in
the manual, had such an adjustment.
Is there any secret key combination or other means to make this RX
adjustment manually?
Thanks and 73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http
1dbm.
Do that with the 9800..
73,
Dudley
WA5QPZ
[...]
Is there a similar test for the SDR-1000?
Thanks,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman
be set up to a limit of 10 kHz if I recall correctly.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
operators or
organ concerts on broadcast stations.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Wow, thanks guys -- Lloyd, Chuck, Darrin, Duane, Gary, and Andrew --
for your quick and helpful responses on this subject!
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex
.
Thanks,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
once.
All the best,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
a
database. So it's nearly maxed out but still performs well.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
On 11/7/2014 10:43 AM, ke...@3950.net wrote:
[...]
and it worked splendidly. 2.5.3 is as high as you can go with PowerSDR.
[...]
With the SDR-1000, that is. With other rigs you can go up to 2.7.2
so far.
But 2.5.3 is excellent!
Kevin
as for
things to look at? 73 dale wt4t
I never had that happen -- but I went to 2.3.5 before going to 2.5.3.
You might try going back to a restore point to undo whatever is
causing the problem, and try again.
Best of luck,
Kevin.
___
FlexRadio
-66 on Ebay or elsewhere if he wanted to
switch:
http://www.ebay.com/sch/i.html?_from=R40_trksid=p2060778.m570.l1313.TR0.TRC0.H0.Xedirol+fa-66_nkw=edirol+fa-66_sacat=0
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
with the SDR-1000.
It must be 32-bit. I use Windows XP, but have heard that Windows 7
*32-bit version* can be used. Also, you must have a working parallel
port on the computer. Older computers that meet all these
requirements are cheap.
All the best,
Kevin, WB4AIO
[...]
Also, your friend will have to start out by installing PowerSDR 1.18
(I believe that's the number) before installing any later version.
The 1.x series installs certain necessary files for the SDR-1000
that must be present.
73,
Kevin.
___
FlexRadio
On 10/24/2014 1:58 PM, w...@reagan.com wrote:
KEVIN THANKS FOR THE INFO , HE HAS A XP MACHINE WITH A FIREWIRE
CARD AND 2 GIG OF RAM,ALSO A PARALLEL PORT. MY QUESTION I GUESS
IS THE FIRE BOX IS GOOD AS THE FA-66? DALE WT4T
[...]
You're welcome. The consensus seems to be that it's almost
On 10/19/2014 8:14 PM, Jim Jannuzzo wrote:
Turning on ESC and the second RX really gobbles CPU power. It
was the only time I had to upgrade my PC to compensate. Are you
running out of CPU resources? Jim KJ2P
[...]
Kevin,
Based on the description of your issue, additional information
, and
it is intermittent.
The only real solution is to manually turn off the second receiver
before transmitting. A database reset, even back to default
settings, is only a temporary fix; the garbling always returns after
a few minutes or hours.
Any ideas?
Thanks,
Kevin
if it solves the problem? It's
reversible if it doesn't.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
,
not the company itself) and advice are not welcome there, though I
would be delighted to hear that I am wrong. I don't see how having
such a section would be a burden on the company.
With my best,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex
some things there.
73,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
-1000, especially
its superb audio capabilities, and I am always learning something as
I use it.
73,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo
!
Eric:
Your solution was entirely correct. Thanks again to you and to Flex.
73,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
so it no
longer has any transmit profile associated with it, then it behaves
normally.
Any ideas?
Thanks,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo
I think the goal was to have a light and simple portable setup, not a
remote base. I know in my case that's what I was trying to achieve with
the t100.
73 de Kevin, WB2EMS
On 7/20/2014 10:35 PM, K0DAN wrote:
Why not run it as a remote station using Teamview, Skype, etc., for
the remote voice
with it and am sort of stymied. But as I recall I
was able to do most of the usually needed functions in tablet mode.
