RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Hi Rick,
I'd love to apply what you describe below. However, in my FM10 Fminit folder, I 
have a configui folder (no config folder), and no customui.cfg file. Can you 
tell me which of the files in there is the right one:

Cmds.cfg (which I see someone has already mentioned...)
Mathcmds.cfg
Sample.cfg
Wincmds.cfg

Or do I need to create a config folder and a file called customui.cfg?


Oh, and while I'm emailing the list:
Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
screenshot), FM centers the frame. I need my graphic frames left-aligned, so it 
is a pain to have to reset this each time.
I hunted through the maker.ini file but found nothing. Is there some way of 
setting FM to always left-align new graphic frames?

Thanks,
Heidi
--

Message: 11
Date: Fri, 15 Mar 2013 22:04:34 -0400
From: Rick Quatro r...@rickquatro.com
To: 'Syed Zaeem Hosain' syed.hos...@aeris.net,  'Alison Craig'
alison.cr...@ultrasonix.com,  'Fred Ridder' docu...@hotmail.com,
framers@lists.frameusers.com
Subject: RE: Cursor key navigation in tables
Message-ID: 001701ce21ea$9f464710$ddd2d530$@com
Content-Type: text/plain;   charset=us-ascii

Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
these lines:

Modify MoveIPToCellAtRight KeySequence /Right 
Modify MoveIPToCellAtLeft KeySequence /Left 
Modify MoveIPToCellAbove KeySequence /Up 
Modify MoveIPToCellBelow KeySequence /Down 

Quit and restart FrameMaker. Then you should be able to navigate cells using
the arrow keys.



Technical Author
OCZ Technology Ltd
25B-25C Western Avenue
Milton Park
Abingdon
Oxfordshire
OX14 4SH
Registered in England no 7806324
Registered Address:  As Above
Tel: +44 (0) 1235 824900
Fax: +44 (0) 1235 821141
Email: hbai...@ocztechnology.com
Web: http://www.ocztechnology.com



CONFIDENTIAL COMMUNICATION:  This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law.  Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Lin Sims 
I created a customui.cfg file and put it in the fminit\configui folder
and it works perfectly. The only caveat, as I noted in a different
email, is that cursor navigation apparently no longer works in regular
text.

Bruce Foster's ImpGraph plugin did what you wanted, but with his death
it is, as far as I know, no longer available. Maybe someone has a copy
they'd be willing to give you.

On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey hbai...@ocztechnology.com wrote:
 Hi Rick,
 I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
 I have a configui folder (no config folder), and no customui.cfg file. Can 
 you tell me which of the files in there is the right one:

 Cmds.cfg (which I see someone has already mentioned...)
 Mathcmds.cfg
 Sample.cfg
 Wincmds.cfg

 Or do I need to create a config folder and a file called customui.cfg?


 Oh, and while I'm emailing the list:
 Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
 screenshot), FM centers the frame. I need my graphic frames left-aligned, so 
 it is a pain to have to reset this each time.
 I hunted through the maker.ini file but found nothing. Is there some way of 
 setting FM to always left-align new graphic frames?

 Thanks,
 Heidi
 --

 Message: 11
 Date: Fri, 15 Mar 2013 22:04:34 -0400
 From: Rick Quatro r...@rickquatro.com
 To: 'Syed Zaeem Hosain' syed.hos...@aeris.net,  'Alison Craig'
 alison.cr...@ultrasonix.com,  'Fred Ridder' docu...@hotmail.com,
 framers@lists.frameusers.com
 Subject: RE: Cursor key navigation in tables
 Message-ID: 001701ce21ea$9f464710$ddd2d530$@com
 Content-Type: text/plain;   charset=us-ascii

 Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
 these lines:

 Modify MoveIPToCellAtRight KeySequence /Right 
 Modify MoveIPToCellAtLeft KeySequence /Left 
 Modify MoveIPToCellAbove KeySequence /Up 
 Modify MoveIPToCellBelow KeySequence /Down 

 Quit and restart FrameMaker. Then you should be able to navigate cells using
 the arrow keys.



 Technical Author
 OCZ Technology Ltd
 25B-25C Western Avenue
 Milton Park
 Abingdon
 Oxfordshire
 OX14 4SH
 Registered in England no 7806324
 Registered Address:  As Above
 Tel: +44 (0) 1235 824900
 Fax: +44 (0) 1235 821141
 Email: hbai...@ocztechnology.com
 Web: http://www.ocztechnology.com



 CONFIDENTIAL COMMUNICATION:  This communication including any attached 
 file(s) is CONFIDENTIAL, intended only for the named recipient (s) above and 
 contains trade secrets or other information that is exempt from disclosure 
 under applicable law.  Any use, dissemination, distribution or copying of 
 this communication and any file attachments by anyone other than the named 
 recipient (s) is strictly prohibited. If you have received this communication 
 in error, please immediately notify us by reply electronic mail and 
 permanently delete the original transmission and any attachments from your 
 computer system and any copies of this message and file attachments. Thank 
 you.
 ___


 You are currently subscribed to framers as ljsims...@gmail.com.

 Send list messages to framers@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit 
 http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.



-- 
Lin Sims
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Mike Wickham 
I'm sure the folder name was just a typo on Rick's part. The folder is 
configui. Create a text file called customui.cfg to hold the commands.


The other files you mentioned can be edited, too, but it's best to put 
all your customizations in the customui.cfg file. FrameMaker reads it 
last, and overwrites definitions loaded from the other files. So if an 
entry doesn't work out, you can delete it and FrameMaker will return to 
default behavior without having to reenter the original values. It's 
much easier to test and make changes that way, and easier to move your 
customizations to future FM versions.


Mike Wickham

On 3/18/2013 8:40 AM, Heidi Bailey wrote:

Hi Rick,
I'd love to apply what you describe below. However, in my FM10 Fminit folder, I 
have a configui folder (no config folder), and no customui.cfg file. Can you 
tell me which of the files in there is the right one:

Cmds.cfg (which I see someone has already mentioned...)
Mathcmds.cfg
Sample.cfg
Wincmds.cfg

Or do I need to create a config folder and a file called customui.cfg?





___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Thanks!

-Original Message-
From: Harro de Jong [mailto:harro.dej...@triviewgroup.com]
Sent: 18 March 2013 13:50
To: Heidi Bailey
Cc: framers@lists.frameusers.com
Subject: RE: Cursor key navigation in tables - and another thing (graphic frame 
placement)

Heidi Bailey wrote:


 I'd love to apply what you describe below. However, in my FM10 Fminit
 folder, I have a configui folder (no config folder), and no
 customui.cfg file. Can you tell me which of the files in there is the right 
 one:

 Cmds.cfg (which I see someone has already mentioned...) Mathcmds.cfg
 Sample.cfg Wincmds.cfg

 Or do I need to create a config folder and a file called customui.cfg?

configui is the correct folder name. If customui.cfg doesn't exist, you can 
create it in this folder.


 Oh, and while I'm emailing the list:
 Whenever I put a new graphic frame in (eg when doing Esc fif to place
 a screenshot), FM centers the frame. I need my graphic frames
 left-aligned, so it is a pain to have to reset this each time.
 I hunted through the maker.ini file but found nothing. Is there some
 way of setting FM to always left-align new graphic frames?

