Hi,
is it possible to have a different password for local (console, xdm) and
remote (ssh) logins?
I have a separate password database for my imap-server (dovecot), and I
was wondering whether this is possible with OpenSSH, too.
GH
___
[EMAIL PROTECTED]
Vonleigh Simmons [EMAIL PROTECTED] was heard to say:
After updating to 5.3 MySQL won't start at boot time. I read UPDATING
and it says to include a line in /etc/rc.conf. But even after adding
that line:
# grep mysql /etc/rc.conf
mysql_enable=YES
It still won't start up on its
On Wed, 8 Dec 2004 04:38, Lucas Holt wrote:
Just an fyi, the ffmpeg port is not building propery for two possible
reasons. First, several of the html documents are not found and make
dies. Second, if you ran the install once and it failed, it created a
symlink in /usr/local/lib/ for a
On Wed, Dec 08, 2004 at 07:26:22PM +1100, Alastair G. Hogge wrote:
On Wed, 8 Dec 2004 04:38, Lucas Holt wrote:
Just an fyi, the ffmpeg port is not building propery for two possible
reasons. First, several of the html documents are not found and make
dies. Second, if you ran the install
orville weyrich wrote:
I cannot find instructions in the official
documentation, nor in the FreeBSD Dairy.
Have you read this:
http://www.vinumvm.org/vinum/replacing-drive.html
I've followed these steps to successfully recover from two cases of
drive failure.
On Tuesday, December 07, 2004 9:59:53 PM stheg olloydson [EMAIL PROTECTED]
wrote:
|it was said:
|
|I continually receive an error message about a bad host name. This is
|the error message:
|
|Starting cron
|Local package initialization: printerDec 7 21:20:44 [EMAIL PROTECTED]
|lpd[438]:
In the last episode (Dec 07), Vonleigh Simmons said:
After updating to 5.3 I'm running into the following, I'm
getting the following error in my mail log over and over:
usr/local/libexec/mlock[755]: (64) not setgid mail
I'm assuming it's an ownership problem, but what of?
mlock
After updating to 5.3 MySQL won't start at boot time. I read UPDATING
and it says to include a line in /etc/rc.conf. But even after adding
that line:
# grep mysql /etc/rc.conf
mysql_enable=YES
It still won't start up on its own after I reboot. However doing:
I'm sitting in front of
On Tue, Dec 07, 2004 at 09:45:51PM -0800, orville weyrich wrote:
I have been trying to figure out how to get VINUM to
recognize a new disk after a disk failure, and no luck
at all.
I cannot find instructions in the official
documentation, nor in the FreeBSD Dairy.
Lots of places tell how
Edit /etc/hosts add internal ip and host fro example if hostname is
till.fool.net
ip till till.fool.net
* Gerard Seibert ([EMAIL PROTECTED]) wrote:
I continually receive an error message about a bad host name. This is the
error message:
Starting cron
Local package initialization:
Create the iso via mkisofs use burncd or growisofs to burn the dvd.
* RW ([EMAIL PROTECTED]) wrote:
I've been trying to burn a single large file (a 4.2 GB encrypted gbde
filesystem within a file) to a DVD, but mkisofs tells me the file is too
large.
I looked on Google and found that
Scott, your procedure is what I have used, except for:
On Wed, Dec 08, 2004 at 10:09:05AM +, Scott Mitchell wrote:
6. Tell vinum to restart the failed subdisk:
# vinum start raid.p0.s0
7. Wait ages while the new disk is 'revived'.
I was quite impressed that the volume remained
After I cvsup'd and recompiling my kernel, it came up with this error,
anyone has an idea on how to fix this?
--
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions
-ansi -nostdinc -I- -I.
On Wed, Dec 08, 2004 at 11:52:55AM +0100, Stijn Hoop wrote:
Scott, your procedure is what I have used, except for:
On Wed, Dec 08, 2004 at 10:09:05AM +, Scott Mitchell wrote:
6. Tell vinum to restart the failed subdisk:
# vinum start raid.p0.s0
7. Wait ages while the new
After I cvsup'd and recompiling my kernel, it came up with this error,
anyone has an idea on how to fix this?
--
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions
-ansi -nostdinc -I- -I.
