-) How
much are they, and where can you buy them?
Just some added info on th eLian-Li cases:
If you go to
53 matches
Mail list logo
