wishes
Eugene
-Original Message-
From: Glenn McCalley
Sent: Thursday, September 19, 2013 10:30 PM
To: freebsd-questions@freebsd.org
Subject: how to tell which process call sendmail
So, some idiot is using a cgi or php or something to send mail out of his
website that he shouldn't be sending
Hi,
Yes, I have a similar setup at work (though currently migrating it to DHCP
to accommodate mobile clients and simplify management). But I suppose OP
would like to basically keep his the architecture intact =)
Best wishes
Eugene
-Original Message-
From: Al Plant
Sent: Friday
Hi Daniel,
The easiest way is to check the LAN Config (or similar) page of the router.
They usually allow one to specify fixed IP and hostname for the DHCP clients
based on the MAC addresses.
Best wishes
Eugene
-Original Message-
From: Daniel Nang
Sent: Thursday, September 12
that. This does not
seem to happen with newer heatsinks so they must have changed the design
somehow =)
Best wishes
Eugene
-Original Message-
From: Peter Giessel
Sent: Monday, August 05, 2013 8:23 AM
To: Gary Aitken
Cc: freebsd-questions@freebsd.org
Subject: Re: AMD Phenom II X4
address.
Best wishes
Eugene
-Original Message-
From: s m
Sent: Thursday, July 11, 2013 2:19 PM
To: freebsd-questions
Subject: prevent ip conflict in dhcp client
hello all
i have a question about dhcp client. i want to know if there is any way to
understand the ip address which
a public IP address (sometimes this is optional service
that costs extra money) and it happens that your provider also uses
192.168.x.x block in ITS internal network (that is EXTERNAL for you), just
change your internal networks to some other block.
Regards,
Eugene
-Original Message
/query-pr.cgi?pr=180241
However the master.passwd is fine, thus as a workaround you can simply run
vipw to resave master.passwd, then vipw regenerates binary password
databases correctly and everything works quite nicely.
Best wishes
Eugene
-Original Message-
From: Eugene
Sent: Tuesday
Eugene
-Original Message-
From: Bill Tillman
Sent: Wednesday, July 03, 2013 7:26 PM
To: freebsd-questions@freebsd.org
Subject: Re: X client without X server
Just my 2¢ worth on this. Sure, one always wants to keep overhead low. But
the days of limited RAM, small hard drives, etc
configurations).
The data merging phase was quite bearable and reasonable (if a bit tedious)
and all the databases got properly updated.
Thanks to everyone involved!
Eugene
-Original Message-
From: Mike Brown
Sent: Wednesday, June 26, 2013 6:22 AM
To: freebsd-questions@freebsd.org
soon (especially as 8.2 is already not compatible with some ports).
Best wishes
Eugene
-Original Message-
From: Mike Brown
Sent: Tuesday, June 25, 2013 12:14 PM
To: freebsd-questions@freebsd.org
Subject: Re: Should I be able to use mergemaster with freebsd-update?
I'm using freebsd
Hello there,
i really want your help on this matter.So.
i create a group audio and fix conf file at
/etc/security/limit.d/limits.conf
i can open jackd as root with real-time prio but not as regular user.
Thank you.
___
freebsd-questions@freebsd.org
12.04.2012 00:05, Коньков Евгений пишет:
Здравствуйте, Eugene.
Вы писали 10 апреля 2012 г., 0:39:52:
EG 10.04.2012 01:36, Коньков Евгений пишет:
Hi.
Apr 9 19:51:58 fsck: /dev/ad8s1e: UNEXPECTED INCONSISTENCY, CANNOT RUN
FAST FSCK
Apr 9 19:51:58 fsck:
Apr 9 19:51:58 fsck:
Apr 9
10.04.2012 01:36, Коньков Евгений пишет:
Hi.
Apr 9 19:51:58 fsck: /dev/ad8s1e: UNEXPECTED INCONSISTENCY, CANNOT RUN FAST
FSCK
Apr 9 19:51:58 fsck:
Apr 9 19:51:58 fsck:
Apr 9 19:51:58 fsck: /dev/ad8s1e: UNEXPECTED INCONSISTENCY; RUN fsck
MANUALLY.
