I am attempting to configure sendmail to pass mail addressed to a particular
domain to maildrop.
maildrop is already installed and used with getmail to collect mail from a
number of pop accounts. It has been installed as user:vmail group:vmail.
This existing setup works fine.
I've added the
On Thu, Dec 25, 2003 at 01:28:12AM +0200, Alexander wrote:
did someone make identd work on 4.9-STABLE in jailed environment ?
Don't see why it should cause any particular difficulties. You'll
need to run an instance of inetd(8) in each jail where you want ident
capability. All of those
Hello. I have been using the vi that comes with FreeBSD for more than a
year. I now can manage to use lots of vi features except the tag mode which
I don't know clear about its concept (perhaps because of my bad English).
Now I think vi is not sufficient. I hate to type !perl % each time I edit
+++ Chris [freebsd] [24-12-03 20:17 -0600]:
| Happy Holidays folks!
|
| Is there a way to tie in a visual mail notifier in KMail? Sorta like how
| Outlook shows the envelope under Windows.
|
| Thanks in advance, stay safe, semi-sober and enjoy the holidays.
| --
| Best regards,
|
|
Hello,
you seem to not have tried this under 4.9 or not under jail.
In the host environment I haven't run anything else but sshd which is
bound to listen on the IP != jail environment. In the jail environment
it's not possible to bind on IP outside the jail. After googling a little
I found that
I installed MRTG and got it working. Noticed that it seemed it was not polling on
its own. So I changed the cron job to make it poll more often and in fact its not
polling on its own.
Also noticed that I stopped receiving my Dailey, reports via email.. I'm also
trouble shooting a send mail
On Thursday 25 December 2003 03:18 am, Shantanoo Mahajan wrote:
+++ Chris [freebsd] [24-12-03 20:17 -0600]:
| Happy Holidays folks!
|
| Is there a way to tie in a visual mail notifier in KMail? Sorta like how
| Outlook shows the envelope under Windows.
Open KMail, Settings, Configure
I'm attempting to install gaim-0.73 on my 5.2 RC-1 system. However, it's
got some older dependency requirements such as:
desk# pkg_add -r gaim
Fetching
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-current/Latest/gaim.tbz...
Done.
Fetching
Thanks very much for the suggestion! Unfortunately it didn't make any
difference at all to the probe.
Any other suggestions?
Anyone else?
Sean
-Original Message-
From: fbsd_user [EMAIL PROTECTED]
Sent: Dec
On Thu, 25 Dec 2003 12:47, Chris wrote:
Happy Holidays folks!
Is there a way to tie in a visual mail notifier in KMail? Sorta like how
Outlook shows the envelope under Windows.
KMail can only notify if it is running.
I run fetchmail in daemon mode to transfer any POP mail from my ISP
Hi Everybody ,
I can't install FreeBSD on my Dual Computer ..
When I boot the computer for install FreeBSD from 5.0 CD it stopped
on TimeCounter ACPI-SAFE frequency 3579545 line ...
After That I try to install from 5.1 CD it stopped on same line ...
But I
Hi Everybody ,
I have two question about SMP .
First Why FreeBSD is installing OS with single Cpu default ?!! Why
it can't enable SMP support at installation time ?!
Second when I compile kernel with SMP Support FreeBSD 4.9 can find
second CPU ?! What do I have to
shawn wrote:
I installed MRTG and got it working. Noticed that it seemed it was not polling on its own. So I changed the cron job to make it poll more often and in fact its not polling on its own.
Also noticed that I stopped receiving my Dailey, reports via email.. I'm also trouble shooting a
Answer to your ? 1. 98% of FBSD users do not have 2 cpu
motherboards so default GENERIC kernel is configured for them and
not for you.
Answer to your ? 2. Read through the LINT kernel source to see if
you missed some other kernel option needed to enable the kind of 2
cpu motherboard you have.
Say I would like to upgrade all installed packages. I already found
out that I can do portversion -c which spits out a shell script
which does this.
But since it takes a long time, so I'd like to let it run over night.
