Hi,
I need to have ftp access to a machine. I've found pure-ftpd but it was
Hummm, you want the short answer? Don't enable ftp :)
Ftp only accepts plain text passwords (until you enable things like
kerebos, one time password, etc), so it is not, it cannot be, secure.
SFTP is there, working
Hi,
The pre-shared information need not to be secret ... but there is
need for pre-shared trusted information.
Er, if the pre-shared information is not secret, how can I be sure
that the person presenting it is in fact my intended correspondent
and not a MIM?
That is why I wrote trusted,
What happened to Diffie-Hellman? Last I heard, its whole point was
to enable secure communication, protected from both eavesdropping
and MIM attacks, between systems having no prior trust relationship
(e.g. any sort of pre-shared secret). What stops the server and
client from establishing a
Hi,
I'm 100% GNU/Linux since 2001
No, not migrate all my machines to FreeBSD.
The way I would do is, when I have to put up a new machine, I install
FreeBSD, but the existing ones, I keep them with the existing OS,
untill they need replacement.
Best regards,
Olivier
Thanks,
What in a standard installation of FreeBSD, on a server running only
MySQL and Postgress, could cause the CD tray to open by itself from
time to time?
Dodgy hardware? If the manual eject button is a bit sticky, it could
have that effect. Seems the most likely explanation to
Hi,
What in a standard installation of FreeBSD, on a server running only
MySQL and Postgress, could cause the CD tray to open by itself from
time to time?
Thanks in advance,
Olivier
___
freebsd-questions@freebsd.org mailing list
cdcontrol eject ?
Then what would be causing cdcontrol eject?
This has been going on for many releases of FreeBSD (5 to 7) and only
on Intel Motherboards.
Olivier
___
freebsd-questions@freebsd.org mailing list
Hi,
I have 2 leasedlines for internet. the one is in a country. other one is in
a another country.
I am looking for a tool for estimating loss packets between 2 lines.
is there a tool for it?
for instance , while searching, I found badabing tool for that. But I
couldn't understand how it
Hi,
If I wanted to capture a video stream (say 30fps) in RAM and
store it or write to a file and/or sent it to a website or on
to another computer, what ports are avalable for this kind of
live capture?
I use mencoder for that. The input for video is a PCI video card
If you have physical access to the server, just reboot it in single user
mode,
and change the password. You might need to forcibly power it off. It is
all
covered in the handbook. If you don't have physical access, I think you
may
be out of luck...
May be out of luck? I
I have a web/ftp server loaded with FreeBSD. This was done a couple
of years back. Since then the person or persons that did the original
install have gone out of business and cannot be found.
Have you tried booting in single user mode?
Olivier
Hi again,
I have this weird error since yesterday, one a system that used to be
working nicely, suddenly:
ssh cores dump when run as non priviledged user, works fine for root
sshd aborts on signal 11
[... see my previous mails?]
This seems to be a problem linked to openssl from the ports
Hi,
I have one port, namely /usr/ports/www/pound that needs the version of
openssl from the ports (/usr/ports/security/openssl).
But others ports works way better with the stock openssl from the
system.
Is there a configuration somewhere that could be used to say that
no-one except pound
Hi again,
I have this weird error since yesterday, one a system that used to be
working nicely, suddenly:
ssh cores dump when run as non priviledged user, works fine for root
sshd aborts on signal 11
I tried to reinstall world, but it is the same.
There is openssl installed from the
Hi,
I have this weird error since yesterday, one a system that used to be
working nicely, suddenly:
ssh cores dump when run as non priviledged user, works fine for root
sshd aborts on signal 11
I tried to reinstall world, but it is the same.
There is openssl installed from the ports on that
and thats the one error I made in setting it up likely... (I saw that
note after rebooting in the handbook)
I have been there, I have done that.
Luckily my server is next door :)
Olivier
___
freebsd-questions@freebsd.org mailing list
is there any way to use an other machine on the net to kick start it
Unless you have an account on that master server that is not depending
on NIS, I see no way.
Bests,
Olivier
___
freebsd-questions@freebsd.org mailing list
In general I think most people would use command line tools to test
expressions.
Although I favor command line tools for most of my work (if only,
because it can work remotely, through a slow phone connection, across
the world); I like The Regex Coach (GUI tool) because it highlights
the
I have 35 log files that I want to flush once a day.
In order to keep them exist I now do an 'echo logfile.log'
How can I do such in one command having the same effect on all log files?