Apr 9 19:51:58 fsck: /dev/ad8s1e:
Hello first of all. This is my first post here.. a test..
i stream on line as i read todays post. So about xorg file cause i make 6
months with nvidia 9200fx let talk first for the card. second there is no
xorg need it so u can back up and delete it, and test you X with xrandr -q
man xrandr and
. Which is, by the way,
still not production-ready.
Win8 is on its way. It will bury you completely.
Eugene.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hi.
I'm trying to set up LDAP user authentication. I use bet/nss_ldap and
security/pam_ldap ports to do this.
I'm doing this following the article from the documentation set. Though
it's not that complete and misses some very important stuff, I've
actually set up the LDAP installations and my
Thanks a lot
On Tuesday 26 July 2011, Martin Matuska wrote:
Dňa 22. 7. 2011 9:48, Eugene Mitrofanov wrote / napísal(a):
Hi all,
I just updated to 8.2S and zfs v28 and notice strange thing: in the
manual i
can read about aclmode but i can not use it in the real life:
# zfs set
Hi all,
I just updated to 8.2S and zfs v28 and notice strange thing: in the manual i
can read about aclmode but i can not use it in the real life:
# zfs set aclmode=passthrough data/public
cannot set property for 'data/public': invalid property 'aclmode'
Obsolete manual?
Good luck
--
Hi
I observe the very strange message while run a lot of commands:
r...@beaver:eugene# glabel status
Unexpected XML: name=stripesize data=18432
Unexpected XML: name=stripeoffset data=0
Unexpected XML: name=stripesize data=18432
Unexpected XML: name=stripeoffset data=0
Name Status
How can I locate this device? Also I dont understand why mdconfig complains?
On Tuesday 14 December 2010, Ivan Voras wrote:
On 14/12/2010 15:27, Eugene Mitrofanov wrote:
Hi
I observe the very strange message while run a lot of commands:
r...@beaver:eugene# glabel status
Unexpected
On Tuesday 14 December 2010, Ivan Voras wrote:
On 14/12/2010 16:19, Eugene Mitrofanov wrote:
How can I locate this device? Also I dont understand why mdconfig
complains?
Try examining the output of
# sysctl -b kern.geom.confxml
Here they are:
mesh
class id=0x807a5a20
Hello
I need the advise. Does anybody got the Subj working?
I have FreeBSD 7.3-p2, Generic kernel. I try to set up the netflow traffic
accounting using ng_ipfw from vlan interface. I created vlan interface, ipfw
rule, set up ng hooks but the netflow export is not working. tcpdump does
not
On Saturday 22 May 2010, jhell wrote:
On 05/21/2010 07:55, Eugene Mitrofanov wrote:
Hi
The command zfs set jailed=on tank/s1 is failed with the message
property 'jailed' not supported on FreeBSD: permission denied.
Output of zfs get jailed tank/s1 shows me that the property jailed
On Monday 24 May 2010, jhell wrote:
On 05/24/2010 02:13, Eugene Mitrofanov wrote:
On Saturday 22 May 2010, jhell wrote:
On 05/21/2010 07:55, Eugene Mitrofanov wrote:
Hi
The command zfs set jailed=on tank/s1 is failed with the message
property 'jailed' not supported on FreeBSD
Hi
The command zfs set jailed=on tank/s1 is failed with the message
property 'jailed' not supported on FreeBSD: permission denied.
Output of zfs get jailed tank/s1 shows me that the property jailed is
still exists:
NAME PROPERTY VALUESOURCE
tank/s1 jailedoff default
How can
Yuri ?:
Boris Samorodov wrote:
Install x11-fonts/webfonts and do apropriate changes to xorg.conf.
I have webfonts right after misc fonts at xorg.conf. That always
gave me good results.
Boris, Thanks for the advice.
I did what you suggested but there is no visible change.
Yuri
?
Thank you in advance, please Cc: me as I'm not on this list. If there is
more appropriate list for my questions, please point me to one.