One of the many reasons I don't love Win8.1
73 de Kevin, WB2EMS
On 7/20/2014 9:52 PM, Neal Campbell wrote:
Bill, is that a tablet?
73
Neal Campbell
Abroham Neal LLC
, but I thought I would mention it,
as I have forgotten that step myself and Xed out of the window or
hit cancel -- and ended up still uncalibrated.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector
happened, as I haven't had the rig on in months.
Any ideas on what could have happened would be most appreciated.
Tnx,
Kim
K4ATX
[...]
This can happen if something is shorting the PTT line to ground.
73 and all the best,
Kevin, WB4AIO
as possible.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
functions in the TUNE mode. In all other modes, use the
REFLECTED power meter to ascertain your antenna matching.
With all good wishes.
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
menu) that might do the job for you, as long as
you use VAC or the line in jack on your computer to get audio into
Audacity.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
On 9/12/2013 5:58 AM, amfone wrote:
Anyone know where I can download older PowerSDR versions?
Thanks
Tim
WB8UHZ
[...]
Hi Tim --
You can start here:
http://support.flexradio.com/Downloads.aspx
Several different versions are available.
73,
Kevin, WB4AIO
in this case. Something has reset
settings in the computer's audio chain somewhere, I suspect.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
On 5/9/2013 1:14 PM, Tim Ellison wrote:
How ironic. The virus checker is the virus ;-)
[...]
Sure. Just like in reality; the protector eventually becomes the enemy.
K.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
On 4/30/2013 3:30 PM, ke...@3950.net wrote:
On 4/30/2013 11:36 AM, Neal Campbell wrote:
Kevin
You might check the memory sticks. I doubt strongly that
reinstalling will help (although its easy to do so feel free). If
you run a disk check and it comes up clean, its not disk so either
On 4/30/2013 5:22 AM, on4...@telenet.be wrote:
Kevin,
I would either suspect the anti-virus program or potentially also a faulty hard
drive (or at least may be some bad sectors on the drive).
The latter can be checked through a windows disk check utility, the former I
would exclude
import clears the problem -- for a day or two, then it
starts all over again.
Any ideas?
Thanks,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
noise at about -150 dB.
Reverting to my restore point and running 2.3.5 again, I have the
same problem. Has my hardware been damaged?
Any ideas?
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
modes and gain etc., but just hear residual
noise at about -150 dB.
Reverting to my restore point and running 2.3.5 again, I have the
same problem. Has my hardware been damaged?
Any ideas?
73,
Kevin, WB4AIO.
[...]
The problem is solved, I think. I had to power recycle the
transceiver itself
have or add a parallel
port adapter. I've never heard of anyone using an motherboard sound
card with it -- there would certainly be issues with other devices
trying to access the card at the same time.
Best of luck,
Kevin, WB4AIO.
___
FlexRadio
is this: If I upgrade to 2.5.3, will I increase or
decrease the processor load on my old computer? Or will it stay
about the same?
Thanks and 73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
that.
Best of luck in getting the sound you want -- no rig can do that
better than the Flex.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
:
[...]
Very well written indeed. I hope the presentation will have an
available online version as well.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
run faster and better and more ad-free without them
anyway!
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
with what you have and I'll respond
with photos and video of the rig working as well as arrange an on-air
sked. I'm looking for a base model 5000 but open to everything. I'll
make a decision on the responses I get by the end of the week.
Thanks
Kevin Whitcomb KD0RUR
...and now you've heard of Radio Flex, a long-ago predecessor:
http://www.ebay.com/itm/Radio-Flex-Vintage-Antique-Tube-Radio-Frequency-Transformer-250-600-Meters-/181051299811?pt=Vintage_Electronics_R2hash=item2a277f97e3
73 and happy New Year,
Kevin, WB4AIO
, and observing of the waveform
off the audio output of PowerSDR and, if you set the AGC and RF
preamp aggressively enough, it can be very tightly controlled. I
cannot imagine needing any post-processing to control it.