No. I used to use QuicKeys to change this for all frames in a book, but sadly 
that isn't officially supported under Windows 7 anymore. Some people have got 
it to work though.

Harro de Jong
Triview

CONFIDENTIAL COMMUNICATION:  This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law.  Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: [JUNK] Re: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Oh, odd. I missed that - not helpful!
Thanks,
Heidi

-Original Message-
From: Lin Sims [mailto:ljsims...@gmail.com]
Sent: 18 March 2013 14:02
To: Heidi Bailey
Cc: r...@rickquatro.com; framers@lists.frameusers.com
Subject: [JUNK] Re: Cursor key navigation in tables - and another thing 
(graphic frame placement)
Importance: Low

I created a customui.cfg file and put it in the fminit\configui folder and it 
works perfectly. The only caveat, as I noted in a different email, is that 
cursor navigation apparently no longer works in regular text.

Bruce Foster's ImpGraph plugin did what you wanted, but with his death it is, 
as far as I know, no longer available. Maybe someone has a copy they'd be 
willing to give you.

On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey hbai...@ocztechnology.com wrote:
 Hi Rick,
 I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
 I have a configui folder (no config folder), and no customui.cfg file. Can 
 you tell me which of the files in there is the right one:

 Cmds.cfg (which I see someone has already mentioned...) Mathcmds.cfg
 Sample.cfg Wincmds.cfg

 Or do I need to create a config folder and a file called customui.cfg?


 Oh, and while I'm emailing the list:
 Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
 screenshot), FM centers the frame. I need my graphic frames left-aligned, so 
 it is a pain to have to reset this each time.
 I hunted through the maker.ini file but found nothing. Is there some way of 
 setting FM to always left-align new graphic frames?

 Thanks,
 Heidi
 --

 Message: 11
 Date: Fri, 15 Mar 2013 22:04:34 -0400
 From: Rick Quatro r...@rickquatro.com
 To: 'Syed Zaeem Hosain' syed.hos...@aeris.net,  'Alison Craig'
 alison.cr...@ultrasonix.com,  'Fred Ridder' docu...@hotmail.com,
 framers@lists.frameusers.com
 Subject: RE: Cursor key navigation in tables
 Message-ID: 001701ce21ea$9f464710$ddd2d530$@com
 Content-Type: text/plain;   charset=us-ascii

 Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor
 and add these lines:

 Modify MoveIPToCellAtRight KeySequence /Right  Modify
 MoveIPToCellAtLeft KeySequence /Left  Modify MoveIPToCellAbove
 KeySequence /Up  Modify MoveIPToCellBelow KeySequence /Down 

 Quit and restart FrameMaker. Then you should be able to navigate cells
 using the arrow keys.



 Technical Author
 OCZ Technology Ltd
 25B-25C Western Avenue
 Milton Park
 Abingdon
 Oxfordshire
 OX14 4SH
 Registered in England no 7806324
 Registered Address:  As Above
 Tel: +44 (0) 1235 824900
 Fax: +44 (0) 1235 821141
 Email: hbai...@ocztechnology.com
 Web: http://www.ocztechnology.com



 CONFIDENTIAL COMMUNICATION:  This communication including any attached 
 file(s) is CONFIDENTIAL, intended only for the named recipient (s) above and 
 contains trade secrets or other information that is exempt from disclosure 
 under applicable law.  Any use, dissemination, distribution or copying of 
 this communication and any file attachments by anyone other than the named 
 recipient (s) is strictly prohibited. If you have received this communication 
 in error, please immediately notify us by reply electronic mail and 
 permanently delete the original transmission and any attachments from your 
 computer system and any copies of this message and file attachments. Thank 
 you.
 ___


 You are currently subscribed to framers as ljsims...@gmail.com.

 Send list messages to framers@lists.frameusers.com.

 To unsubscribe send a blank email to
 framers-unsubscr...@lists.frameusers.com
 or visit
 http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.
 com

 Send administrative questions to listad...@frameusers.com. Visit
 http://www.frameusers.com/ for more resources and info.



--
Lin Sims

CONFIDENTIAL COMMUNICATION:  This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law.  Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Fred Ridder 

One solution to this is to define the KeySequence for navigation within a table 
to use one or more modifier keys (Shift, Ctrl, or Alt) in addition to the 
cursor keys. This change does not affect the function of the unmodified cursor 
keys in regular text. 

To specify a modifier key in a KeySequence string, just use a plus sign for 
Shift, a caret for Ctrl, or a tilde for Alt. The modifier key symbol(s) needs 
to appear at the start of the string with no space (i.e. immediately to the 
left of the slash). For example:
Modify MoveIPToCellBelow KeySequence ^/Down 
would define the keystroke combination for moving down a row in a table to be 
the Ctrl key plus the down arrow cursor key.

BTW, all of this is documented in a PDF called CustomizingfFrameProducts.pdf 
that Adobe used to distribute in the Documentation directory of the FrameMaker 
installation. Unfortunately, this document was last updated for FrameMaker 7.0, 
and was no longer distributed with versions after 9.0.  I would hope that this 
file is still available somewhere on the Adobe website, but I suspect that may 
be over-optimistic. 

-Fred Ridder

 Date: Mon, 18 Mar 2013 10:02:10 -0400
 Subject: Re: Cursor key navigation in tables - and another thing (graphic 
 frame placement)
 From: ljsims...@gmail.com
 To: hbai...@ocztechnology.com
 CC: framers@lists.frameusers.com
 
 I created a customui.cfg file and put it in the fminit\configui folder
 and it works perfectly. The only caveat, as I noted in a different
 email, is that cursor navigation apparently no longer works in regular
 text.
 
 Bruce Foster's ImpGraph plugin did what you wanted, but with his death
 it is, as far as I know, no longer available. Maybe someone has a copy
 they'd be willing to give you.
 
 On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey hbai...@ocztechnology.com 
 wrote:
  Hi Rick,
  I'd love to apply what you describe below. However, in my FM10 Fminit 
  folder, I have a configui folder (no config folder), and no customui.cfg 
  file. Can you tell me which of the files in there is the right one:
 
  Cmds.cfg (which I see someone has already mentioned...)
  Mathcmds.cfg
  Sample.cfg
  Wincmds.cfg
 
  Or do I need to create a config folder and a file called customui.cfg?
 
 
  Oh, and while I'm emailing the list:
  Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
  screenshot), FM centers the frame. I need my graphic frames left-aligned, 
  so it is a pain to have to reset this each time.
  I hunted through the maker.ini file but found nothing. Is there some way of 
  setting FM to always left-align new graphic frames?
 
  Thanks,
  Heidi
  --
 
  Message: 11
  Date: Fri, 15 Mar 2013 22:04:34 -0400
  From: Rick Quatro r...@rickquatro.com
  To: 'Syed Zaeem Hosain' syed.hos...@aeris.net,  'Alison Craig'
  alison.cr...@ultrasonix.com,  'Fred Ridder' 
  docu...@hotmail.com,
  framers@lists.frameusers.com
  Subject: RE: Cursor key navigation in tables
  Message-ID: 001701ce21ea$9f464710$ddd2d530$@com
  Content-Type: text/plain;   charset=us-ascii
 
  Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
  these lines:
 
  Modify MoveIPToCellAtRight KeySequence /Right 
  Modify MoveIPToCellAtLeft KeySequence /Left 
  Modify MoveIPToCellAbove KeySequence /Up 
  Modify MoveIPToCellBelow KeySequence /Down 
 
  Quit and restart FrameMaker. Then you should be able to navigate cells using
  the arrow keys.



