Re: [Frameworks] Cine-Kodak Special II

2018-12-12 Thread Francisco Torres
cine Kodak special - guts http://www.cinematography.com/index.php?showtopic=57160 2018-12-11 22:20 GMT-04:00, Dave Tetzlaff : > If the camera sat for a long time with the spring wound, you might be in > trouble, as that causes the spring to lose force. > > What you’re hoping is that the spring is

Re: [Frameworks] Cine-Kodak Special II

2018-12-11 Thread Dave Tetzlaff
If the camera sat for a long time with the spring wound, you might be in trouble, as that causes the spring to lose force. What you’re hoping is that the spring is OK, and the rest of the mechanism is just gummed up from sitting. In which case you may only need a clean and lube to get it

Re: [Frameworks] Cine-Kodak Special II

2018-12-11 Thread Morgan Hoyle-Combs
This is actually good information for me to read along with. I have been shooting with a Cine Kodak for most of my projects for a good 2-3 years now. I have had no problems with the mechanisms or spring drive in the past, but recently I have felt something going on wth my spring drive. Almost

Re: [Frameworks] Cine-Kodak Special II

2018-12-11 Thread Scott Dorsey
The camera only runs a few seconds because everything in it is gunked up and it needs cleaning and lubrication, likely. Don't EVER run an old camera or projector without making sure the movement is properly lubricated, because you can wear out the cam very very quickly without proper lubrication.

Re: [Frameworks] Cine-Kodak Special II

2018-12-11 Thread Francisco Torres
the camera only runs a few seconds— most of the time. so sometimes it does not run at all? 2018-12-10 23:16 GMT-04:00, Matt Shaw : > Hey frameworkers, > > Does anyone know of a place that works on Kodaks? I’ve got a Cine Special II > (16mm) with a faulty motor and am new to the scene. The camera

Re: [Frameworks] Cine-Kodak Special II

2018-12-10 Thread Ed Inman
Sounds like a broken spring--like in a wind-up clock. -Original Message- From: Matt Shaw Sent: Dec 10, 2018 9:16 PM To: frameworks@jonasmekasfilms.com Subject: [Frameworks] Cine-Kodak Special II Hey frameworkers,Does anyone know of a place that works on Kodaks? I’ve got a Cine Special II

[Frameworks] Cine-Kodak Special II

2018-12-10 Thread Matt Shaw
Hey frameworkers, Does anyone know of a place that works on Kodaks? I’ve got a Cine Special II (16mm) with a faulty motor and am new to the scene. The camera sat for an unknown period of time before I started using it. After winding the motor until the bell rings, the camera only runs a few