73,
Kevin, WB4AIO
think it's available free online.
With my best,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
There are still known bugs with not saving your choices in the antenna form
as confirmed by myself and Tim ... so not necessarily corrupt !
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Brian Lloyd
Sent: September-28-12
but with a distinct rising presence characteristic maxing out
around 4 kHz.
Happy experimenting,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
, sell support it,
so am selling through the Canadian distributor who can support it for a new
user.
This may be of interest to Canadian hams, but who knows they may sell to a US
ham also... ?
Kevin VE7OVY
___
FlexRadio Systems Mailing List
On 7/19/2012 9:09 PM, Larry wrote:
Kevin ... I have tried 6 add in parallel port cards and could not
get anyone to work. That was with XP Pro, Win7 32 bit, and Win7 64
bit. i gave up, bought an Intel motherboard with a parallel port
built in, core 2 quad Q6600 with 4 gig of memory and SSD Intel
Eddie AB2VW wrote:
Hi Kevin,
Please let me know if you find a solution to your problem. I
purchased my SDR1000 in 2006 and do not plan to get rid of it
until it gets struck by lightning. Then I'll pull out my backup
SDR1000 which is still in the box.
All the best,
Eddie in the Bronx AB2VW
task to make a new driver so that
PSDR under Win7-64 can talk properly to a parallel port? Why has no
one done this, at the company or privately?
Puzzled,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
card and its PCMCIA adapter/holder (a
thrift store purchase) is dead even though Windows says it is
functioning normally? I have tried three different parallel cables
with no difference between them.
With thanks for any ideas,
Kevin, WB4AIO
On 7/19/2012 7:45 PM, Larry wrote:
Hi Kevin,
Your parallel port is not working. If this is a fresh install of
PowerSDR version 2.o or higher, you must first install PowerSDR
version 1.8.6. You won't use it but there is something that gets
installed with 1.8.6 that makes the later version 2.xxx
motherboard. Is that
guaranteed to fail too?
Thanks for the quick response,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
On 7/19/2012 8:23 PM, ke...@3950.net wrote:
On 7/19/2012 7:45 PM, Larry wrote:
Hi Kevin,
Your parallel port is not working. If this is a fresh install of
PowerSDR version 2.o or higher, you must first install PowerSDR
version 1.8.6. You won't use it but there is something that gets
installed
address, and most others, I get the
MOX locked on effect, though no actual transmitting is taking
place since the relays never energize.
I wonder if there is a way to test parallel cards just to see if
they are outputting anything at all.
With thanks,
Kevin
an install of 1.1.8.
It has exactly the same problem -- no relay clicks when started.
73,
Kevin.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
Thanks for all the advice in this thread and those of you who contacted me
directly. I have to admit that the strong opinions (much appreciated) both ways
have left me a little confused on exactly what to do. I guess the smart thing
is to wait and save up for a 3000 although there's a 1500
Thanks for the input guys!
I can't take anything that looks like a radio, it could cause problems with
some of the places I go. My thought behind wanting a 1500 is that it looks like
a portable hard drive and is pretty small and light. Also, I was thinking that
the cost of a used 1500 plus a
on the
realities of taking a flex rig into different countries and operating them in
primitive conditions? (Jungle, desert, etc…)
Thank You,
Kevin Whitcomb
KD0RUR
eyesofman.org
___
FlexRadio Systems Mailing List
FlexRadio@flex
wow look into this http://www.news-l5.net/jobs/?page=6966922
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
.
[...]
Build a man a fire and you warm him for a day.
Set a man on fire and you warm him for the rest of his life.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
to the Flex, as no
one has ever done this commercially that I know of.
Further processing of the stereo signal could be done, too, but
that's enough for one suggestion.