You could have a look at newsyslog: it would purge and recreate the
files for you, including the right
Hi,
Is this a problem with the pipe in the alias directive? The command
works on the CLI, as I literally copy/pasted it into the .cshrc file.
I would think so.
What about:
alias srm /usr/bin/find . -name *~ -delete
Best regards,
Olivier
___
Hi,
if this gets thru, i hope some of you can help me. i was
trying to correct the couple things mentioned and all of a
sudden i broke something in /etc/namedb/; then i seemed to fix
it,
one minute wife and daughter cannot get outside; then next
time
FreeBSD isn't much used within the University (I understand) and has a
(comparatively) poor security record. Most recently, for example:
http://www.h-online.com/security/news/item/Root-exploit-for-FreeBSD-873352.html
Are you trying to make your infosec guy look like an
Hi Doug,
Does anyone have had positive or negative experience using these USB-based
DAT tape drives? Specifically, I am looking at the HP (Hewlett-Packard)
I know that I am not really answering your question but here are a
couple of thoughts that came to my mind when reading your post:
- USB
Is there a way to change the Makefile so that they all get deleted
with just one y and a return? Or possibly use yes(1) to script it?
I often
yes | make delete-old
Olivier
___
freebsd-questions@freebsd.org mailing list
Hi David,
Despite reading the documentation I seem to be having difficulty setting up
the printer from the server. So far I have not been able to get the beast to
print-- I have scrapped all attempts at configuring the server and would
appreciate some guidance before I trying again!!
David,
So I should be able to use a similar approach to you. Is the script readily
available and what do I need to do to install and configure it?
I can share, but right now I have to go back home, I'll send it to you
tomorrow.
If you simply:
telnet your.printer 9100
and type some text
David,
Here it is:
- in /etc/printcap:
big:hp4300:\
:sd=/var/spool/big:\
:mx=0:rs:sh:\
:lp=/dev/null:\
:if=/usr/spool/big_new:\
- in /etc/rc.conf:
lpd_enable=YES
- the script /usr/spool/big_new. The location of the script is not the
best one, it should
By the way, something forgot to mention: the script only copies a file
from your computer to the printer; it does not do much magic appart
from that. As far as I remember, HP 2200 do not understand image
files, so you must use an external software (xv from ports?) to print
your image. But you
Hi,
and so on. So it's safe to say just merging the trees like this
isn't the way to go. What is the proper process to finish a bsd
image after installworld and installkernel is done?
Not sure what you are trying to do, but usually you better follow the
instructions from /usr/src/UPDATING.
Hi,
Another problem is that the original file for port is in `.zip`
format. As far as I know `.zip` isn't natively supported in
FreeBSD. Should I convert that file to `.tar.gz` format and
redistribute in my site (instead of using file from VUE master
site?). Though using
Hi,
So, I'm interested in finding out if anyone knows of an Ethernet
interface which will plug into the CF socket and has drivers for
FreeBSD. Please let me know; any help would be MUCH appreciated!
Not to mentione FreeBSD drivers, but only finding an Ethernet
interface that plugs into a CF
We need to generate SSL keys for the Apache server.
I usually follow the FAQ of modssl (modssl.org); that's where I found
the most usefull sample of openssl commands. I just cut and paste.
The signing of certificate is not done by me though.
One other thing that is confusing is
Hi,
I apologize if I was not clear enough. I answer youe questions and try
to be more clear at the bottom.
I have this stupide little configuration that I cannot manage to get
working.
I have one machine a.domain.net that I want to be able to deliver
system mail (like cron and so on)
Hi,
I have this stupide little configuration that I cannot manage to get
working.
I have one machine a.domain.net that I want to be able to deliver
system mail (like cron and so on) with the following rules:
- user1 on a.domain.net has the same username as on domain.net; I
want that mail sent
Hi,
I am using nss_ldap without problem on a machine with FreeBSD 6.4
amd64.
Now I wanted to make a similar configuration with a machine running
FreeBSD 7.2 i386, but I have a problem:
- as root, getent passwd gives me the list of users in /etc/passwd and
in LDAP;
- as user. getent passwd
Bad bad bad me.
I am using nss_ldap without problem on a machine with FreeBSD 6.4
amd64.
Now I wanted to make a similar configuration with a machine running
FreeBSD 7.2 i386, but I have a problem:
- as root, getent passwd gives me the list of users in /etc/passwd and
in LDAP;
- as
Hi,
The password is hashed and some examples are:
02SvtVJnRLzuQ
42jhVP6kxUBX6
Can anyone tell me what file I would look at to see what hash
algorithm is being used to store the passwords in the table? Any
help would be great.