It seems that it can ask me a question from time to time, if the port
likes
/etc/crontab 86%# /etc/crontab - root's crontab for FreeBSD
#
# $FreeBSD: src/etc/crontab,v 1.21.2.3 2000/12/08 10:56:07 obrien Exp $
#
SHELL=/bin/sh
PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin
HOME=/var/log
#
#minute hourmdaymonth wdaywho command
#
*/1 *
shawn wrote:
*snip*
1,310-5 * * * rootadjkerntz -a
*/1 * * * * /usr/local/bin/mrtg
/usr/local/etc/mrtg/mrtg.cfg
Part of your problem is going to be right here. comparing two lines,
you will notice the the 6th field is the user to
What ever you do, upgrade portupgrade and its dependancies first. The
current
version will fix most bad situations that you would have had to delete
packages and re-add them before. You may still have to do that because
you
have a corrupted setup.
Many thanks I think it's improving! The origin
Hi List, (and where/when appropriate, Seasons Greetings!):
I'm having problems installing 4.9 release on a thinkpad 390x. I can get it
to boot, but it stalls at this point:
#
ppc0: Parralel port at port 0x378-0x37f irq 7 on isa0
ppc0: Generic Chipset (EPP/NIBBLE) in COMPATIBLE MODE
plip0: PLIP
Hi ,
I checked LINT it said that I have to disabke I386 AND I486 from
kernel .. I marked those values from GENERIC and LINT too and recompile it .
But I can't see any changes
Then I checked my messages file
Dec 25 20:30:33 freebsdcgp /kernel: FreeBSD/SMP: Multiprocessor
On Thu, Dec 25, 2003 at 04:59:05PM +0100, Kai Grossjohann wrote:
The holy grail, of course, would be that I invoke some command which
asks me all questions and stores the answers somewhere, then invoke
another command which actually builds and installs the ports. I could
then do the
Hi everyone and Merry Christmas!
I have the following problem: after moving cucipop popper daemon to
FreeBSD 4.9 from 4.5, the popper often terminates with a SIGPIPE, even if
the client resides on the same server. It never occured on FreeBSD 4.5. It
seems as though the tcp connection breaks
Hi ,
I'm using FreeBSD 4.9 . Does top utility have problem about showing
dual CPU output ... But I can see CPU0 AND CPU1 on STATE column When I
make something for example compiling something ... !?!!
Vahric
___
[EMAIL
On Thu, Dec 25, 2003 at 07:04:30PM +0200, Vahric MUHTARYAN wrote:
Hi ,
I'm using FreeBSD 4.9 . Does top utility have problem about showing
dual CPU output ... But I can see CPU0 AND CPU1 on STATE column When I
make something for example compiling something ... !?!!
What were
- Original Message -
From: Vahric MUHTARYAN [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 25, 2003 11:04 AM
Subject: top -- and dual cpu quesitons ...
Hi ,
I'm using FreeBSD 4.9 . Does top utility have problem about showing
dual CPU output ... But I can see CPU0
Ok ..
I expecting to see two processor. Because in Linux and SCO I can see two CPU
output like this ...
7:22pm up 8 days, 23:32, 1 user, load average: 0.01, 0.02, 0.00
180 processes: 179 sleeping, 1 running, 0 zombie, 0 stopped
CPU0 states: 0.0% user, 0.0% system, 0.0% nice, 100.0%
On Thursday 25 December 2003 08:25 am, [EMAIL PROTECTED] wrote:
What ever you do, upgrade portupgrade and its dependancies first. The
current
version will fix most bad situations that you would have had to delete
packages and re-add them before. You may still have to do that because
you
usr comes
imo from users and isnt users/home quite logic place?
Doesn't /usr come from Unix(R) System Resources ?
--
Toomas Aas | [EMAIL PROTECTED] | http://www.raad.tartu.ee/~toomas/
* Atheism is a non-prophet organization.
___
[EMAIL PROTECTED]
Hi Everybody ,
I want to stop SENDMAIL and I configure SENDMAIL option NO in
rc.conf but it's still running ... Does another startup script than rc.conf
to stop SENDMAIL ...
Or if you say it's piece of the base system I think I have to
unmark #NO_SENDMAIL= true# do not
Hi!
Can't mount Apacer USB Flash drive in FreeBSD 4.8.
When I do:
mount -t msdos /dev/da0s1 /mnt
I get:
msdos: /dev/da0s1: Input/output error
When you plug in the drive, is it recognized by the OS? It should print
some lines to the console and to /var/log/messages.