With all good wishes,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
Zuckerberg's employees and the government have more
than the usual percentage of malicious people. And just maybe there
are more of them than there used to be. One makes one's choices and
takes one's chances, and may our screen names confound them!
With all good wishes,
Kevin, WB4AIO
frequencies? For example,
could you note the center frequency that is set when recording
begins, and then set the software to that frequency when beginning
playback, or something like that?
Thanks,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
.
If, even under no mic / dummy load conditions, there's still a large
initial pulse, then I'd say there's a good chance the transceiver is
defective.
With all good wishes,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
not even need the headphone amp.
All the best and happy New Year,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
the
appropriate gain sliders in sound mixer and PowerSDR and see if that
takes care of it.
In my experience, the AM demodulation of PowerSDR is among the best
I've ever heard, and I am very picky.
With my best,
Kevin, WB4AIO.
___
FlexRadio Systems
.
With best Yule wishes,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
positive peaks are present, a light could flash, too. It could be
labeled W3DUQ.
73,
Kevin, WB4AIO.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
to about 20 millisecond sweep rate
should allow you to see if this is happening internally in PowerSDR.
This free program
http://www.zeitnitz.de/Christian/scope_en
will allow you see if there is any clipping happening later on down
the line in your system.
All the best,
Kevin, WB4AIO
. No problem. The whips
could even be mounted in your closet, since the software would
account for that.
All the best,
Kevin, WB4AIO.
(the preceding post is not entirely serious!)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
Hi
Any experts on FLEX5000 - Linrad - MAP65 out there?
73 Kevin
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
to the radio power connector. Looks like I
blew a fuse, or some sort of worse hardware failure. Where do I start?
Kevin, WB2EMS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
on it in
case it was sticking.
I presume since there isn't a fuse in the external cable, there is an
internal fuse?
Kevin, WB2EMS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
144.2 on VFO-A . noise floor -130dBm
Do AB
144.2 on VFO-B . noise floor -140dBm
Any idea why the 10dB difference?
TNX 73 Kevin
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo
.
Is this correct (or backwards)?
73 Kevin
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
:
TX1 to switch 250ms before the Flex actually transmits
TX2 to switch 150ms before the Flex actually transmits
Resulting in:
T/R relay to switch, followed by amp to key 100mS later, followed by Flex to
transmit another 150mS later.
Is this correct (or backwards)?
73 Kevin
And, every time restart PowerSDR it seems to untick my TX3 setting for 6m
and leaves only TX1 ticked?
Does it not like using 2 TX ports on 1 band?
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Kevin Hobbs
Sent: September
Hi
I always find that I like the sound of a station on SSB when I tune 100 Hz
off .. ie: 50.109900 instead of 50.110.
Is there an easy way to put this 100Hz offset into the powerSDR setup?
73 Kevin
___
FlexRadio Systems Mailing List
FlexRadio
I am trying to run WSJT on Digu (Flex 5000).
After I TX, the MOX stays on . ie: does not switch back to RX.
Do I have some option selected incorrectly?
Any help appreciated.
73 Kevin
___
FlexRadio Systems Mailing List
FlexRadio@flex
I have a couple of accessories available if anyone is interested. Please
contact me direct ve...@cogeco.ca
1) 3DCONNEXION Space Navigator
2) Wood Box Radio Tmate
Both in as new condition.
73 Kevin
___
FlexRadio Systems Mailing
if the
Sidetone box is ticked. Unticking Sidetone brings the RX Audio back?
Thanks, Kevin
___
Flexedge mailing list
flexe...@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail
an audio taper
pot helps in being able to adjust it to a good level for the
microphone input. When you get it right, especially with the noise
canceling mics, all you hear is your voice, nothing in the background.
Not as much of a concern in the shack. :-)
Kevin, WB2EMS
mikes, classic radio mikes, aviation headsets,
inexpensive electret elements - isn't it nice to have choices? :-)
de Kevin, WB2EMS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
, powering down the radio and
bringing it back up and then starting PowerSDR again restored it.