As a hint, to help make it easier to reply, where are the
How many people actually use it? Very few.
Out of the 12 or 15 servers I run, only one do not use stock sendmail:
the mail server. So one out of twelve is rather quite a lot...
Olivier
___
freebsd-questions@freebsd.org mailing list
Hi,
i've added the following line to my /etc/hosts:
permail.uni-muenster.de:25 permail.uni-muenster.de:443
so what i want is for freebsd to never use http, but https for that address.
unfortunately hosts doesn't seem to support this syntax.
De3finitely not. man hosts to see the
Alex,
i'm not using a webserver or anything. i'm just a regular user. the point is:
i often forget to specify https://... for that specific address in apps like
lynx or firefox. that's why the non-ssl version of that site is being loaded.
i'd like freebsd to take care of this so even if the
I am probably doing this all wrong. I have an OpenLDAP server set
up that works correctly. I wanted to be able to access it via LDAP://
from my laptop when traveling. Unfortunately, that is not working. When
An LDAP server is not something that you access through a web browser.
The naming of
Hi Carmen,
I have email clients on my laptops that can access the LDAP server when
connected via my LAN. When traveling that is not readily possible (is
it)? Therefore, how can I accomplish this or is it not possible?
Remember, I am not attempting to administer the LDAP server, but rather
Hi,
Q1: Is 26M free space on / after installing FreeBSD normal?
That is not the right question to ask :) The question would be is it
normal that / is using 430M?. It depemds what you have in / file
system. After instal, I have 271M used, but for example, my user home
directory is on a separate
I'm looking to garner production-wise operational feedback on the
commands people are using to generate their (Open)SSL cert requests
nowadays...
I usually follow what is very well explained in modssl FAQ.
Olivier
___
freebsd-questions@freebsd.org
Hi,
I have been strugling to find the correct syntax for the mysql(1)
command to connect with SSL.
My server is accepting SSL connections:
db2root: mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1
Server version:
Hi Chris,
The FreeBSD handbook section 4.5.1 describes several methods for
obtaining the ports collection including CVSup, Portsnap, and sysinstall.
Section 4.5.1 also describes how to update the ports collection, but
only for the CVSup and Portsnap methods.
Q1: How do I update the
Hi,
What is the best way of migrating users from one machine (FreeBSD
6.3) to a new machine (FreeBSD 7.2)?
I need to migrate their user account settings (shell, password,
expiry etc) and also their data that they have in their directories.
Basically:
- you need to vipw on both machine and
Hi,
All of the 200 domains on each server have thier own Real Unix user
(obviously). Once the NAS is setup, (using NFS), how do the permissions on
the NAS machine play out? i.e. when user 'hisname' logs into a server via
ftp, and uploads a file to his home directory (which is on the NAS),
Hi Kiran,
I am FreeBSD User I am using samba domain, Recently 20 day's back I have
updated ports. After updating the ports I am not able to join Windows
desktop samba domain.
I think you must give more details about your configuration. In the
message title you mention LDAP, but you don't
$ newfs -U /dev/ad2s1a
$ mount /dev/ad2s1a /target
$ cd /target
$ dump -0Lauf - /dev/ad1s1a | restore -rf -
[...]
But what does that mean? But ad2s1a has just been newfs'd - so how can
Thats ad*1*s1a that has just been formatted, not ad2...
Best,
Olivier
Hi,
For the past few months I have been researching methods to create a
storage enclosure, perferably with out spending many 10s of k's of
$'s.
You can asemble the machine yourself, I have put up a storage (for
back-up, slow SATA disks, 7.5 TB, only one quad core AMD 1.9 GHz and
4GB RAM) for
Hi,
form time to time, there appears some error / warning
messages in console, which say this:
Sep 28 00:13:40 dell kernel: aac0: **Monitor** Battery needs reconditioning.
What is your question?
It informs you you should change the battery used on the RAID
hardware, so change the battery :)
Hi,
I am trying to set up a crossover cable network between two
computers running FreeBSD 7.0.
Are you sure that your corssover cable is good? In the past, with
100Mbps Ethernet, we used crossover cables with only 2 active pairs
(other 2 may have been bad and gone unnoticed); nowdays, with
On a related note, why is slapd so damn fragile? It's a righteous pain
in the bum the way you have to run db_recover-X.Y /var/db/openldap-data
if slapd fails to start.