  ___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Rick Quatro 
Klaus Daube has a bunch of good materials for later versions of FrameMaker.

http://www.daube.ch/docu/fmaker00.html

There is a link towards the bottom to Customising FrameMaker 11 (also valid
for FM-9 and 10). Klaus is very thorough and generous with his information.

Rick Quatro
Carmen Publishing Inc.
585-283-5045
r...@frameexpert.com




At 10:39 -0400 18/3/13, Fred Ridder wrote:

BTW, all of this is documented in a PDF called
CustomizingfFrameProducts.pdf that Adobe used to distribute in the
Documentation directory of the FrameMaker installation. Unfortunately, this
document was last updated for FrameMaker 7.0, and was no longer distributed
with versions after 9.0.  I would hope that this file is still available
somewhere on the Adobe website, but I suspect that may be over-optimistic.

I have a copy, but only the Mac version, which might not be the same.

Try this: http://help.adobe.com/en_US/FrameMaker/8.0/customize_frame.pdf

-- 
Steve


___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Shmuel Wolfson 

  
  
Good idea. 
  
  What are the symbols for the ALT, CTRL, SHIFT and Windows Key?
  
  Regards,
Shmuel Wolfson
Technical Writer
052-763-7133

  
  On 18-Mar-13 4:39 PM, Fred Ridder wrote:


  
  
One solution to this is to define the KeySequence for navigation
within a table to use one or more modifier keys (Shift, Ctrl, or
Alt) in addition to the cursor keys. This change does not affect
the function of the unmodified cursor keys in regular text. 

To specify a modifier key in a KeySequence string, just use a
plus sign for Shift, a caret for Ctrl, or a tilde for Alt. The
modifier key symbol(s) needs to appear at the start of the
string with no space (i.e. immediately to the left of the
slash). For example:
Modify MoveIPToCellBelow KeySequence ^/Down 
would define the keystroke combination for moving down a row in
a table to be the Ctrl key plus the down arrow cursor key.

BTW, all of this is documented in a PDF called
CustomizingfFrameProducts.pdf that Adobe used to distribute in
the Documentation directory of the FrameMaker installation.
Unfortunately, this document was last updated for FrameMaker
7.0, and was no longer distributed with versions after 9.0. I
would hope that this file is still available somewhere on the
Adobe website, but I suspect that may be over-optimistic. 

-Fred Ridder

 Date: Mon, 18 Mar 2013 10:02:10 -0400
   Subject: Re: Cursor key navigation in tables - and
  another thing (graphic frame placement)
   From: ljsims...@gmail.com
   To: hbai...@ocztechnology.com
   CC: framers@lists.frameusers.com
   
   I created a customui.cfg file and put it in the
  fminit\configui folder
   and it works perfectly. The only caveat, as I noted in a
  different
   email, is that cursor navigation apparently no longer
  works in regular
   text.
   
   Bruce Foster's ImpGraph plugin did what you wanted, but
  with his death
   it is, as far as I know, no longer available. Maybe
  someone has a copy
   they'd be willing to give you.
   
   On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey
  hbai...@ocztechnology.com wrote:
Hi Rick,
I'd love to apply what you describe below. However,
  in my FM10 Fminit folder, I have a configui folder (no config
  folder), and no customui.cfg file. Can you tell me which of
  the files in there is the right one:
   
Cmds.cfg (which I see someone has already
  mentioned...)
Mathcmds.cfg
Sample.cfg
Wincmds.cfg
   
Or do I need to create a config folder and a file
  called customui.cfg?
   
   
Oh, and while I'm emailing the list:
Whenever I put a new graphic frame in (eg when doing
  Esc fif to place a screenshot), FM centers the frame. I need
  my graphic frames left-aligned, so it is a pain to have to
  reset this each time.
I hunted through the maker.ini file but found
  nothing. Is there some way of setting FM to always left-align
  new graphic frames?
   
Thanks,
Heidi
--
   
Message: 11
Date: Fri, 15 Mar 2013 22:04:34 -0400
From: "Rick Quatro" r...@rickquatro.com
To: "'Syed Zaeem Hosain'"
  syed.hos...@aeris.net, "'Alison Craig'"
alison.cr...@ultrasonix.com, "'Fred Ridder'"
  docu...@hotmail.com,
framers@lists.frameusers.com
Subject: RE: Cursor key navigation in tables
Message-ID:
  001701ce21ea$9f464710$ddd2d530$@com
Content-Type: text/plain; charset="us-ascii"
   
Open the FrameMaker/Fminit/Config/customui.cfg file
  in a text editor and add
these lines:
   
Modify MoveIPToCellAtRight KeySequence
  /Right 
Modify MoveIPToCellAtLeft KeySequence /Left
  
Modify MoveIPToCellAbove KeySequence /Up
  
Modify MoveIPToCellBelow KeySequence /Down
  
   
Quit and restart FrameMaker. Then you should be able
  to navigate cells using
the arrow keys.
  
  
  

  
  
  
  
  ___


You are currently subscribed to framers as shmue...@gmail.com.

Send list messages to framers@lists.frameusers.com.

To

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Fred Ridder 

Umm, I think I indicated that in my previous message. To designate modifier 
keys in a KeySequence string:
 - Shift key is +
 - Ctrl key is ^
 - Atl key is ~

AFAIK, FrameMaker does not support any use of the Windows key.

Note that when defining a KeySequence that uses a modifier key (or a 
combination of modifier keys), the modifier key(s) and the key that follows are 
pressed *in combination* rather than as a sequence of separate keystrokes. 
(Most existing KeySequence definitions start with the Esc key, which is denoted 
by \!, followed by several case-sensitive letters that are pressed in sequence.)

-Fred Ridder

Date: Mon, 18 Mar 2013 18:25:53 +0200
From: shmue...@gmail.com
To: docu...@hotmail.com; framers@lists.frameusers.com
Subject: Re: Cursor key navigation in tables - and another thing (graphic frame 
placement)


  

  
  
Good idea. 

  

  What are the symbols for the ALT, CTRL, SHIFT and Windows Key?

  

  Regards,
Shmuel Wolfson
Technical Writer
052-763-7133

  

  On 18-Mar-13 4:39 PM, Fred Ridder wrote:



  
  
One solution to this is to define the KeySequence for navigation
within a table to use one or more modifier keys (Shift, Ctrl, or
Alt) in addition to the cursor keys. This change does not affect
the function of the unmodified cursor keys in regular text. 



To specify a modifier key in a KeySequence string, just use a
plus sign for Shift, a caret for Ctrl, or a tilde for Alt. The
modifier key symbol(s) needs to appear at the start of the
string with no space (i.e. immediately to the left of the
slash). For example:

Modify MoveIPToCellBelow KeySequence ^/Down 

would define the keystroke combination for moving down a row in
a table to be the Ctrl key plus the down arrow cursor key.