On Wed, Dec 08, 2004 at 11:30:13AM +, Scott Mitchell wrote:
On Wed, Dec 08, 2004 at 11:52:55AM +0100, Stijn Hoop wrote:
I was quite impressed that the volume remained available with users
accessing it throughout this procedure :-)
Yes I was too -- however I wasn't as impressed with
Hi Geert,
Couldn't you just login remotely as someone different, and then (if needed),
su to the correct user?
That's what I do.
Cheers,
Paul Hamilton
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Geert Hendrickx
Sent: Wednesday, 8 December 2004
On 2004-12-08 19:11, Spades [EMAIL PROTECTED] wrote:
After I cvsup'd and recompiling my kernel, it came up with this error,
anyone has an idea on how to fix this?
--
{standard input}: cc: Assembler messages:
Internal compiler error: program cc1 got fatal signal 11{standard
input}:1997:
Paul Hamilton wrote:
Hi Geert,
Couldn't you just login remotely as someone different, and then (if needed),
su to the correct user?
That's what I do.
Cheers,
Paul Hamilton
Good idea -- then I would only allow a user called remote in, via
AllowUsers or AllowGroups in /etc/ssh/sshd_config.
But this
On Wed, Dec 08, 2004 at 12:34:27PM +0100, Stijn Hoop wrote:
On Wed, Dec 08, 2004 at 11:30:13AM +, Scott Mitchell wrote:
On Wed, Dec 08, 2004 at 11:52:55AM +0100, Stijn Hoop wrote:
AFAIK the only way to guarantee a consistent rebuild is to do it offline
(at
least in 4.x, haven't
On Wed, Dec 08, 2004 at 11:54:45AM +, Scott Mitchell wrote:
On Wed, Dec 08, 2004 at 12:34:27PM +0100, Stijn Hoop wrote:
I'm just saying that in my case it didn't work out well. As with any other
advice, it might just work for you :)
Sure, I'm definitely not disagreeing with anything
Anita Hicklin wrote:
I was wondering if I could get instructions on how to uninstall free
bsd. It's on my computer and I dont' know how to use it so I was going
to just unistall it but I can't seem to figure it out.
Operating systems unlike other programs, you don't really uninstall -
you
On Wed, Dec 08, 2004 at 01:01:30PM +0100, Stijn Hoop wrote:
On Wed, Dec 08, 2004 at 11:54:45AM +, Scott Mitchell wrote:
On Wed, Dec 08, 2004 at 12:34:27PM +0100, Stijn Hoop wrote:
I'm just saying that in my case it didn't work out well. As with any other
advice, it might just work for
Hi,
I have a PII PC running 5.3. The output of 'dmesg' has a line:
atapci0: VIA 82C596B UDMA66 controller [...] at device 7.1 on pci0
And at the end, it says:
ad0: 43979MB IBM-DTLA-307045/TX6OA50C [89355/16/63] at ata0-master PIO4
acd0: CDROM CRD-8520B/1.00 at ata1-master PIO4
The harddisk is
Hello all! This is my boot process:
Dec 6 18:19:39 P-III syslogd: kernel boot file is /boot/kernel/kernel
Dec 6 18:19:39 P-III kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Dec 6 18:19:39 P-III kernel: Copyright (c) 1979, 1980,
scott renna wrote:
I've been running 5.3 for a little bit now using a
d-link g520 wireless card(ath0) and using a netgear
802.11b router. I've noticed a problem with
intermittancy. My system seems to have issues
maintaining steady data flow for long periods of time.
I just noticed my system is
Rob wrote:
Hi,
I have a PII PC running 5.3. The output of 'dmesg' has a line:
atapci0: VIA 82C596B UDMA66 controller [...] at device 7.1 on pci0
And at the end, it says:
ad0: 43979MB IBM-DTLA-307045/TX6OA50C [89355/16/63] at ata0-master PIO4
acd0: CDROM CRD-8520B/1.00 at ata1-master PIO4
The
Hi,
I have a small system running FreeBSD. I'd like to know if there's an easy way
to upgrade/update precompiled ports packages without using ports tree and
portupgrade.
Thanks
Alex G
___
[EMAIL PROTECTED] mailing list
On Wednesday 08 December 2004 3:41 am, Matthias Buelow wrote:
Richard Bradley wrote:
ScotGold seems reasonably priced, but once you've bought their minimum
order of 10, you're again paying almost £5.