Yes, this is a lot of pain. I have had issues the same way and never
figured out what the reason was. /var/ is very
Hi James,
I have a FreeBSD 7.0 gateway/server with isc-dhcpd 3.1.2p1_2. Late
yesterday I began having some unique and intermittent issues.
Basically, random computers will all of a sudden lose their dhcp
leases and be unable to contact the dhcp server.
I did not see any reply to your
How to change the interfaces to not to be on same physical subnet?
Hummm, subnet is virtual, it is not physical.
To have interface on different phisical network, plug your interfaces
to different switchwes that are not interconnected one to the other.
To have a different subnet used on
Hi,
Does anyone know of command line virus scanners (open source or
commercial) that work with FreeBSD 7.2 and Exim??
Clamav, open source, in the ports, command line and daemon mode.
Kaspersky, commercial, command line and daemon mode for the mail
server package (something undocumented called
Hi Chris,
was fine until the power went out and when it booted back up it said
/dev/amrd0s1d: unexpected soft update inconsistency: run fsck
manually . the following file system had an inconsistency: ufs:
/dev/amrd0s1d (/var) Enter full pathname of shell or RETURN for
/bin/sh.
At this
Hi Colin,
Am I correct in assuming that my system has been hacked and I am running an
IRC server or something?
IRC client at least. And yes, I would think that your system has been
compromised.
Good luck,
Olivier
___
freebsd-questions@freebsd.org
Colin,
I suppose this calls for a bare-metal reinstall.
Is it worth first trying to determine how my system was broken into?
It really depends on:
- what is installed on that machine (how long it would take to
reinstall, how many softwares, ports, specially configured stuff).
- how
Hi,
1) checking enable_quotas=YES in /etc/rc.conf
2) should I try to look in /etc/fstab? There is userquota and / or
groupquota in line for some disk device in option field.
That is enough.
1) will tell you that the system is quota capable
2) will tell you what file system is quota capabel
Colin,
Be aware that what you listed below is what additional scripts the
hacker installed on your server after he broke in.
This does not tell you hwo the hacker broke in. So your server is
still subject to compromission.
Bests,
olivier
Try a find through the entire filesystem for files
Is there a command like fuser or lsof which can be used to determine
what files this perl instance is using? Any other ideas on how to figure
out what is going on here?
lsof is in the ports.
best regards,
Olivier
___
freebsd-questions@freebsd.org
Dear Mr Nakhonekham,
Just question about translated version of FreeBSD if it available in
Lao Language or not? if not how can I start to translate this FreeBSD
in to Lao.
As far as I know, there is no Lao translation of FreeBSD. Now I know
there is a Thai group of FreeBSD users, you may
Hi,
reading around the FAQ for FreeBSD mailing list, I see that the
mailing list server does some message cleaning (converting HTML to
text, etc).
From reading the list, it does a very good job and I would not mind
using the same facility for my own mail if only I knew what is being
used.
I
Hi,
With some delay...
Thanks Matthew,
What rule, in what file should I set-up to have my mail sendmail mail
server duplicate all messages to another mail server?
=20
I am in the proces sof setting-up a new mail server; in the meantime I
want all messages arriving to my current mail
servers run MICROS~1 software (which is very
well known for its high quality, haha)
Isn't that high data availability (to the others) ?
Have a nice week-end,
Olivier
___
freebsd-questions@freebsd.org mailing list
I know this is running
slapd_flags='-h \ldapi://%2fvar%2frun%2fopenldap%2fldapi/
ldap://0.0.0.0/ ldap://127.0.0.1/\;'
as is issue a command ps -aux | grep slap, hers whats the box give to me
#ps -aux | grep slap
ldap 1273 0.0 6.6 341992 7816 ?? Is4:17PM 0:00.14
#smbldap-populate -u 1 -g 1 -r 1
Populating LDAP directory for domain MYDOMAIN
(S-1-5-21-2772587264-3389604304-3649373591)
(using builtin directory structure)
adding new entry: dc=mydomain,dc=local
failed to add entry: modifications require authentication at
In fact the script
Hi,
What rule, in what file should I set-up to have my mail sendmail mail
server duplicate all messages to another mail server?
I am in the proces sof setting-up a new mail server; in the meantime I
want all messages arriving to my current mail server under sendmail to
be duplicated to the new
Rhuel,
In your starting command you have:
ldaps://192.168.5.0/ ldap://127.0.0.1/;'
This means TLS/SSL. If you don't want it, remove it from your command.