Regards,
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
Fbsd1 пишет:
Eugene L. wrote:
Hello everyone, I have a FreeBSD 7.1-Release (generic kernel), and I
am trying to make splash screen feature work properly, so I followed
the procedure described in handbook and the splash screen actually
loads, except the black is now white, red is violet, etc
I am planning to update to CURRENT, been reading freebsd-current for
some time, apparently some ports require rebuilding as they are kernel
specific, like hal, so I wonder how to rebuild those ports automatically?
___
freebsd-questions@freebsd.org
On Tue, 14 Apr 2009 13:22:34 -0500, Richard DeLaurell [1]richard.delaur...@gma
il.com wrote:
Could you tell me please where the changes to the xorg.conf file which are
necessitated by 7.4 are documented?
I think they are mentioned in /usr/ports/UPDATING - I haven't
updated my X yet due to the
Hello everyone, I have a FreeBSD 7.1-Release (generic kernel), and I am
trying to make splash screen feature work properly, so I followed the
procedure described in handbook and the splash screen actually loads,
except the black is now white, red is violet, etc.
So all the colours of the
to debug the kernel
and need not rebuild your development box. Test your changes with the system
installed into VM and reboot it only. Use ddb or kgdb already noted here.
Eugene Grosbein
___
freebsd-questions@freebsd.org mailing list
http
01.12.2008, в 15:52, Mel написал(а):
Can't check telnet... there's no telnet demon around.
inetd:
$ grep telnet /etc/inetd.conf
#telnet stream tcp nowait root/usr/libexec/telnetd
telnetd
#telnet stream tcp6nowait root/usr/libexec/telnetd
telnetd
Quick setup:
Didn't found on lists.freebsd.org, so I resend it
On 1 дек, 05:03, Chris [EMAIL PROTECTED] wrote:
I was curious about your situation and set up a couple of tests. Noting
you mentioned iTerm, I thought I might be able to recreate it on a Mac
(OS-X 10.4 with 1.4.3 (100) version Terminal, I had
On 1 дек, 05:03, Chris [EMAIL PROTECTED] wrote:
I was curious about your situation and set up a couple of tests. Noting
you mentioned iTerm, I thought I might be able to recreate it on a Mac
(OS-X 10.4 with 1.4.3 (100) version Terminal, I had removed iTerm due
to unreliability sometime
On 1 дек, 08:31, Mel [EMAIL PROTECTED] wrote:
On Sunday 30 November 2008 17:53:21 Eugene Pimenov wrote:
30.11.2008, в 19:36, Mel написал(а):
On Sunday 30 November 2008 06:46:59 Eugene Pimenov wrote:
Not sure, but can you copy files via cat? As in:
cat /tmp/foo | ssh machine cat
On 1 дек, 15:52, Mel [EMAIL PROTECTED] wrote:
On Monday 01 December 2008 10:33:17 Eugene Pimenov wrote:
inetd:
$ grep telnet /etc/inetd.conf
#telnet stream tcp nowait root /usr/libexec/telnetd telnetd
#telnet stream tcp6 nowait root /usr/libexec/telnetd telnetd
30.11.2008, в 19:36, Mel написал(а):
On Sunday 30 November 2008 06:46:59 Eugene Pimenov wrote:
Not sure, but can you copy files via cat? As in:
cat /tmp/foo | ssh machine cat - /tmp/foo
If that isn't truncated, I can only think of clipboard limitations
or tty
issues.
No, it's
On 30 нояб, 23:20, Ivan Voras [EMAIL PROTECTED] wrote:
I regularly do copy-pastes of textual data of that size (and larger) in
interactive sessions (with text editors) without problems, between
FreeBSD machines and from Linux to FreeBSD machines. Are you sure it's
not a problem with your
Hello everyone,
I'm not really sure weither it's related to freebsd or ssh.
When I paste a lot of data (6060 bytes, 60 lines 100 bytes each +
‘\n’) via ssh into `cat test.txt` or the small program, one freebsd
receives 5181, another receives 3221 bytes.
The number of bytes freebsd
difference
either.
Has anyone solved this? Any help would be appreciated.
Cheers,
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
subdisks:
S propeller.p0.s0 State: up D: b0 Size: 99 MB
S propeller.p0.s1 State: up D: b1 Size: 99 MB
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org
-0 - -
Thanks in advance!