Is there a gap in the market?
the question is if that would be economical. do you also
It's Jason over here with the Free Stuff Sites - Directory by FunnyTaf, Inc.
Please add your free site(s) to our directory:
http://www.funnytaf.com/free/
Our homepage has a PR of 4. www.funnytaf.com
To add your site, please go to:
http://www.funnytaf.com/free/directory/suggest_link.php
You
Hi All,
I am facing a lot of memory issues with all services in the server.
Following log will tell you what is the exact problem.
dmesg
18575 (exim-4.43-0), uid 26: exited on signal 11
pid 18595 (exim-4.43-0), uid 26: exited on signal 11
pid 18512 (httpd), uid 65534: exited on signal 11
pid
List,
I am new to FreeBSD finding is little difficult with administrative
commands. I have worked on RedHat Suse. Service startup, boot scripts,
pstree command everything seems to be different in FreeBsd compare to
RedHat or Suse.
Can any give me good ref URL other that FreeBSD.org to
Hi,
I would like to run FreeBSD on a cheep HP server, and the DL140 looks great
from a price point of view.
Has anyone tried installing FreeBSD 4.10 or 5.3 on one of these?
Anyone know of a current dual port NIC that is supported under FreeBSD, and
will fit into the above server?
I would
I have a Virtual PC to install FreeBSD , but when i try to install appears an
error explaining that couldn't find an ELF library. How can i fix it?
Thanks,
Alexis
Please reply my message asap.
___
[EMAIL PROTECTED] mailing list
Hi
Can i boot from my Virtual PC?
Thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
hello,
i have a 10/100 fast ethernet pccard labeled sitecom.
it is built around the asix ax88790 chipset and runs
at 10 mbit using the ed driver.
is 10 mbit/sec the maximum transfer rate the ed driver
supports?
does somebody know a way i can use this card at 100
mbit/sec on my
On 2004-12-08 15:55, Milind Nanal [EMAIL PROTECTED] wrote:
I am new to FreeBSD finding is little difficult with administrative
commands. I have worked on RedHat Suse. Service startup, boot scripts,
pstree command everything seems to be different in FreeBsd compare to
RedHat or Suse.
Have anyone tried to install Brighstor ARCserve Backup for Linux on FreeBSD?
discordia# pwd
/mnt/cdrom/agents/Linux
discordia# ./install
./install: 43: Syntax error: Bad substitution
line 43 is:
printf %-42s $INST_MSG_102 ${FILESYS_GROUP[$VCOUNT]}
Dear Sir,
I want to see the files of the other computer of my 2-pc lan , which runs
winxp and has a nfs filesystem.
I know that i must edit /etc/fstab , and use the smbfs utility as told on the
FAQ .
But i could not run smbfs command , and other commands like smbutil , ask a
lot of
On Thu, 09 Dec 2004 02:25:30 +0100, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
hello,
i have a 10/100 fast ethernet pccard labeled sitecom.
it is built around the asix ax88790 chipset and runs
at 10 mbit using the ed driver.
is 10 mbit/sec the maximum transfer rate the ed driver
ScotGold seems reasonably priced, but once you've bought their minimum
order of 10, you're again paying almost £5.
Is there a gap in the market?
Try ScotGold - http://www.scotgold.com/ They're located in the UK and
have a variety of BSD merchandise, not just case badges.
I don't want to pick on
Nelis Lamprecht wrote:
On Thu, 09 Dec 2004 02:25:30 +0100, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
hello,
i have a 10/100 fast ethernet pccard labeled sitecom.
it is built around the asix ax88790 chipset and runs
at 10 mbit using the ed driver.
is 10 mbit/sec the maximum transfer rate the ed
Dundar Turker wrote:
Thanks for the quick reply... But I'm not so convinced with this answer...
May I ask how will it change the process.? In the end the
libjavaplugin_oji.so is the one to get loaded isn't it, which in turn
generates the error I get.
