e.
>
Same here. Last night was okay. It started about 5 days ago. If you just
start over it usually finishes okay.
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
I have used Hedricks patches and nagged him about problems
but the only remaining issue is fsck. It works perfectly with the PIIX
controller. Benchmarks sizzle with the Maxtor/Highpoint almost 24MB/sec
so the tradeoff is acceptable(to me). The best the IBM could muster was
20MB/sec. The Maxtor/P
] at ata2-master using UDMA66
>
> It works fine on UDMA33.
>
> I notice that you have ad2 and ad3 running in UDMA66 mode. I didn't
> realise this was possible; I'll experiment.
>
If you shut off the PIIX contoller in the BIOS the Highpoint uses ad0-3
if not it uses ad4
ever
seeing quality, price and performance like we do now. The same goes for
several brands of motherboards too. This has to be the PC's golden age.
Look at memory prices and quality. 1GB of PC133 can be had for under
$900 and again with the assurance that a failure would be pretty rare.
Regards,
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Trent Nelson wrote:
>
> Ted Sikora wrote:
>
> > Your right the addresses seem to be standard machine resources. Are you
> > using SMP? The irq's are remapped on a SMP machine so maybe that's were
> > the trouble lies? The PNP tag is what has me stumped.
Trent Nelson wrote:
>
> Ted Sikora wrote:
> >
> > I have been getting these messages from my kernel for some time now.
> > Could the culprit be these 2 isa cards:
> > non-pnp SB16 sbc0
> > ne2000 ed0
> > They are on a SMP BP6
>
> I've
kernel: unknown: can't assign
resources
May 3 14:53:19 telecast /kernel: unknown: can't assign
resources
May 3 14:53:19 telecast /kernel: unknown: can't assign
resources
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "
Kenneth Wayne Culver wrote:
>
> Hmm, I don't know then, I'm using that ViBRA 16X which seems to cause
> problems a lot.
>
> >
> On Sun, 30 Apr 2000, Ted Sikora wrote:
>
> > Kenneth Wayne Culver wrote:
> > >
> > > I guess it depen
RENT.
>
>
I did a make build/installworld and kernel this afternoon after I
cvsup'd(current). I have an original non-pnp SB16.
(Best sounding sound card on the market IMOP) Aureal and any ESS equiped
cards are excellent too.
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECT
Ted Sikora wrote:
>
> VINSON WAYNE HOWARD wrote:
> >
> > Ok, I checked, and vmstat shows cpu usage to be quite normal, about 6%
> > while playing. What's up w/ top?
> >
>
> Xmms on my SMP current machine: top shows 40 to 43% system
> vmstat shows 1
VINSON WAYNE HOWARD wrote:
>
> Ok, I checked, and vmstat shows cpu usage to be quite normal, about 6%
> while playing. What's up w/ top?
>
Xmms on my SMP current machine: top shows 40 to 43% system
vmstat shows 10 to 11%
--
Ted Sikora
Jtl Development Group
[EMAI
"Chris D. Faulhaber" wrote:
>
> On Tue, 18 Apr 2000, Ted Sikora wrote:
>
> > After building a new kernel yesterday after a cvsup the following
> > appeared.
> >
> > Apr 17 23:07:42 telecast /kernel: WARNING: run /dev/MAKEDEV before
> > 2000-06-0
After building a new kernel yesterday after a cvsup the following
appeared.
Apr 17 23:07:42 telecast /kernel: WARNING: run /dev/MAKEDEV before
2000-06-01 to get rid of block devices
I did a MAKEDEV all and the message still persists.
Regards,
--
Ted Sikora
Jtl Development Group
[EMAIL
nel: APIC_IO: routing 8254 via IOAPIC #0
intpin 2
Apr 17 23:07:42 telecast /kernel: SMP: AP CPU #1 Launched!
Regards,
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
of applied to an incomplete type
kget.c:85: dereferencing pointer to incomplete type
kget.c:86: dereferencing pointer to incomplete type
kget.c:89: dereferencing pointer to incomplete type
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
http://powerusersbbs.com
To Unsubscribe: send mail to [EMAIL PR
Kris Kennaway wrote:
>
> On Fri, 17 Mar 2000, Ted Sikora wrote:
>
> > Most of the plugins give the 'bad magic' error. It works perfectly under
> > the Linux-Netscape version however. That's why I run both in FreeBSD.
> > With the Linux version I get a
lthough not as a Netscape plugin -- it dumps core & I haven't had a
> chance to see why yet.
> --
Most of the plugins give the 'bad magic' error. It works perfectly under
the Linux-Netscape version however. That's why I run both in FreeBSD.
With the Linux vers
Ted Sikora wrote:
>
> Donn Miller wrote:
> >
> > Anyone get this beast to work on -current? The audio works, but the video
> > doesn't work at all. I have COMPAT_LINUX in my kernel, and RealPlayer 5.0
> > works pretty well.
> >
> > $ printenv LD_
ath and export
REALPLAYER7=/usr/compat/linux/usr/local/RealPlayer7 in /etc/profile.
For the mimeinstall and plugins go to the RealPlayer /dir and run
#./mimeinstall.sh
#./pluginstall.sh
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
http://powerusersbbs.com
To Unsubscribe: send mail to [EM
Does anyone know what they are now or will be? I want to follow
4.0-stable if there will be one. Right now I have been cvsup'ing
from 4.0-RC to 5.0-current. I am assuming there will be:
3-stable
4-stable
5-current
Yes, no, maybe? Will 4.0-RELEASE turn into the 4-stable branch?
--
Ted S
Andrey Sverdlichenko wrote:
>
> On Tue, 14 Mar 2000, Ted Sikora wrote:
>
> > XFree86-Bigfont extension: shmat() failed, size = 4096, errno = 24
>
> options SHMALL=1025
> options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
> options SHMM
XFree86-Bigfont extension: shmat() failed, size = 4096, errno = 24
Any ideas on a fix. Xfree86-4.0 is solid otherwise.
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
http://powerusersbbs.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" i
Ted Sikora wrote:
>
> My problem is a little different. XFree86-4.0 loads
> fine looks great but the mouse does not work. There
> are no errors. I tried PS/2 , serial, etc same with
> them all. The pointer appears then moves to the upper
> right and dissappers. I tried movin
?
Note:XF86Config works well but
XFree86 -configure gives a bad config
Regards,
--
Ted Sikora
Jtl Development Group
[EMAIL PROTECTED]
http://powerusersbbs.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
24 matches
Mail list logo