--
Best regards,
Eugene mailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Hello Girish,
Wednesday, November 14, 2007, 1:25:41 PM, Girish Venkatachalam [EMAIL
PROTECTED] wrote:
GV On 09:50:51 Nov 14, Eugene wrote:
Hello freebsd,
We have two FreeBSD boxes, each one has 4 CARP interfaces in
preempt
mode, without arp balancing.
Backup without any reason
Hi!
Does any modern web browser exist there, that is capable to run
with Xlib only, e.g. without any client fonts (using remote font server
instead), that does not require fontconfig, cairo, Render extention?
Please CC: me when replying, I'm not in a list. Thank you.
Eugene Grosbein
)
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
anybody know whete I can find FRESH howto about installation
of this drivers? Why I see USB messages about ugen, when I
turning on WiFi adapter? What should I do to configure WiFi?
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
On Thu, Jun 01, 2006 at 09:15:52PM +0400, Andrew Pantyukhin wrote:
On 6/1/06, Eugene M. Minkovskii [EMAIL PROTECTED] wrote:
It seems to me that I see a bug in tcpdump(1): option -A working
same as -x and don't produce ASCII output.
Попробуй так: tcpdump -npx -i iface
Thank you, but I
It seems to me that I see a bug in tcpdump(1): option -A working
same as -x and don't produce ASCII output.
(I use FreeBSD 6.1)
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org mailing list
On Tue, May 02, 2006 at 08:15:06AM +0400, Eugene M. Minkovskii wrote:
Hello.
I'm cvsuped from FreeBSD 5.4 to 6.1 RC2 and loose my russian
locale:( I can't type russian letters and many programs print
some warnings about locale. But russian fonts are worked: When I
go to other mashine
:
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
any body know other, more directly
method?
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
stopped, it goes down to RSS=0.5GB and VSZ=0.6G -- but Inactive
Memory remains above 2.5GB.
Is it a memory leak somewhere or what?
Thanks in advance
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
in advance
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
measures -- e.g. How much memory can be allocated off-hand
without any disk I/O and How much memory can be allocated so that swapped
data would not have to be re-read again in reasonable time?
Thanks a lot
Eugene
___
freebsd-questions@freebsd.org mailing
Hi,
I would like to know if there is a institution in South Africa, Gauteng,
Pretoria that offers Certification on Free BSD?
And what are there contact details.
Yours truly,
Eugêne Prenzler
IT Divisional Manager
Behaviour Systems Development (Pty) Ltd.
(+27)12-309-6000
Hello, please tell me, how can I (if I can) mount UFS2 partition
under Linux (I install gentoo Linux 2005.1).
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org mailing list
http
FreeBSD kernel:
device sc
options SC_HISTORY_SIZE=1000
options SC_PIXEL_MODE
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Sensory yours, Eugene Minkovskii
Сенсорно ваш, Евгений Миньковский
___
freebsd-questions
Did you install the linux binaries?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
without touching
other subsystems ? As far as I understand, simply increasing MAXUSERS is not
a good idea, because it will also increase NMBCLUSTERS and such, which I do
not really want.
Please Cc: me as I'm not on this list.
Regards,
Eugene
___
freebsd
because none of user's groups
are listed in AllowGroups, and I can't see from what IP I got
this request.)
Moreover, I think parsing auth.log is not beautelul idea. Can
sshd do some actions after he allow or deny connection? Can he
run some script with some arguments?
--
Sensory yours, Eugene
On Mon, May 30, 2005 at 03:53:29PM +0200, Christian Tischler wrote:
Eugene M. Minkovskii wrote:
On Sun, May 29, 2005 at 10:55:41PM +0200, Christian Tischler wrote:
Hi,
I am running a FreeBSD 5.1 system and some time ago it startet to
forget some user passwords.
As the system is now
, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
If the group as a whole want to go with FreeBSD, then why are some of
the members scared of the text. If you are indeed programmers, then
you should not be scared of text. It sounds like you do not know a
lot about FreeBSD so I would suggest to stick with what you know if
all you are doing is
I'm considering purchasing an APC BX800-CN UPS for my home file
server. What I don't understand, is what happens when the power comes
back on? Does the UPS somehow turn the computer back on? Also, there
are a number of deamons that could be run for APC UPS's but which one
is most popular?