BTW, all of this is documented in a PDF called
CustomizingfFrameProducts.pdf that Adobe used to distribute in
the Documentation directory of the FrameMaker installation.
Unfortunately, this document was last updated for FrameMaker
7.0, and was no longer distributed with versions after 9.0.  I
would hope that this file is still available somewhere on the
Adobe website, but I suspect that may be over-optimistic. 



-Fred Ridder



 Date: Mon, 18 Mar 2013 10:02:10 -0400

   Subject: Re: Cursor key navigation in tables - and
  another thing (graphic frame placement)

   From: ljsims...@gmail.com

   To: hbai...@ocztechnology.com

   CC: framers@lists.frameusers.com

   

   I created a customui.cfg file and put it in the
  fminit\configui folder

   and it works perfectly. The only caveat, as I noted in a
  different

   email, is that cursor navigation apparently no longer
  works in regular

   text.

   

   Bruce Foster's ImpGraph plugin did what you wanted, but
  with his death

   it is, as far as I know, no longer available. Maybe
  someone has a copy

   they'd be willing to give you.

   

   On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey
  hbai...@ocztechnology.com wrote:

Hi Rick,

I'd love to apply what you describe below. However,
  in my FM10 Fminit folder, I have a configui folder (no config
  folder), and no customui.cfg file. Can you tell me which of
  the files in there is the right one:

   

Cmds.cfg (which I see someone has already
  mentioned...)

Mathcmds.cfg

Sample.cfg

Wincmds.cfg

   

Or do I need to create a config folder and a file
  called customui.cfg?

   

   

Oh, and while I'm emailing the list:

Whenever I put a new graphic frame in (eg when doing
  Esc fif to place a screenshot), FM centers the frame. I need
  my graphic frames left-aligned, so it is a pain to have to
  reset this each time.

I hunted through the maker.ini file but found
  nothing. Is there some way of setting FM to always left-align
  new graphic frames?

   

Thanks,

Heidi

--

   

Message: 11

Date: Fri, 15 Mar 2013 22:04:34 -0400

From: Rick Quatro r...@rickquatro.com

To: 'Syed Zaeem Hosain'
  syed.hos...@aeris.net, 'Alison Craig'

alison.cr...@ultrasonix.com, 'Fred Ridder'
  docu...@hotmail.com,

framers@lists.frameusers.com

Subject: RE: Cursor key navigation in tables

Message-ID:
  001701ce21ea$9f464710$ddd2d530$@com

Content-Type

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Combs, Richard 
Fred Ridder wrote:
 
 Umm, I think I indicated that in my previous message. To designate modifier
 keys in a KeySequence string:
  - Shift key is +
  - Ctrl key is ^
  - Atl key is ~
 
 AFAIK, FrameMaker does not support any use of the Windows key.

I don't know of any way to specify the Windows logo key in a KeySequence, but 
you can use /Apps to specify the Application key. For instance, my FM 7.2 
customui.cfg file (based on the original MicroType customization kit) contains 
the following shortcuts for table navigation: 

Modify MoveIPToColumnTop  KeySequence /Apps /Home 
Modify MoveIPToColumnBottom   KeySequence /Apps /End 
Modify MoveIPToPreviousCell   KeySequence /Apps /Left 
Modify MoveIPToNextCell   KeySequence /Apps /Right 
Modify MoveIPToCellAbove  KeySequence /Apps /Up 
Modify MoveIPToCellBelow  KeySequence /Apps /Down 

Note that the Application key and the key that follows are pressed in sequence 
(as indicated by the space between them). (Actually, it works if you hold the 
Application key while pressing the following key, but then you have to release 
the Application key and press it again before you can repeat the action.)

Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-903-6372
--





___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Mike Wickham 

Find the file here:
http://www.adobe.com/devnet/framemaker/online_manuals.html

This link also has a lot of FrameMaker info:
http://www.adobe.com/devnet/framemaker.html

Mike Wickham

On 3/18/2013 9:39 AM, Fred Ridder wrote:
BTW, all of this is documented in a PDF called 
CustomizingfFrameProducts.pdf that Adobe used to distribute in the 
Documentation directory of the FrameMaker installation. Unfortunately, 
this document was last updated for FrameMaker 7.0, and was no longer 
distributed with versions after 9.0.  I would hope that this file is 
still available somewhere on the Adobe website, but I suspect that may 
be over-optimistic.


-


___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Syed Zaeem Hosain (syed.hos...@aeris.net) 
The sequence posted by Rick, and modified by Fred, worked for me in FrameMaker 
11 ... I decided to use the Alt key sequence that Fred outlined, because 
CTRL-arrow and shift-arrow has other cursor positioning purposes that I use in 
FrameMaker a lot.

My thanks to Rick, Fred and Richard (and others) who made this thread be the 
_most_ useful one of this year for me! :)

Z

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Harro de Jong 
Heidi Bailey wrote:


 I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
 I
 have a configui folder (no config folder), and no customui.cfg file. Can you 
 tell me
 which of the files in there is the right one:
 
 Cmds.cfg (which I see someone has already mentioned...) Mathcmds.cfg
 Sample.cfg Wincmds.cfg
 
 Or do I need to create a config folder and a file called customui.cfg?

configui is the correct folder name. If customui.cfg doesn't exist, you can 
create it in this folder. 


 Oh, and while I'm emailing the list:
 Whenever I put a new graphic frame in (eg when doing Esc fif to place a
 screenshot), FM centers the frame. I need my graphic frames left-aligned, so 
 it is a
 pain to have to reset this each time.
 I hunted through the maker.ini file but found nothing. Is there some way of 
 setting
 FM to always left-align new graphic frames?

No. I used to use QuicKeys to change this for all frames in a book, but sadly 
that isn't officially supported under Windows 7 anymore. Some people have got 
it to work though. 

Harro de Jong
Triview
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Hi Rick,
I'd love to apply what you describe below. However, in my FM10 Fminit folder, I 
have a configui folder (no config folder), and no customui.cfg file. Can you 
tell me which of the files in there is the right one:

Cmds.cfg (which I see someone has already mentioned...)
Mathcmds.cfg
Sample.cfg
Wincmds.cfg

Or do I need to create a config folder and a file called customui.cfg?


Oh, and while I'm emailing the list:
Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
screenshot), FM centers the frame. I need my graphic frames left-aligned, so it 
is a pain to have to reset this each time.
I hunted through the maker.ini file but found nothing. Is there some way of 
setting FM to always left-align new graphic frames?

Thanks,
Heidi
--

Message: 11
Date: Fri, 15 Mar 2013 22:04:34 -0400
From: "Rick Quatro" 
To: "'Syed Zaeem Hosain'" ,  "'Alison Craig'"
,  "'Fred Ridder'" ,

Subject: RE: Cursor key navigation in tables
Message-ID: <001701ce21ea$9f464710$ddd2d530$@com>
Content-Type: text/plain;   charset="us-ascii"

Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
these lines:

>
>
>
>

Quit and restart FrameMaker. Then you should be able to navigate cells using
the arrow keys.