Also, some USB
Zhang Weiwu wrote:
[ ... ]
Should I advance to vim right now or emacs, or is it that I didn't dig
into vi deep enough to release its full power? I wonder how many
programmers are still using 4BSD vi (compare to enchanced vi's)? Maybe
none? Maybe many?
There are reasonable people who use
You true off sendmail totally in rc.conf with
sendmail_enable=NONE
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Vahric
MUHTARYAN
Sent: Thursday, December 25, 2003 12:52 PM
To: [EMAIL PROTECTED]
Subject: SENDMAIL
Hi Everybody ,
I want to
I acquired a SuperMicro dual slot one board a while ago (http://
www.supermicro.com/PRODUCT/MotherBoards/840/PIIIDME.htm),
and was running a single PIII 450 in there for about a month.
The system worked great.
I decided to move to using dual processors, so I acquired 2 PIII 667 cpus.
(According
On Thu, 25 Dec 2003 11:27:50 -0500
Eric Pogroski [EMAIL PROTECTED] wrote:
Hi List, (and where/when appropriate, Seasons Greetings!):
I'm having problems installing 4.9 release on a thinkpad 390x. I can get it
to boot, but it stalls at this point:
#
ppc0: Parralel port at port 0x378-0x37f
I am using FreeBSD 4.8 with Mutt 1.5 and Procmail 3.22 and have setup
some filters. In my .procmailrc I have the following
:0: * [EMAIL PROTECTED] FreeBSD_Questions :0: * ^TO_questions
FreeBSD_Questions
:0: * .* Default
And in my .muttrc file I have the following
subscribe freebsd-questions
On Thu, Dec 25, 2003 at 03:43:01PM -0600, Bryan Cassidy wrote:
I am using FreeBSD 4.8 with Mutt 1.5 and Procmail 3.22 and have setup
some filters. In my .procmailrc I have the following
:0: * [EMAIL PROTECTED] FreeBSD_Questions :0: *
^TO_questions FreeBSD_Questions
That must read:
:0:
*
Hi,
I had the same problem sorting the eMails from
[EMAIL PROTECTED]
Bryan Cassidy [EMAIL PROTECTED] wrote:
I am using FreeBSD 4.8 with Mutt 1.5 and Procmail 3.22 and have setup
some filters. In my .procmailrc I have the following
:0: * [EMAIL PROTECTED] FreeBSD_Questions :0: *
What is the sure fired way to get the correct spelling of the
package name to use with pkg_add -r command?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
fbsd_user wrote:
What is the sure fired way to get the correct spelling of the
package name to use with pkg_add -r command?
pkg_info | grep start.of.package.name
i.e.
# pkg_info | grep emacs
xemacs-21.4.14 This port tracks the...
xemacs-packages-10.0 Basic...
*snips not included*
hope
Jonathan T. Sage wrote:
fbsd_user wrote:
What is the sure fired way to get the correct spelling of the package
name to use with pkg_add -r command?
pkg_info | grep start.of.package.name
i.e.
# pkg_info | grep emacs
xemacs-21.4.14 This port tracks the...
xemacs-packages-10.0 Basic...
Nope, sorry that will only get the name of installed ports and
packages on your system.
May be the readers missed the -r flag which means to fetch package
from the FBSD FTP site.
The FBSD online web site provides two aides to help in finding
names.
An category index with search capability into
On Wednesday, 24 December 2003 at 13:40:17 +0100, [EMAIL PROTECTED] wrote:
Well, I realy need help with this ...
I had 2 volumes on my system. I have two identical 30Gb
hard disk, I made one 25G, and a 3G partiton both, and
created a 25G mirror volume, and a 6Gig concatenated
volume (used as
I've recently installed a new machine with FreeBSD 5.2-RC2. This box is
equipped with removable drive trays, a Promise SATA RAID controller, and
PATA/SATA controllers on the motherboard.
ATA_STATIC_ID is enabled in the kernel so that disks names don't flip
around when I remove a drive or insert
Hi,
I've installed FreeBSD 4.9 via FTP on my T22-laptop
while having the hard disk as my first disk on it
and then I had to put that disk into the ultrabay
and thus have made it the second disk.