I have not experienced this on the earlier versions.
Running XP, SP3 also.
Kevin, WB2EMS
73, Bob
KA9UVY
___
FlexRadio Systems Mailing List
FlexRadio
diagram.
73 Kevin
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: February-24-11 10:54 PM
To: Williams, Barry; 'flexradio@flex-radio.biz'
Subject: Re: [Flexradio] Values
For Phone, I use:
Sampling rate: 192K
Hi
I have been experimenting with the PowerSDR window size. By changing the
vertical height of the window (to get more / less panadpter size), I see my
CPU % very by as much as 20% (from 5 - 25) with only minimal changes in the
size. Does anyone else see this?
73 Kevin
Of
Graham Haddock
Sent: February-24-11 2:17 PM
To: Kevin Hobbs
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] CPU % vs Window Size
Kevin:
This is normal behavior.
It takes more computer power to draw a bigger sized screen (for things that
are changing.)
Try setting the panadaptor display
Really . I am running a Nvidia GeForce 9800 GT Dual Display Adapter . I
thought that was a pretty decent card???
From: nealk...@gmail.com [mailto:nealk...@gmail.com] On Behalf Of Neal
Campbell
Sent: February-24-11 2:58 PM
To: Kevin Hobbs
Cc: Graham Haddock; flexradio@flex-radio.biz
Hi Neal . I was able to find a newer XP Nvidia driver . it seems to have
also lowered CPU usage further . its hard to keep up with all this stuff! 73
Kevin
From: nealk...@gmail.com [mailto:nealk...@gmail.com] On Behalf Of Neal
Campbell
Sent: February-24-11 2:58 PM
To: Kevin Hobbs
I agree Ted ... I have been at this for years, not months, and I don't have
much more of a clue than you!
Things like:
1) If I choose different sampling rates / buffer sizes ... what does that
really get me?
2) I have tried Heils with HC-4, HC-5, HC-6 ... no ever says you sound
great like they
, etc??? These
things didn't seem to change ... so I don't understand why they must be
continually re-entered manually?
73 Kevin
-Original Message-
From: flexedge-boun...@flex-radio.biz
[mailto:flexedge-boun...@flex-radio.biz] On Behalf Of Gerald Youngblood
Sent: February-18-11 3:59 PM
Hey Gerald ... good thing you guys are in Texas ... if you were in the North
or Canada you'd never be open! HAHA. Kevin
-Original Message-
From: flexedge-boun...@flex-radio.biz
[mailto:flexedge-boun...@flex-radio.biz] On Behalf Of Gerald Youngblood
Sent: February-09-11 9:36 AM
on the bands with the
panadapter. It definitely helped me work more stations that I probably
would have missed if I'd just been randomly tuning back and forth. Got
good reports on the flex-transverter combination also.
Thanks
Kevin, WB2EMS
___
FlexRadio
and knowledge base.
Thanks in advance
Kevin, WB2EMS
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
had
the mods already done or not. For me ,this amp cost less than a new ALS-600 and
gave more features (autotuner) - and looks really nice!.
Best wishes,
---
Kevin Hartley VE7OVY
Victoria BC Canada
--
---Original Message---
Message: 38
Hi Ross
Doesn't agree with what I see ... my 5000 used to make very close 100W (a
little under). After recent return from VU upgrade I am only seeing 70-86W
HF-50. I will try to recalibrate when I get a chance and see if I can find
my missing watts!
Kevin
-Original Message-
From
with second receiver installed.
Windows XP SP3 on a dual 2.8 Ghz Opteron system (re-purposed math
workstation) with 3gb of RAM. CPU runs about 17%. Hotfix for firewire
done and speed now reports S400 correctly.
VAC 4.10
I'd appreciate any pointers.
Thanks
Kevin, WB2EMS
1 - 100 of 166 matches
Mail list logo