Technical Author
OCZ Technology Ltd
25B-25C Western Avenue
Milton Park
Abingdon
Oxfordshire
OX14 4SH
Registered in England no 7806324
Registered Address:  As Above
Tel: +44 (0) 1235 824900
Fax: +44 (0) 1235 821141
Email: hbailey at ocztechnology.com
Web: http://www.ocztechnology.com



CONFIDENTIAL COMMUNICATION:  This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law.  Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Lin Sims 
I created a customui.cfg file and put it in the fminit\configui folder
and it works perfectly. The only caveat, as I noted in a different
email, is that cursor navigation apparently no longer works in regular
text.

Bruce Foster's ImpGraph plugin did what you wanted, but with his death
it is, as far as I know, no longer available. Maybe someone has a copy
they'd be willing to give you.

On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey  
wrote:
> Hi Rick,
> I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
> I have a configui folder (no config folder), and no customui.cfg file. Can 
> you tell me which of the files in there is the right one:
>
> Cmds.cfg (which I see someone has already mentioned...)
> Mathcmds.cfg
> Sample.cfg
> Wincmds.cfg
>
> Or do I need to create a config folder and a file called customui.cfg?
>
>
> Oh, and while I'm emailing the list:
> Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
> screenshot), FM centers the frame. I need my graphic frames left-aligned, so 
> it is a pain to have to reset this each time.
> I hunted through the maker.ini file but found nothing. Is there some way of 
> setting FM to always left-align new graphic frames?
>
> Thanks,
> Heidi
> --
>
> Message: 11
> Date: Fri, 15 Mar 2013 22:04:34 -0400
> From: "Rick Quatro" 
> To: "'Syed Zaeem Hosain'" ,  "'Alison Craig'"
> ,  "'Fred Ridder'"  hotmail.com>,
> 
> Subject: RE: Cursor key navigation in tables
> Message-ID: <001701ce21ea$9f464710$ddd2d530$@com>
> Content-Type: text/plain;   charset="us-ascii"
>
> Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
> these lines:
>
> >
> >
> >
> >
>
> Quit and restart FrameMaker. Then you should be able to navigate cells using
> the arrow keys.
>
>
>
> Technical Author
> OCZ Technology Ltd
> 25B-25C Western Avenue
> Milton Park
> Abingdon
> Oxfordshire
> OX14 4SH
> Registered in England no 7806324
> Registered Address:  As Above
> Tel: +44 (0) 1235 824900
> Fax: +44 (0) 1235 821141
> Email: hbailey at ocztechnology.com
> Web: http://www.ocztechnology.com
>
>
>
> CONFIDENTIAL COMMUNICATION:  This communication including any attached 
> file(s) is CONFIDENTIAL, intended only for the named recipient (s) above and 
> contains trade secrets or other information that is exempt from disclosure 
> under applicable law.  Any use, dissemination, distribution or copying of 
> this communication and any file attachments by anyone other than the named 
> recipient (s) is strictly prohibited. If you have received this communication 
> in error, please immediately notify us by reply electronic mail and 
> permanently delete the original transmission and any attachments from your 
> computer system and any copies of this message and file attachments. Thank 
> you.
> ___
>
>
> You are currently subscribed to framers as ljsims.ML at gmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.



-- 
Lin Sims

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Mike Wickham 
I'm sure the folder name was just a typo on Rick's part. The folder is 
configui. Create a text file called customui.cfg to hold the commands.

The other files you mentioned can be edited, too, but it's best to put 
all your customizations in the customui.cfg file. FrameMaker reads it 
last, and overwrites definitions loaded from the other files. So if an 
entry doesn't work out, you can delete it and FrameMaker will return to 
default behavior without having to reenter the original values. It's 
much easier to test and make changes that way, and easier to move your 
customizations to future FM versions.

Mike Wickham

On 3/18/2013 8:40 AM, Heidi Bailey wrote:
> Hi Rick,
> I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
> I have a configui folder (no config folder), and no customui.cfg file. Can 
> you tell me which of the files in there is the right one:
>
> Cmds.cfg (which I see someone has already mentioned...)
> Mathcmds.cfg
> Sample.cfg
> Wincmds.cfg
>
> Or do I need to create a config folder and a file called customui.cfg?
>
>

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Thanks!

-Original Message-
From: Harro de Jong [mailto:harro.dej...@triviewgroup.com]
Sent: 18 March 2013 13:50
To: Heidi Bailey
Cc: framers at lists.frameusers.com
Subject: RE: Cursor key navigation in tables - and another thing (graphic frame 
placement)

Heidi Bailey wrote:


> I'd love to apply what you describe below. However, in my FM10 Fminit
> folder, I have a configui folder (no config folder), and no
> customui.cfg file. Can you tell me which of the files in there is the right 
> one:
>
> Cmds.cfg (which I see someone has already mentioned...) Mathcmds.cfg
> Sample.cfg Wincmds.cfg
>
> Or do I need to create a config folder and a file called customui.cfg?

configui is the correct folder name. If customui.cfg doesn't exist, you can 
create it in this folder.


> Oh, and while I'm emailing the list:
> Whenever I put a new graphic frame in (eg when doing Esc fif to place
> a screenshot), FM centers the frame. I need my graphic frames
> left-aligned, so it is a pain to have to reset this each time.
> I hunted through the maker.ini file but found nothing. Is there some
> way of setting FM to always left-align new graphic frames?

No. I used to use QuicKeys to change this for all frames in a book, but sadly 
that isn't officially supported under Windows 7 anymore. Some people have got 
it to work though.

Harro de Jong
Triview

CONFIDENTIAL COMMUNICATION:  This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law.  Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.

[JUNK] Re: Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Oh, odd. I missed that - not helpful!
Thanks,
Heidi

-Original Message-
From: Lin Sims [mailto:ljsims...@gmail.com]
Sent: 18 March 2013 14:02
To: Heidi Bailey
Cc: rick at rickquatro.com; framers at lists.frameusers.com
Subject: [JUNK] Re: Cursor key navigation in tables - and another thing 
(graphic frame placement)
Importance: Low

I created a customui.cfg file and put it in the fminit\configui folder and it 
works perfectly. The only caveat, as I noted in a different email, is that 
cursor navigation apparently no longer works in regular text.

Bruce Foster's ImpGraph plugin did what you wanted, but with his death it is, 
as far as I know, no longer available. Maybe someone has a copy they'd be 
willing to give you.