Eugene
for the user time?
Where and how should I call the above command sequence in order to seperately
log the logintime
for today using the last command??
Thank you in advance for any insights,
Eugene Zegers
--
___
Sign-up for Ads Free
I'm looking for the 'better' way to do it.
Thank you all once again.
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
items again the next day.
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
options.
Now I'm going to quickly swap my card for the adaptec and see what happens.
I still find it very odd that my card isn't working properly with the
OS. Maybe the card is faulty?
Eugene
___
freebsd-questions@freebsd.org mailing list
http
this issue.
Thank you once again for your help.
Eugene
acd0: CDROM GCR-8523B/1.03 at ata1-slave PIO4
ad4: 190782MB WDC WD2000JB-00GVA0/08.02D08 [387621/16/63] at
ata2-master UDMA100
ad6: 190782MB WDC WD2000JB-00GVA0/08.02D08 [387621/16/63] at
ata3-master UDMA100
ar0: 190782MB ATA RAID1 array [24321
that error message. However, I do see
that the RAID card, and the two disks, ad4, ad6, have been detected
properly.
I will attach my dmesg output below.
Thank you in advance.
Eugene
$ dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991
my HighPoint card with an Adaptec
1200a which I'm using as an ide card on the other computer. If it
works, I'll just leave the Adaptec in my FBSD and probably send off
the HighPoint to Søren Schmidt.
I'll keep you posted.
Thank you once again. =)
Eugene
, 0xfe77b400 irq 17 bufsz 16384
(1p/1r/0v channels duplex default)
Great! It seemes to all be okay!
But there are silenice in my headphones :( Have you any idea?
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing
Hi List
I've got Subj and FreeBSD-5.4PRE on it. But RAID0 is too slow:
[EMAIL PROTECTED]:eugene# dd if=/dev/zero of=/var/tmp/1 bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 31.949508 secs (3281979 bytes/sec)
Also what does the following mean?
Interrupt storm
Hi list
I've got the subj and tried to install FreeBSD.
5.3-R, 5.4-BETA1, 5.4-STABLE did not install at all. They timeouted on ATA
and hang while probing asr0, but 5.2.1-R installed fine. Any suggestion? I
would like to use 5.4-R. Does anybody use the subj with 5.3-R or later?
Best Regards
--
In safe mode 5.4-B1 and 5.3-R is booted fine from install CD without any
hangs.
On 29 2005 12:44, you wrote:
Have you tried installing it in safe mode?
Eugene Mitrofanov wrote:
Hi list
I've got the subj and tried to install FreeBSD.
5.3-R, 5.4-BETA1, 5.4-STABLE did not install at all
FYI: the problem is solved. I've installed 5.2.1-R and cvsup to 5.4-pre.
All works fine for me. It seems that it is a feature of the GENERIC kernel
from 5.3 / 5.4 boot cd.
Thanks
Hi list
I've got the subj and tried to install FreeBSD.
5.3-R, 5.4-BETA1, 5.4-STABLE did not install at all. They
inbound traffic? This traffic
goes into my machine because I use state table.
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
On Tue, Mar 22, 2005 at 01:18:27PM +0100, Peter N. M. Hansteen wrote:
Eugene M. Minkovskii [EMAIL PROTECTED] writes:
I'd say something along the lines of
allowed_out = { ssh, domain, http, https, etc... }
pass out on $ext_if proto tcp $allowed_out label allowed-out keep state
you
.
Unfortunely, this mean, that OpenBSD's pf can not measure
traffic, because we can not separate incoming and outgoing
traffic in bidirectional rule. Or we must not use keep state
feature.