I linked libjavaplugin_oji.so (not
On Wed, Dec 08, 2004 at 09:41:15PM +0900, Rob wrote:
ad0: 43979MB IBM-DTLA-307045/TX6OA50C [89355/16/63] at ata0-master PIO4
acd0: CDROM CRD-8520B/1.00 at ata1-master PIO4
The harddisk is very new and can do UDMA100. With a UDMA66 controller
I expect the harddisk to operate at least at 66
Henry Miller wrote:
On 12/9/2004 at 02:25 [EMAIL PROTECTED] wrote:
hello,
i have a 10/100 fast ethernet pccard labeled sitecom.
it is built around the asix ax88790 chipset and runs
at 10 mbit using the ed driver.
is 10 mbit/sec the maximum transfer rate the ed driver
supports?
does somebody
On Wed, Dec 08, 2004 at 09:30:56AM +0100, Stijn Hoop wrote:
On Wed, Dec 08, 2004 at 07:26:22PM +1100, Alastair G. Hogge wrote:
On Wed, 8 Dec 2004 04:38, Lucas Holt wrote:
Just an fyi, the ffmpeg port is not building propery for two possible
reasons. First, several of the html documents
In the last episode (Dec 08), Vonleigh Simmons said:
In the last episode (Dec 07), Vonleigh Simmons said:
After updating to 5.3 I'm running into the following, I'm
getting the following error in my mail log over and over:
usr/local/libexec/mlock[755]: (64) not setgid mail
I
List,
I am new to FreeBSD finding is little difficult with administrative
commands. I have worked on RedHat Suse. Service startup, boot scripts,
pstree command everything seems to be different in FreeBsd compare to
RedHat or Suse.
Can any give me good ref URL other that FreeBSD.org
Jerry McAllister wrote:
snip
OK. So I went and looked for them. They are from FreeBSD Mall.
Go to: http://www.freebsdmall.com/cgi-bin/fm
Select 'Promo' and then 'FreeBSD Sticker Sheet'
They are only $0.50 US each so get a hundred or so.
There are a bunch of
On Wed, Dec 08, 2004 at 01:06:27PM -0200, Mario Sergio Fujikawa Ferreira wrote:
On Wed, Dec 08, 2004 at 09:30:56AM +0100, Stijn Hoop wrote:
On Wed, Dec 08, 2004 at 07:26:22PM +1100, Alastair G. Hogge wrote:
On Wed, 8 Dec 2004 04:38, Lucas Holt wrote:
Just an fyi, the ffmpeg port is not
In the meantime Bakbone support managed to send me a working (binary) patch
fixing the problem and I was asked by Bakbone to post this information. So,
if you experience the problem described below, please contact Bakbone
support.
Best regards,
Georg Altmann
--On Montag, November 22, 2004
On Wed, Dec 08, 2004 at 03:55:11PM +0530, Milind Nanal said:
List,
I am new to FreeBSD finding is little difficult with administrative
commands. I have worked on RedHat Suse. Service startup, boot scripts,
pstree command everything seems to be different in FreeBsd compare to
RedHat
Hello,
I want to be alerted when a disk on the server fails, does Vinum generate
syslog when a disk part of a mirror volume fails?
Faisal Ali
Kintetsu Global IT Inc.
Network Engineer
100 Jericho Quadrangle, Suite 144
Jericho, NY 11753
___
[EMAIL
On Wed, 8 Dec 2004 23:49:31 +1100, Alex G [EMAIL PROTECTED] wrote:
Hi,
I have a small system running FreeBSD. I'd like to know if there's an easy
way to upgrade/update precompiled ports packages without using ports tree
and portupgrade.
Hi all. I need to get the percent busy for the disks in my servers,
so that I can graph/monitor them. I've looked into the UCD-SNMP MIBs,
but their % busy counters for disks don't appear to work. I know I
can use iostat to get the close to instantaneous % busy, but I'm
looking for a 5 minute
On Wed, 8 Dec 2004 12:04:58 -0500, Brian McCann wrote
Hi all. I need to get the percent busy for the disks in my servers,
so that I can graph/monitor them. I've looked into the UCD-SNMP
MIBs, but their % busy counters for disks don't appear to work. I
know I can use iostat to get the
I'm using RRDTool now for a lot of things, but it's just a
database...I need to feed in the data I need...that's the hard
part...getting the data. Same goes with Nagios/Netsaint. I know they
do the disk % used, but I'm fairly confident they don't do busy
%...I'll check though...I forgot about
Hi,
I'm first time installing FreeBSD.