On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey  
wrote:
> Hi Rick,
> I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
> I have a configui folder (no config folder), and no customui.cfg file. Can 
> you tell me which of the files in there is the right one:
>
> Cmds.cfg (which I see someone has already mentioned...) Mathcmds.cfg
> Sample.cfg Wincmds.cfg
>
> Or do I need to create a config folder and a file called customui.cfg?
>
>
> Oh, and while I'm emailing the list:
> Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
> screenshot), FM centers the frame. I need my graphic frames left-aligned, so 
> it is a pain to have to reset this each time.
> I hunted through the maker.ini file but found nothing. Is there some way of 
> setting FM to always left-align new graphic frames?
>
> Thanks,
> Heidi
> --
>
> Message: 11
> Date: Fri, 15 Mar 2013 22:04:34 -0400
> From: "Rick Quatro" 
> To: "'Syed Zaeem Hosain'" ,  "'Alison Craig'"
> ,  "'Fred Ridder'"  hotmail.com>,
> 
> Subject: RE: Cursor key navigation in tables
> Message-ID: <001701ce21ea$9f464710$ddd2d530$@com>
> Content-Type: text/plain;   charset="us-ascii"
>
> Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor
> and add these lines:
>
> >  MoveIPToCellAtLeft >  > >
>
> Quit and restart FrameMaker. Then you should be able to navigate cells
> using the arrow keys.
>
>
>
> Technical Author
> OCZ Technology Ltd
> 25B-25C Western Avenue
> Milton Park
> Abingdon
> Oxfordshire
> OX14 4SH
> Registered in England no 7806324
> Registered Address:  As Above
> Tel: +44 (0) 1235 824900
> Fax: +44 (0) 1235 821141
> Email: hbailey at ocztechnology.com
> Web: http://www.ocztechnology.com
>
>
>
> CONFIDENTIAL COMMUNICATION:  This communication including any attached 
> file(s) is CONFIDENTIAL, intended only for the named recipient (s) above and 
> contains trade secrets or other information that is exempt from disclosure 
> under applicable law.  Any use, dissemination, distribution or copying of 
> this communication and any file attachments by anyone other than the named 
> recipient (s) is strictly prohibited. If you have received this communication 
> in error, please immediately notify us by reply electronic mail and 
> permanently delete the original transmission and any attachments from your 
> computer system and any copies of this message and file attachments. Thank 
> you.
> ___
>
>
> You are currently subscribed to framers as ljsims.ML at gmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/ljsims.ml%40gmail.
> com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.



--
Lin Sims

CONFIDENTIAL COMMUNICATION:  This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law.  Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Fred Ridder 

One solution to this is to define the KeySequence for navigation within a table 
to use one or more modifier keys (Shift, Ctrl, or Alt) in addition to the 
cursor keys. This change does not affect the function of the unmodified cursor 
keys in regular text. 

To specify a modifier key in a KeySequence string, just use a plus sign for 
Shift, a caret for Ctrl, or a tilde for Alt. The modifier key symbol(s) needs 
to appear at the start of the string with no space (i.e. immediately to the 
left of the slash). For example:
>
would define the keystroke combination for moving down a row in a table to be 
the Ctrl key plus the down arrow cursor key.

BTW, all of this is documented in a PDF called CustomizingfFrameProducts.pdf 
that Adobe used to distribute in the Documentation directory of the FrameMaker 
installation. Unfortunately, this document was last updated for FrameMaker 7.0, 
and was no longer distributed with versions after 9.0.  I would hope that this 
file is still available somewhere on the Adobe website, but I suspect that may 
be over-optimistic. 

-Fred Ridder

> Date: Mon, 18 Mar 2013 10:02:10 -0400
> Subject: Re: Cursor key navigation in tables - and another thing (graphic 
> frame placement)
> From: ljsims.ml at gmail.com
> To: hbailey at ocztechnology.com
> CC: framers at lists.frameusers.com
> 
> I created a customui.cfg file and put it in the fminit\configui folder
> and it works perfectly. The only caveat, as I noted in a different
> email, is that cursor navigation apparently no longer works in regular
> text.
> 
> Bruce Foster's ImpGraph plugin did what you wanted, but with his death
> it is, as far as I know, no longer available. Maybe someone has a copy
> they'd be willing to give you.
> 
> On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey  
> wrote:
> > Hi Rick,
> > I'd love to apply what you describe below. However, in my FM10 Fminit 
> > folder, I have a configui folder (no config folder), and no customui.cfg 
> > file. Can you tell me which of the files in there is the right one:
> >
> > Cmds.cfg (which I see someone has already mentioned...)
> > Mathcmds.cfg
> > Sample.cfg
> > Wincmds.cfg
> >
> > Or do I need to create a config folder and a file called customui.cfg?
> >
> >
> > Oh, and while I'm emailing the list:
> > Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
> > screenshot), FM centers the frame. I need my graphic frames left-aligned, 
> > so it is a pain to have to reset this each time.
> > I hunted through the maker.ini file but found nothing. Is there some way of 
> > setting FM to always left-align new graphic frames?
> >
> > Thanks,
> > Heidi
> > --
> >
> > Message: 11
> > Date: Fri, 15 Mar 2013 22:04:34 -0400
> > From: "Rick Quatro" 
> > To: "'Syed Zaeem Hosain'" ,  "'Alison Craig'"
> > ,  "'Fred Ridder'"  > hotmail.com>,
> > 
> > Subject: RE: Cursor key navigation in tables
> > Message-ID: <001701ce21ea$9f464710$ddd2d530$@com>
> > Content-Type: text/plain;   charset="us-ascii"
> >
> > Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
> > these lines:
> >
> > >
> > >
> > >
> > >
> >
> > Quit and restart FrameMaker. Then you should be able to navigate cells using
> > the arrow keys.




-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130318/ef72bc04/attachment.html>

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Heidi Bailey 
Thanks, I'll try this!
Cheers,
Heidi


Technical Author
OCZ Technology Ltd
25 Milton Park
Abingdon
Oxfordshire
OX14 4SH
Registered in England no 7806324
Registered Address:  As Above
Tel: +44 (0) 1235 824900
Fax: +44 (0) 1235 821141
Email: hbailey at ocztechnology.com<mailto:hbailey at ocztechnology.com>
Web: http://www.ocztechnology.com<http://www.ocztechnology.com/>

From: Fred Ridder [docu...@hotmail.com]
Sent: 18 March 2013 14:39
To: ljsims.ml at gmail.com; Heidi Bailey
Cc: framers at lists.frameusers.com
Subject: RE: Cursor key navigation in tables - and another thing (graphic frame 
placement)

One solution to this is to define the KeySequence for navigation within a table 
to use one or more modifier keys (Shift, Ctrl, or Alt) in addition to the 
cursor keys. This change does not affect the function of the unmodified cursor 
keys in regular text.

To specify a modifier key in a KeySequence string, just use a plus sign for 
Shift, a caret for Ctrl, or a tilde for Alt. The modifier key symbol(s) needs 
to appear at the start of the string with no space (i.e. immediately to the 
left of the slash). For example:
>
would define the keystroke combination for moving down a row in a table to be 
the Ctrl key plus the down arrow cursor key.

BTW, all of this is documented in a PDF called CustomizingfFrameProducts.pdf 
that Adobe used to distribute in the Documentation directory of the FrameMaker 
installation. Unfortunately, this document was last updated for FrameMaker 7.0, 
and was no longer distributed with versions after 9.0.  I would hope that this 
file is still available somewhere on the Adobe website, but I suspect that may 
be over-optimistic.