--
Sensory yours, Eugene Minkovskii
,
___
freebsd
On Tue, Mar 22, 2005 at 02:28:09PM +0100, Peter N. M. Hansteen wrote:
Eugene M. Minkovskii [EMAIL PROTECTED] writes:
Unfortunely, this mean, that OpenBSD's pf can not measure
traffic, because we can not separate incoming and outgoing
traffic in bidirectional rule. Or we must not use keep
On Mon, Mar 21, 2005 at 08:54:35AM +0100, Peter N. M. Hansteen wrote:
Eugene M. Minkovskii [EMAIL PROTECTED] writes:
block in log on $ext_ip inet from any to $ext_ip label $ext_ip
pass in on $ext_ip inet from any to $ext_ip port 22 keep sate
As you can see, ssh packets match to all
Hello!
Does any body know, how can I use OpenBSD's pf (packet filter) for
determine total traffic volume on network interface? If it's
impossible, what facility you recommend me to do this?
--
Sensory yours, Eugene Minkovskii
,
___
freebsd
On Sun, Mar 20, 2005 at 05:51:58PM +0100, Peter N. M. Hansteen wrote:
Eugene M. Minkovskii [EMAIL PROTECTED] writes:
Does any body know, how can I use OpenBSD's pf (packet filter) for
determine total traffic volume on network interface? If it's
impossible, what facility you recommend me
has schg flag too. Is it nessesery?
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
servicec working good. For example, I can do
# telnet gateway 25
from LAN.
Provider's router is default router in /etc/rc.conf.
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
a bug, please use the flea(1) utility.
vvv.initials
1.3.28.nr.threadcomplete
rr.compressed
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
with lpd running or
not).
There isn't really much regarding this problem on the net. Usually
people have their USB printers working.
Any suggestions are appreciated.
Eugene Rogoza
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
And this is work at 15 febr. Is it bug or feature? Perhaps
crontab count day of month from zero? If so, when should work
command if I type directly number of day:
# min hour mday month wday command
0 714 * * echo Hello world
And how will be counted months?
--
Sensory yours, Eugene
interface hangs again.
Have you any ideas?
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi
Subj from CVS (with vlan support), FreeBSD 4.8-p16, 4.9-p3 and 5.3-Stable.
I installed Subj on the two my routers and noticed that it does not work as
should. I investigated the problem and discovered the following: vrrpd use
the different destination MAC addresses for sending VRRPv2
Hi, all!
Can anybody tell me how can I reset network statistic, which could be
seen by command `netstat -i'?
Thank you for advance
Eugene
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
trying rm -rf /var/tmp/temproot/var/empty in single user
mode with only /var mounted. But All of this useful.
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
On Thu, Jan 06, 2005 at 12:14:05AM +0100, J65nko BSD wrote:
On Wed, 5 Jan 2005 23:23:29 +0300, Eugene M. Minkovskii [EMAIL PROTECTED]
wrote:
Hi.
I use FreeBSD 5.3 and sendmail. When root rechieve the mail,
mailbox's (/var/mail/root) permission bits has been setted to
600. Who and how
/temproot/var: Directory not empty
rm: /var/old-tmp/temproot: Directory not empty
rm: /var/old-tmp: Directory not empty
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Eugene
M. Minkovskii
Sent: Thursday, January 06, 2005 12:55 AM
To: freebsd-questions
On Thu, Jan 06, 2005 at 05:20:55AM -0500, Chuck Swiger wrote:
Eugene M. Minkovskii wrote:
On Thu, Jan 06, 2005 at 01:03:31AM -0800, Ted Mittelstaedt wrote:
What is the error message when you:
[ ...steps removed... ]
Sorry Ted. System write Operation not permitted:
rm: /var/old-tmp
Hi.
I use FreeBSD 5.3 and sendmail. When root rechieve the mail,
mailbox's (/var/mail/root) permission bits has been setted to
600. Who and how it does? Can I change this behavior?
--
Sensory yours, Eugene Minkovskii
,
___
freebsd-questions
On Fri, Dec 31, 2004 at 05:44:51AM -0600, Nikolas Britton wrote:
Peter Ulrich Kruppa wrote:
On Thu, 30 Dec 2004, Tom Connolly wrote:
Eugene M. Minkovskii wrote:
Hi!
I'm confusing now: about a month ago I have upgrated from FreeBSD
5.2.1 to stable 5.3. Since this moment strange things
1 - 100 of 126 matches
Mail list logo