5:04 PM
To: Tim Ellison; Brian Lloyd
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex-3000 and PACTOR-III?
I will have a detailed "how to" for setting up Pactor on the FLEX family
of SDRs posted in the Knowledge Center later this weekend. I am in the
final stages of collect
3:31 PM
To: Brian Lloyd
Cc: Ray Andrews, K9DUR; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex-3000 and PACTOR-III?
We were running a Pactor demo @ Dayton on FLEX-3000 using the Flexwire
interface, so it does work.
-Tim
Sent from my iPhone
On Jun 20, 2009, at 3:07 PM, "Bria
We were running a Pactor demo @ Dayton on FLEX-3000 using the
Flexwire interface, so it does work.
-Tim
Sent from my iPhone
On Jun 20, 2009, at 3:07 PM, "Brian Lloyd"
wrote:
> On Sat, Jun 20, 2009 at 11:42 AM, Ray Andrews,
> K9DUR wrote:
>> Brian,
>>
>> I apologize. Your are co
On Sat, Jun 20, 2009 at 11:42 AM, Ray Andrews, K9DUR wrote:
> Brian,
>
> I apologize. Your are correct. I leapt without looking at the manual. I
> did not realize that Flex had included the audio in/out lines on the
> FlexWire connector. Oops!
No worries. Now if only they have put PTT there as
Brian,
I apologize. Your are correct. I leapt without looking at the manual. I
did not realize that Flex had included the audio in/out lines on the
FlexWire connector. Oops!
73, Ray, K9DUR
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.b
On Sat, Jun 20, 2009 at 11:17 AM, Ray Andrews, K9DUR wrote:
> Gary,
>
> Do NOT confuse the "Line In" and "Line Out" pins on the FlexWire connector
> with any type of audio signals. ...
> Bottom line: The FlexWire connector does NOT provide access to any analog
> audio signals, either TX audio or
Gary,
Do NOT confuse the "Line In" and "Line Out" pins on the FlexWire connector
with any type of audio signals. They are communications lines for a
firewire-type communications port. The FlexWire connector is for
communicating with 3rd-party peripherals, such as the Universal Controller
Board (
On Sat, Jun 20, 2009 at 10:14 AM, Gary Strong wrote:
> Brian:
> Thanks. The Flex-3000 has a "FlexWire" Bus jack on the back, whose
> pin-out table in the manual shows that it has a "line-in" (pin 2) and
> "line-out" (pin 9). (There is also a separate PTT jack on the back.
> But, I suspect your su
lexradio@flex-radio.biz
Subject: Re: [Flexradio] Flex-3000 and PACTOR-III?
On Sat, Jun 20, 2009 at 8:30 AM, Gary Strong
wrote:
>
> I have had my Flex-3000 for a few weeks now and am extremely pleased
> with it. No setup issues, and the new PowerSDR release 1.18.1 is
> fantastic!
On Sat, Jun 20, 2009 at 8:30 AM, Gary Strong wrote:
>
> I have had my Flex-3000 for a few weeks now and am extremely pleased
> with it. No setup issues, and the new PowerSDR release 1.18.1 is
> fantastic! Question: Has anyone successfully tried using PACTOR-III
> with the Flex 3000 or 5000? I h
10 matches
Mail list logo