-Fred Ridder

> Date: Mon, 18 Mar 2013 10:02:10 -0400
> Subject: Re: Cursor key navigation in tables - and another thing (graphic 
> frame placement)
> From: ljsims.ml at gmail.com
> To: hbailey at ocztechnology.com
> CC: framers at lists.frameusers.com
>
> I created a customui.cfg file and put it in the fminit\configui folder
> and it works perfectly. The only caveat, as I noted in a different
> email, is that cursor navigation apparently no longer works in regular
> text.
>
> Bruce Foster's ImpGraph plugin did what you wanted, but with his death
> it is, as far as I know, no longer available. Maybe someone has a copy
> they'd be willing to give you.
>
> On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey  
> wrote:
> > Hi Rick,
> > I'd love to apply what you describe below. However, in my FM10 Fminit 
> > folder, I have a configui folder (no config folder), and no customui.cfg 
> > file. Can you tell me which of the files in there is the right one:
> >
> > Cmds.cfg (which I see someone has already mentioned...)
> > Mathcmds.cfg
> > Sample.cfg
> > Wincmds.cfg
> >
> > Or do I need to create a config folder and a file called customui.cfg?
> >
> >
> > Oh, and while I'm emailing the list:
> > Whenever I put a new graphic frame in (eg when doing Esc fif to place a 
> > screenshot), FM centers the frame. I need my graphic frames left-aligned, 
> > so it is a pain to have to reset this each time.
> > I hunted through the maker.ini file but found nothing. Is there some way of 
> > setting FM to always left-align new graphic frames?
> >
> > Thanks,
> > Heidi
> > --
> >
> > Message: 11
> > Date: Fri, 15 Mar 2013 22:04:34 -0400
> > From: "Rick Quatro" 
> > To: "'Syed Zaeem Hosain'" , "'Alison Craig'"
> > , "'Fred Ridder'" ,
> > 
> > Subject: RE: Cursor key navigation in tables
> > Message-ID: <001701ce21ea$9f464710$ddd2d530$@com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Open the FrameMaker/Fminit/Config/customui.cfg file in a text editor and add
> > these lines:
> >
> > >
> > >
> > >
> > >
> >
> > Quit and restart FrameMaker. Then you should be able to navigate cells using
> > the arrow keys.





CONFIDENTIAL COMMUNICATION: This communication including any attached file(s) 
is CONFIDENTIAL, intended only for the named recipient (s) above and contains 
trade secrets or other information that is exempt from disclosure under 
applicable law. Any use, dissemination, distribution or copying of this 
communication and any file attachments by anyone other than the named recipient 
(s) is strictly prohibited. If you have received this communication in error, 
please immediately notify us by reply electronic mail and permanently delete 
the original transmission and any attachments from your computer system and any 
copies of this message and file attachments. Thank you.
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130318/bf0c567a/attachment.html>

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Reng, Dr. Winfried 
Hi Heidi,

Do you just import the file into an anchored frame?

You can also use a dedicated table with a single cell and without
borders. The width should be that of your text column. Use a
special paragraph format, e.g. figure in this table cell to hold the
anchored frame. Press ESC m p to shrinkwrap the anchored frame to
the size of the graphic. Then the anchored frame will be set to "At
Insertion Point". If you set the alignment of your figure paragraph
format to Left, all your anchored frames will be left aligned.
Additionally a table has a table title which you can use as figure title.
Very convenient to control.

Best regards

Winfried

> Oh, and while I'm emailing the list:
> Whenever I put a new graphic frame in (eg when doing Esc fif to place a
> screenshot), FM centers the frame. I need my graphic frames left-aligned, so
> it is a pain to have to reset this each time.
> I hunted through the maker.ini file but found nothing. Is there some way of
> setting FM to always left-align new graphic frames?
>
> Thanks,
> Heidi



This e-mail contains privileged and confidential information intended for the 
use of the addressees named above. If you are not the intended recipient of 
this e-mail, you are hereby notified that you must not disseminate, copy or 
take any action in respect of any information contained in it. If you have 
received this e-mail in error, please notify the sender immediately by e-mail 
and immediately destroy this e-mail and its attachments.

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Steve Rickaby 
At 10:39 -0400 18/3/13, Fred Ridder wrote:

>BTW, all of this is documented in a PDF called CustomizingfFrameProducts.pdf 
>that Adobe used to distribute in the Documentation directory of the FrameMaker 
>installation. Unfortunately, this document was last updated for FrameMaker 
>7.0, and was no longer distributed with versions after 9.0.  I would hope that 
>this file is still available somewhere on the Adobe website, but I suspect 
>that may be over-optimistic.

I have a copy, but only the Mac version, which might not be the same.

Try this: 

-- 
Steve

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Rick Quatro 
Klaus Daube has a bunch of good materials for later versions of FrameMaker.

http://www.daube.ch/docu/fmaker00.html

There is a link towards the bottom to Customising FrameMaker 11 (also valid
for FM-9 and 10). Klaus is very thorough and generous with his information.

Rick Quatro
Carmen Publishing Inc.
585-283-5045
rick at frameexpert.com




At 10:39 -0400 18/3/13, Fred Ridder wrote:

>BTW, all of this is documented in a PDF called
CustomizingfFrameProducts.pdf that Adobe used to distribute in the
Documentation directory of the FrameMaker installation. Unfortunately, this
document was last updated for FrameMaker 7.0, and was no longer distributed
with versions after 9.0.  I would hope that this file is still available
somewhere on the Adobe website, but I suspect that may be over-optimistic.

I have a copy, but only the Mac version, which might not be the same.

Try this: 

-- 
Steve

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Shmuel Wolfson 
An HTML attachment was scrubbed...
URL:

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Fred Ridder 

Umm, I think I indicated that in my previous message. To designate modifier 
keys in a KeySequence string:
 - Shift key is +
 - Ctrl key is ^
 - Atl key is ~

AFAIK, FrameMaker does not support any use of the Windows key.

Note that when defining a KeySequence that uses a modifier key (or a 
combination of modifier keys), the modifier key(s) and the key that follows are 
pressed *in combination* rather than as a sequence of separate keystrokes. 
(Most existing KeySequence definitions start with the Esc key, which is denoted 
by \!, followed by several case-sensitive letters that are pressed in sequence.)

-Fred Ridder

Date: Mon, 18 Mar 2013 18:25:53 +0200
From: shmue...@gmail.com
To: docudoc at hotmail.com; framers at lists.frameusers.com
Subject: Re: Cursor key navigation in tables - and another thing (graphic frame 
placement)






Good idea. 



  What are the symbols for the ALT, CTRL, SHIFT and Windows Key?



  Regards,
Shmuel Wolfson
Technical Writer
052-763-7133



  On 18-Mar-13 4:39 PM, Fred Ridder wrote:





One solution to this is to define the KeySequence for navigation
within a table to use one or more modifier keys (Shift, Ctrl, or
Alt) in addition to the cursor keys. This change does not affect
the function of the unmodified cursor keys in regular text. 



To specify a modifier key in a KeySequence string, just use a
plus sign for Shift, a caret for Ctrl, or a tilde for Alt. The
modifier key symbol(s) needs to appear at the start of the
string with no space (i.e. immediately to the left of the
slash). For example:

>

would define the keystroke combination for moving down a row in
a table to be the Ctrl key plus the down arrow cursor key.



BTW, all of this is documented in a PDF called
CustomizingfFrameProducts.pdf that Adobe used to distribute in
the Documentation directory of the FrameMaker installation.
Unfortunately, this document was last updated for FrameMaker
7.0, and was no longer distributed with versions after 9.0.  I
would hope that this file is still available somewhere on the
Adobe website, but I suspect that may be over-optimistic. 



