On Mon, May 23, 2011 at 08:46:14AM +0200, Luigi Rizzo wrote:
...
> For people interested in audio/video telephony, I'd also suggest
> baresip, which you can find at
>
> http://www.creytiv.com/pub/
>
> version 0.2.0 works almost with no effort on FreeBSD, does not ne
keleton for a port of version 0.2.0 is attached
cheers
luigi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
On Mar 3, 2009, at 19:07 , Charles Oppermann wrote:
On Tue March 3 2009 4:40:37 am Luigi Iannone wrote:
The EULA states:
"This License will be governed by and construed in accordance with
the
laws of the State of California,.."
Since I assume that Sweden has signed international
The EULA states:
"This License will be governed by and construed in accordance with the
laws of the State of California,.."
Since I assume that Sweden has signed international commercial
agreements with the USA, I think that it odes not matter what the
Swedish law says about signing or no
--- Begin Message ---
Hi all,
I would just like to know :
Is that a system as SCIM (system hwo allow to switch between keaboards)
under PC-BSD ? What is the name of this software ?
Thank you all.
Luigi
--- End Message ---
___
freebsd-questions
Hi all,
I would just like to know :
Is that a system as SCIM (system hwo allow to switch between keaboards)
under PC-BSD ? What is the name of this software ?
Thank you all.
Luigi
___
freebsd-questions@freebsd.org mailing list
http
Thank you very much for the stats.
Luigi
Marc G. Fournier a écrit :
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've put in a temporary page that generates the country statistics ... it doesn'
t look as good as the rest of the site, but loads significantly faster ...
- --On Mon
Leslie Jensen a écrit :
Luigi skrev:
Hi,
I'm a user of PC-BSD in Belgium.
I've installed bsdstats yet.
So I'd like to know if it's possible to have stats for Belgium and where
can I find it ?
Thank you very much.
Luigi
Hello Luigi.
I wrote to the webmaster at bs
Hi,
I'm a user of PC-BSD in Belgium.
I've installed bsdstats yet.
So I'd like to know if it's possible to have stats for Belgium and where
can I find it ?
Thank you very much.
Luigi
___
freebsd-questions@freebsd.o
Hi,
I'm a user of PC-BSD in Belgium.
So I'd like to know if it's possible to have stats for Belgium and where
can I find it ?
Thank you very much.
Luigi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/m
Ok thank you very much it works
Luigi
Kris Moore a écrit :
Luigi,
Normally you can't just "look-up" the password, however you can reset
it if you like. To reset, use this procedure:
1. Boot the system
2. At the splash loader screen, choose option "4" single user
Yes I think it is the root password of the system.
Ivailo Tanusheff a écrit :
Is this the root password of the system or something else?
Regards,
Ivailo Tanusheff
Luigi <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
12.03.2008 14:59
Please respond to
[EMAIL PROTECTED]
To
f
Thanks to all.
I'll try it.
Luigi
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi all,
Maybe it's a simple question but i'm a newbie lost in my new BSDworld.
I've installed PC-BSD but when I want to install a software, It ask me a
superuser password.
I think I lost this password. How can I retrieve this superuser password ?
Hi everyone,
I've got two hard drives on my pc:
Master /dev/hda1,hda2,hda3
and
slave /dev/hdb where I've installed PC-BSD.
I want to configure a grub who propose me to boot on my first drive of
my second drive.
Is it possible? How can I do it?
Thanks for your answe
Hi all,
I'm trying to implement a freebsd module, but I'm blocked on the
following error:
When I try to compile my module, which has the following event handler
static int
module_event(module_t mod, int type, void *data)
{
int err = 0;
int s;
switch (type) {
case MOD_LOAD:
Hello Bill,
Wednesday, April 25, 2007, 12:20:27 AM, you wrote:
>> >
>> > Not all modules work with PAE. Read the example PAE kernel file for
>> > information.
>> >
>> > PAE is an awful hack, BTW. I've heard a number of people complain that
>> > performance sucks under PAE.
>>
BM> Does this te
Hello Ivan,
Tuesday, April 17, 2007, 12:16:04 PM, you wrote:
IV> Solon Luigi Lutz wrote:
>> Hi again,
>>
>> after some troubleshooting and some hours of memory tests, it
>> finaly seems to be a hardware problem...
>> The machine is based on an ASUS M2N4-SLI (Nf
CS> Solon Luigi Lutz wrote:
>> after some troubleshooting and some hours of memory tests, it
>> finaly seems to be a hardware problem...
>> The machine is based on an ASUS M2N4-SLI (Nforce4) and since the
>> heat-sink on the north/southbridge is rather small and passiv
Hi again,
after some troubleshooting and some hours of memory tests, it
finaly seems to be a hardware problem...
The machine is based on an ASUS M2N4-SLI (Nforce4) and since the
heat-sink on the north/southbridge is rather small and passive,
the chip seems to get too hot. I manufactured a massive
Hello freebsd-questions,
I've setup a Freebsd 6.2 server with a Areca 1280 24-port SATA2-Raid
controller and some 24 500gb harddisks. CPU is a AMD64 Sempron 3000+.
---
FreeBSD rad.net 6.2-STABLE FreeBSD 6.2-STABLE #0: Sun Apr 8 12:39:46 UTC 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/RADIUM amd
On Sun, Jan 21, 2007 at 12:33:32PM +0300, Abdullah Al-Marrie wrote:
...
> > i put the line
> > /usr/local/bin/915resolution 58 1280 1024
> >
> > in /usr/local/etc/rc.d/00setvideo.sh
> > so it gets called automatically at startup
> >
> > cheers
&g
On Sat, Jan 20, 2007 at 06:05:45PM +, Abdullah Al-Marrie wrote:
> On 1/20/07, Luigi Rizzo <[EMAIL PROTECTED]> wrote:
> > On Sat, Jan 20, 2007 at 07:38:36AM -0500, Tsu-Fan Cheng wrote:
> > > under the subsection of display, i have
> > > Modes "10
sysutils/915resolution
which redefines the bios modes.
In my case (Dell Latitude X1) i run it as
#--- set 1280 resolution on video
/usr/local/bin/915resolution 5c 1280 768
you should probably change the 768 to 800 if that's your
screen height.
cheers
luigi
>
>
no
one has ever been.
(Alan Ashley-Pitt)
---->
Luigi Iannone - Laboratoire D'Informatique Paris 6
Address: 8, rue du Cap. Scott 75015 Paris (France)
e.mail: [EMAIL PROTECTED]
Tel: +33 (0)1
3, and 1?
no, the weights mean exactly what i wrote above, and they
are weights not priorities. As to the values to use,
that's entirely up to you.
cheers
luigi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/li
h-mid-low
priority!
cheers
luigi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
ny case the question is irrelevant here because tun0's queue
is drained by the userland process reading from /dev/tun0
and writing onto the output link. With a serial line and no
buffering you could hope that this matches the outbound
bandwidth, but with pppoe on adsl
Is this related to BPF Any known bug? Or just me?
Thanks
Luigi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
s recognised
by umass, but when you try to do anything on it you get BBB timeouts
and all sorts of misbehaviours.
Any better experience ?
cheers
luigi
--+-
Luigi RIZZO, [EMAIL PROTECTED] . ICSI (on leave fro
30 matches
Mail list logo