I know, that all I have to do is probably to edit
the /etc/fstab but I can't get there - I'm stuck
at
Vahric MUHTARYAN [EMAIL PROTECTED] writes:
I want to stop SENDMAIL and I configure SENDMAIL option NO in
rc.conf but it's still running ... Does another startup script than rc.conf
to stop SENDMAIL ...
According to the manual,
sendmail_enable
(str) If set to ``YES'',
On Thu, 25 Dec 2003 18:54:26 +0200
"Vahric MUHTARYAN" [EMAIL PROTECTED] wrote:
Hi ,
I checked LINT it said that I have to disabke I386 AND I486 from
kernel .. I marked those values from GENERIC and LINT too and recompile it .
But I can't see any changes
Zhang Weiwu [EMAIL PROTECTED] writes:
Should I advance to vim right now or emacs, or is it that I didn't dig
into vi deep enough to release its full power? I wonder how many
programmers are still using 4BSD vi (compare to enchanced vi's)? Maybe
none? Maybe many?
The vi in FreeBSD's base
High all, I would just like to know if anyone has wine installed and can
play shadowbane and some blizzard games. I'm trying to quit dual
booting(and crashing in win98). I can't find any info anywhere on
shadowbane, but I read where starcraft works well, but has no fonts on
bnet. Any info
Is there an official way to fix an MBR that has been overwritten such
that there is still a valid partition table and valid MBR, but not the
one you want?
Like usual upon inserting a Windows CD and booting off it my MBR was
changed to that of the operating system for the CD; leaving me unable to
- Original Message -
From: "horio shoichi" [EMAIL PROTECTED]
To: "Vahric MUHTARYAN" [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Thursday, December 25, 2003 7:32 PM
Subject: Re: FreeBSD 4.9 Can't find second CPU ...
On Thu, 25 Dec 2003
W. Sierke wrote:
I am attempting to configure sendmail to pass mail addressed to a
particular
domain to maildrop.
...
I've added the following to the sendmail configuration:
in /etc/mail/virtusertable
...
@second.domain.tldsecond-domain-tld
and in /etc/mail/aliases
...
hey, i'd like to ask.. how do i make the ip's for Mirc cuz i've bEen noticing that
quite a number of the chatters using the ip from freebsd.com.. hope u can tell me how
to do it? thanks
___
[EMAIL PROTECTED] mailing list
W. Sierke wrote:
I am attempting to configure sendmail to pass mail addressed to a
particular
domain to maildrop.
...
I've added the following to the sendmail configuration:
in /etc/mail/virtusertable
...
@second.domain.tldsecond-domain-tld
and in /etc/mail/aliases
...
I am trying to install 5.1 and it installs fine until I try to set up X.
I know the exact video card and monitor details, the video card is even
on the list of drivers - Cirrus Logic GLGD5446. No matter what I choose
in the setup screens it always fails. Is there something wrong with the
X
Dec 25 20:30:33 freebsdcgp /kernel: SMP: AP CPU #1 Launched!
The second cpu is going as stated above as opposed to the first cpu #0
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Strangest thing, even though X failed during the initial setup during
the initial install of 5.1, after booting into BSD I decided to try a
startx anyway, and guess what - it works! What a deal!
--
Chip
Chip Wiegand wrote:
I am trying to install 5.1 and it installs fine until I try to set up
On Fri, 26 Dec 2003 12:45 am, Vahric MUHTARYAN wrote:
Hi Everybody ,
I can't install FreeBSD on my Dual Computer ..
When I boot the computer for install FreeBSD from 5.0 CD it stopped
on TimeCounter ACPI-SAFE frequency 3579545 line ...
After That I try to install from
On Thu, Dec 25, 2003 at 08:43:30AM -0500, Trey Sizemore wrote:
I assume i can force the install with the -f flag, but I wanted to know
if there are any ramifications to doing this on future updates or to
future program installs?
You don't have to force anything because they're warnings, not
Hello Sir !
Sir i facing some silly problems , problems are ::
1. Where does source code of NIC driver lies on my freebsd 4.7 kernel ?
2. Can you please provide me some examples of implementing netgraph
nodes ( if possible send some helpful links also )
Please reply soon...
59 matches
Mail list logo