I'm trying to configure X server.
And I have a problem with configuring of X server.
I use the instructions for installation and configuration.
Which says: use /stand/sysinstall
Take Configure
Then pick XFree86
The problem is that I can't find XFree86;
On Wed, 8 Dec 2004 04:08:12 +
RW [EMAIL PROTECTED] wrote:
I've been trying to burn a single large file (a 4.2 GB encrypted
gbde filesystem within a file) to a DVD, but mkisofs tells me the
file is too large.
I looked on Google and found that mkisofs had a filesize limit of 2
GB, but
On Wed, 8 Dec 2004 04:08:12 +, RW
[EMAIL PROTECTED] wrote:
I've been trying to burn a single large file (a 4.2 GB encrypted gbde
filesystem within a file) to a DVD, but mkisofs tells me the file is too
large.
I looked on Google and found that mkisofs had a filesize limit of 2 GB,
Hi,
I'm first time installing FreeBSD.
I'm trying to configure X server.
And I have a problem with configuring of X server.
I use the instructions for installation and configuration.
Which says: use /stand/sysinstall
Take Configure
Then pick XFree86
The problem is that I can't
Vonleigh Simmons writes:
/usr/local/etc/init.d/ which you have to rename to mysql.sh.
I do have a file in rc.d:
Ah, sure. init.d is linuxish.
It just so happened that I installed a 5.3 box from scratch in the
last couple of days. MySQL wasn't installed yet, so I grabbed the
On Wednesday 08 December 2004 15:16, Vulpes Velox wrote:
On Wed, 8 Dec 2004 04:08:12 +
RW [EMAIL PROTECTED] wrote:
I've been trying to burn a single large file (a 4.2 GB encrypted
gbde filesystem within a file) to a DVD, but mkisofs tells me the
file is too large.
I looked on
I continually receive an error message about a bad host name. This is the
error message:
Starting cron
Local package initialization: printerDec 7 21:20:44 [EMAIL PROTECTED]
lpd[438]: Get_local_host: hostname '[EMAIL PROTECTED]' bad
2004-12-07-21:20:44.236 Get_local_host: hostname '[EMAIL
On Tuesday 07 December 2004 20:20, Lowell Gilbert wrote:
Paulo Fonseca Jr. [EMAIL PROTECTED] writes:
I tried to configure my kernel including device pcm to set soundmax card
on P4SP-MX SE motherboard but config not runs ok: device pcm is
unknown.
Somebody who already installed this
Dear [EMAIL PROTECTED]
GTK-Server is a program that allows scripts to have
a graphical interface with I/O. It also works with
several programming languages. The one I am most interested
in is yabasic.
I am working with Peter Van Eerten to try to get
GTK-Server working on FreeBSD 5.3. Peter is
On Wed, Dec 08, 2004 at 06:29:27PM +0530, Akhthar Parvez. K wrote:
Hi All,
I am facing a lot of memory issues with all services in the server.
Following log will tell you what is the exact problem.
dmesg
18575 (exim-4.43-0), uid 26: exited on signal 11
[...]
pid 19600 (exim-4.43-0),
On Wednesday 08 December 2004 17:42, Paul Mather wrote:
On Wed, 8 Dec 2004 04:08:12 +, RW
[EMAIL PROTECTED] wrote:
I've been trying to burn a single large file (a 4.2 GB encrypted gbde
filesystem within a file) to a DVD, but mkisofs tells me the file is too
large.
I looked on
Hi,
I'm receiving the folowing error when a windows machine to try a connection
with internet through freebsd adsl (ppp) gateway: IF windows.myisp.com.br IN
A rrset doesn't exist add windows.myisp.com.br 300 IN A 192.168.0.3: timed
out. I'm not running a dns on
My dhcpd.conf:
option
growisofs is your solution. It is in the dvd+r-tools port in
/usr/pots/sysutils.
This was supposed to be a front end to mkisofs and therefore handles
most of the options that mkisofs has.
It also allows you to burn directly to disc! (I use this one a lot,
great for backups).
-Randy
RW wrote:
Leon writes:
Hi,
I'm first time installing FreeBSD.
I'm trying to configure X server.
And I have a problem with configuring of X server.
I use the instructions for installation and configuration.