-Fred Ridder



> Date: Mon, 18 Mar 2013 10:02:10 -0400

  > Subject: Re: Cursor key navigation in tables - and
      another thing (graphic frame placement)

  > From: ljsims.ml at gmail.com

  > To: hbailey at ocztechnology.com

  > CC: framers at lists.frameusers.com

  > 

  > I created a customui.cfg file and put it in the
  fminit\configui folder

  > and it works perfectly. The only caveat, as I noted in a
  different

  > email, is that cursor navigation apparently no longer
  works in regular

  > text.

  > 

  > Bruce Foster's ImpGraph plugin did what you wanted, but
  with his death

  > it is, as far as I know, no longer available. Maybe
  someone has a copy

  > they'd be willing to give you.

  > 

  > On Mon, Mar 18, 2013 at 9:40 AM, Heidi Bailey
   wrote:

  > > Hi Rick,

  > > I'd love to apply what you describe below. However,
  in my FM10 Fminit folder, I have a configui folder (no config
  folder), and no customui.cfg file. Can you tell me which of
  the files in there is the right one:

  > >

  > > Cmds.cfg (which I see someone has already
  mentioned...)

  > > Mathcmds.cfg

  > > Sample.cfg

  > > Wincmds.cfg

  > >

  > > Or do I need to create a config folder and a file
  called customui.cfg?

  > >

  > >

  > > Oh, and while I'm emailing the list:

  > > Whenever I put a new graphic frame in (eg when doing
  Esc fif to place a screenshot), FM centers the frame. I need
  my graphic frames left-aligned, so it is a pain to have to
  reset this each time.

  > > I hunted through the maker.ini file but found
  nothing. Is there some way of setting FM to always left-align
  new graphic frames?

  > >

  > > Thanks,

  > > Heidi

  > > --

  > >

  > > Message: 11

  > > Date: Fri, 15 Mar 2013 22:04:34 -0400

  > > From: "Rick Quatro" 

  > > To: "'Syed Zaeem Hosain'"
  , "'Alison Craig'"

  > > , "'Fred Ridder'"
  ,

  > > 

  > > Subject: RE: Cursor key navigation in tables

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Combs, Richard 
Fred Ridder wrote:

> Umm, I think I indicated that in my previous message. To designate modifier
> keys in a KeySequence string:
> ?- Shift key is +
> ?- Ctrl key is ^
> ?- Atl key is ~
> 
> AFAIK, FrameMaker does not support any use of the Windows key.

I don't know of any way to specify the Windows logo key in a KeySequence, but 
you can use "/Apps" to specify the Application key. For instance, my FM 7.2 
customui.cfg file (based on the original MicroType customization kit) contains 
the following shortcuts for table navigation: 

>
>
>
>
>
>

Note that the Application key and the key that follows are pressed in sequence 
(as indicated by the space between them). (Actually, it works if you hold the 
Application key while pressing the following key, but then you have to release 
the Application key and press it again before you can repeat the action.)

Richard G. Combs
Senior Technical Writer
Polycom, Inc.
richardDOTcombs AT polycomDOTcom
303-223-5111
--
rgcombs AT gmailDOTcom
303-903-6372
--

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Mike Wickham 
Find the file here:
http://www.adobe.com/devnet/framemaker/online_manuals.html

This link also has a lot of FrameMaker info:
http://www.adobe.com/devnet/framemaker.html

Mike Wickham

On 3/18/2013 9:39 AM, Fred Ridder wrote:
> BTW, all of this is documented in a PDF called 
> CustomizingfFrameProducts.pdf that Adobe used to distribute in the 
> Documentation directory of the FrameMaker installation. Unfortunately, 
> this document was last updated for FrameMaker 7.0, and was no longer 
> distributed with versions after 9.0.  I would hope that this file is 
> still available somewhere on the Adobe website, but I suspect that may 
> be over-optimistic.
>
> -

-- next part --
An HTML attachment was scrubbed...
URL:

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Matt Sullivan 
Here's the documentation link I referred to in my book:
http://www.adobe.com/support/documentation/en/framemaker/

It has a few dozen manuals and reference PDF's, and appears to contain files 
not in the other 2 links

-Matt

Matt R. Sullivan 
co-author Publishing Fundamentals: Unstructured FrameMaker 11 
P: 714.960.6840 | C: 714.585.2335 | matt at mattrsullivan.com 

@mattrsullivan LinkedIn facebook mattrsullivan.com 

On Mar 18, 2013, at 10:42 AM, Mike Wickham  wrote:

> Find the file here:
> http://www.adobe.com/devnet/framemaker/online_manuals.html
> 
> This link also has a lot of FrameMaker info:
> http://www.adobe.com/devnet/framemaker.html
> 
> Mike Wickham
> 
> On 3/18/2013 9:39 AM, Fred Ridder wrote:
>> BTW, all of this is documented in a PDF called CustomizingfFrameProducts.pdf 
>> that Adobe used to distribute in the Documentation directory of the 
>> FrameMaker installation. Unfortunately, this document was last updated for 
>> FrameMaker 7.0, and was no longer distributed with versions after 9.0.  I 
>> would hope that this file is still available somewhere on the Adobe website, 
>> but I suspect that may be over-optimistic. 
>> 
>> -
> 
> ___
> 
> 
> You are currently subscribed to framers as matt at mattrsullivan.com.
> 
> Send list messages to framers at lists.frameusers.com.
> 
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.com
> 
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.

-- next part --
An HTML attachment was scrubbed...
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: twitter.png
Type: image/png
Size: 1331 bytes
Desc: not available
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: linkedin.png
Type: image/png
Size: 1380 bytes
Desc: not available
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: facebook.png
Type: image/png
Size: 1576 bytes
Desc: not available
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: blog.png
Type: image/png
Size: 1222 bytes
Desc: not available
URL:

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Syed Zaeem Hosain (syed.hos...@aeris.net) 
The sequence posted by Rick, and modified by Fred, worked for me in FrameMaker 
11 ... I decided to use the Alt key sequence that Fred outlined, because 
CTRL-arrow and shift-arrow has other cursor positioning purposes that I use in 
FrameMaker a lot.

My thanks to Rick, Fred and Richard (and others) who made this thread be the 
_most_ useful one of this year for me! :)

Z

Cursor key navigation in tables - and another thing (graphic frame placement)

2013-03-18 Thread Harro de Jong 
Heidi Bailey wrote:


> I'd love to apply what you describe below. However, in my FM10 Fminit folder, 
> I
> have a configui folder (no config folder), and no customui.cfg file. Can you 
> tell me
> which of the files in there is the right one:
> 
> Cmds.cfg (which I see someone has already mentioned...) Mathcmds.cfg
> Sample.cfg Wincmds.cfg
> 
> Or do I need to create a config folder and a file called customui.cfg?

configui is the correct folder name. If customui.cfg doesn't exist, you can 
create it in this folder. 


> Oh, and while I'm emailing the list:
> Whenever I put a new graphic frame in (eg when doing Esc fif to place a
> screenshot), FM centers the frame. I need my graphic frames left-aligned, so 
> it is a
> pain to have to reset this each time.
> I hunted through the maker.ini file but found nothing. Is there some way of 
> setting
> FM to always left-align new graphic frames?

No. I used to use QuicKeys to change this for all frames in a book, but sadly 
that isn't officially supported under Windows 7 anymore. Some people have got 
it to work though. 

Harro de Jong
Triview