Which says: use /stand/sysinstall
Take Configure
Then pick XFree86
Newer
Jerry wrote:
Chris wrote:
[..]
For myself, I want one so I can stick it on my desktop at home so
it'll look better to casual computer users and to annoy my wife that
my desktop is better than her gentoo desktop.
OK. So I went and looked for them. They are from FreeBSD Mall.
Go
On Wednesday 08 December 2004 18:54, Randy Grafton wrote:
growisofs is your solution.
No, it isn't. I originally hit the problem using growisofs, although the error
comes from mkisofs. Installing the development version of mkisofs solves the
burning problem, but FreeBSD can't use the file.
What happens if you run /usr/local/etc/rc.d/mysql-server.sh start
manually? Does the log file enlighten you
(/var/db/mysql/[boxname].err)?
I think you may have found it. I was able to stop mysql using the rc
script. However starting it back up did nothing:
# /usr/local/etc/rc.d/mysql-server.sh
In the last episode (Dec 08), Vonleigh Simmons said:
In the last episode (Dec 07), Vonleigh Simmons said:
After updating to 5.3 I'm running into the following, I'm
getting the following error in my mail log over and over:
usr/local/libexec/mlock[755]: (64) not setgid mail
I
Someone broke the silence:
What happens if you run /usr/local/etc/rc.d/mysql-server.sh start
manually? Does the log file enlighten you
(/var/db/mysql/[boxname].err)?
I think you may have found it. I was able to stop mysql
using the rc
script. However starting it back up did
Peter has managed to get it compiled on FreeBSd5.3,
however when run a yabasic demo program that uses
GTK-Server, I get an error message that library
nss_dns.so.1 is missing.
I have searched the ports tree and found references
to this in files in these locations...
eshop1# grep -r -i
Since you didn't mention which mysql version you are using..I will say
this.
In the /usr/ports/UPDATING...there is a paragraph.
20041031:
AFFECTS: users of databases/mysql40-server
AUTHOR: [EMAIL PROTECTED]
The MySQL Daemon must now be enabled / disabled in rc.conf.
See the script for
The code that does the check is this:
struct group *grp = getgrnam (mail);
if (!grp || (grp-gr_gid != getegid ())) die (not setgid
mail,EX_USAGE);
The only way I can see that failing is if getgrnam() failed to look up
the mail group, or if the gid of mlock doesn't match the gid returned
by
On Wed, 8 Dec 2004 12:05:13 -0800, Vonleigh Simmons
[EMAIL PROTECTED] wrote:
What happens if you run /usr/local/etc/rc.d/mysql-server.sh start
# /usr/local/etc/rc.d/mysql-server.sh start
Starting mysql.
Yet mysql never started up, here is the error log:
---
041208 14:07:26 mysqld
I'm having problems accessing a shared FAT32 partition in FreeBSD 5.3.
When I try to mount the partition, it says: bad FAT32 filesystem. I'll
explain what I'm trying to do, and what I've tried. I have one hard
drive, and I'm trying to get Windows XP Pro, FreeBSD 5.3, and Fedora
on it. I want to
Hello
I have tried to find solution to my problem for a while but have only found
solutions to why is Samba on Freebsd between Win2k too slow. Mine wokrs
fine between win2k and BSD box.
I have freebsd 4.10 and 10MB network. With pentium 300mhz and 128MB memory
running samba-3.0.5 i´m not
Peter has managed to get it compiled on FreeBSd5.3,
however when run a yabasic demo program that uses
GTK-Server, I get an error message that library
nss_dns.so.1 is missing.
I have searched the ports tree and found references
to this in files in these locations...
eshop1# grep -r -i
This makes sense to me. I too suspect it is some kind of version problem. On
Linux machines I had to use mozilla 1.7.3 to get this plugin working fine.
Previous versions did not work. FreeBSD ports have version 1.7.2. I believe
FreeBSD should make this 1.7.3 or newer versions of mozilla
On Wed, 8 Dec 2004 14:48:26 +0100, Piotr Gnyp [EMAIL PROTECTED] wrote:
Have anyone tried to install Brighstor ARCserve Backup for Linux on FreeBSD?
discordia# pwd
/mnt/cdrom/agents/Linux
discordia# ./install
./install: 43: Syntax error: Bad substitution
line 43 is:
printf
it was said:
I'd put those badges on all the servers I configured if they weren't
2 bucks a pop! I'd be willing to pay a quarter, or at most 50 cents,
but $2 seems excessive.
--Brett
Wonder what they do with that execessive profit from their
merchandise?
It would be AWESOME if FreeBSD supported multiple IPs per jail.
In my opinion, this is one of FreeBSD's greatest disadvantages on the
virtual server market, as some specific customers will always require
multiple IPs (shell providers for one).
Also, interface virtualization and firewalls inside
Greets,
I haven't been following FreeBSD much at all lately, having gotten a Linx admin
job, so forgive me:
I'm installing FreeBSD 5.3 on a new machine. I've added a second disk, and
80Gig Maxtor IDE drive. I use sysinstall to partition it, and run
disklabel/newfs, etc, mounting it as
On Dec 7, 2004, at 7:33 PM, Mário Gamito wrote:
Searching in the hardware suported by 5.3 i see no (obvious) reference
to Intel ICH5 SATA disk controler.
But googling for intel ich5 freebsd, there are lots os links about
this issue.
Some talk about patches, even in this list, several months
On Dec 7, 2004, at 7:57 PM, Mail Admin wrote:
I have it working, though could not manage to get the hardware RAID
going:
An ICH5 doesn't necessarily have hardware RAID. My Del PE400SC does
not.
--
David Kelly N4HHE, [EMAIL PROTECTED]
On Wed, Dec 08, 2004 at 03:55:11PM +0530, Milind Nanal wrote:
List,
I am new to FreeBSD finding is little difficult with administrative
commands. I have worked on RedHat Suse. Service startup, boot scripts,
pstree command everything seems to be different in FreeBsd compare to
RedHat
thursday [EMAIL PROTECTED] writes:
Greets,
I haven't been following FreeBSD much at all lately, having gotten a Linx
admin job, so forgive me:
I'm installing FreeBSD 5.3 on a new machine. I've added a second disk, and
80Gig Maxtor IDE drive. I use sysinstall to partition it, and run
Hi,
There seems to be another breakage: ffmpeg doesn't grab anymore. It just sits
there and dumps core with page already free on exit. Comparing to
libavformat/grab.c, the following patch (sort of) fixes situation, bit only
partially.
Regards,
Vladimir
***
There seem to be a LOT of great articles about how to update a freebsd
system. But they all seem to recommend a different approach. I am
looking for a simple way to keep the OS up to date.
Background info: I am going to be running a few FreeBSD production
servers. I need to document everything
I am facing a lot of memory issues with all services in the server.
Following log will tell you what is the exact problem.
Have you tried cleaning the contacts on the memory stick?
Cotton bud and rubing alchool, thooth paste, sliver cleaning paste,
car polish... OK use alchool last to rinse
Earlier this evening I did a full CVSup on a FreeBSD 4.9 machine using
RELENG_4, built and installed the kernel and world. My question is: are all
the patches released since the last release came out included when I use
CVSup? Or is it still necessary to patch the system after install? My
guess
sweet, that's great.
I only notice it drop during times when i push data
over the line. in this case it's a server that is
tucked away in the back of my place.
i am getting tired of sitting in there using a windows
laptop to diagnose why it doesn't work.
i wasn't sure if using the NDISulator
On 2004-12-08 19:50, Cyber Dog [EMAIL PROTECTED] wrote:
Earlier this evening I did a full CVSup on a FreeBSD 4.9 machine using
RELENG_4, built and installed the kernel and world. My question is: are all
the patches released since the last release came out included when I use
CVSup? Or is it
At 04:25 12/8/2004, Milind Nanal wrote:
List,
I am new to FreeBSD finding is little difficult with administrative
commands. I have worked on RedHat Suse. Service startup, boot scripts,
pstree command everything seems to be different in FreeBsd compare to
RedHat or Suse.
Can any give me
See below
--- Toomas Aas [EMAIL PROTECTED] wrote:
orville weyrich wrote:
In any event, the example shown in the link lacks
context. Is the failed drive named data1?
It is automagically replaced by a new drive named
data3?
In all cases I've replaced a failed drive, I have
named the
1 - 100 of 120 matches
Mail list logo