Is it necessary to have ssl/tls support?
It is up to you. TLS/SSL will bring some extra security. It may be
important if the network
Hi,
AFAIK neither of these really needs the signal quality of Cat 5 --
they both should work just fine over Cat 3 -- but surely the higher
grade wire can't hurt (and it may increase the usable DSL distance).
I think I remember that the gauge of Ethernet cable is smaller than
the one of phone
Hi,
when I look at the smblap_tools.pm at line 322 this is what it look likes
and sorry I cant understand the code:
else {
$ldap_master = Net::LDAP-new( --This is line 322
$config{masterLDAP},
port= $config{masterPort},
version = 3,
Ruel,
And yes ldap is running
#ps -aux | grep slap
That the process slapd is running does not mean you can access it.
That:
/usr/local/libexec/slapd -h ldapi://%2fvar%2frun%2fopenldap%2fldapi/ldap://
0.0.0.0/ldap://192.168.5.0/ldap://127.0
looks strange to me, I am used to someting like:
Ruel,
I tried you idea with NO SPACE between each URL but when i restart the LDAP
it does not start anymore...hmmm
what did i mess here!!??
in /etc/rc.conf I have:
slapd_flags='-h ldapi://%2fvar%2frun%2fopenldap%2fldapi/
ldaps://192.41.170.6/ ldap://192.41.170.6/;'
see the specific use
Still it does not start the LDAP, hers my /etc/rc.conf:
slapd_flags='-h ldapi://%2fvar%2frun%2fopenldap%2fldapi/ ldaps://
192.168.5.0/ ldap://127.0.0.1/;'
At this point it would be usefull that you have a look in the logs at
/var/log and see what is wrong in your command line.
It
Hi,
What commercial anti-virus would you recommand for FreeBSD 7.2?
It must have a daemon allowing on-demand scan: submit a file name to
the daemon, it has all the virus definition preloaded and can
immediately scan the file without any pre-processing time wasted.
This is to be included in
Hi Mike,
What I have are two pairs in the following format:
1.2.3.4 a.ns.example.com
5.6.7.8 b.ns.example.com
I think that what you are looking for is what is called NS reccord for
the domain ns.example.com
Good luck,
Olivier
___
Hi,
A general reply to many suggestions.
So the time it takes for the smallest Ethernet frame to get from the two
farthest nodes will determine a window in which the two most distant nodes
upon attempting a transmit can tell that a collision occurred and
retransmit.
In a case of
David,
You would need 5 boxes, the connections between each run of cable
could cause too many loss, even if the timing was not an issue.
Wire connections are not all that lossy.
You would be surprised by the impedance missmatch tests made by
cabling companies...
Meanwhile cat5 is useful
Hi Victor,
/libexec/ld-elf.so.1: /lib/libc.so.7: Undefined symbol _nsdispatch
Specifically this is thrown when trying to login (after entering login name)
on the console, ssh, ftp.
This is also thrown for fetchor for ls -l (plain ls works).
From the error message and from the diagnostic of
Hi,
2) please advice me If I buy this machine is that a wise decision or
refurbished machines are of high risk ?
You have to ponder the fact that notebook are always fragile machines:
- they are moved around often, so more subject to miss handeling (a
notebook is more likely to fall from
Hi,
My question is what the difference is between 'sa0.0' and 'sa0.[1-3]'.
I can't seem to find it documented anywhere.
From the top of my head, I think I remember devices sa0.[1-3] would
represent different compression mode.
Bests,
Olivier
___
Hi,
I would like to build a FreeBSD 7.2 server on the motherboard Asus
KFSN5-D.
It looks like the chipset is nVIDIA nForce Professional 3600, I don't
see it being supported (or not).
Before I engage in buying, I would like to make sure I'll have no
problem.
TIA,
Olivier
Brad Mettee bmet...@pchotshots.com writes:
If a system is stable and ports are up to date, serving mail web
pages as needed, is there any reason to update from this:
FreeBSD ns1.pchotshots.com 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb
24 10:35:36 UTC 2008
Hi,
Just today I found the marvel of LaTeX while looking over a quick how-to
for LaTeX.
Congratulation brother, you've seen the light :))
Now for you technical questions, Polytropon has replied.
Bests,
Olivier
___
freebsd-questions@freebsd.org
--- Start of forwarded message ---
Hi,
I am not sure if any card of the type exists, but I am looking for a
PCI-X card with external SATA connector (1 or 2) to supports port
multiplier.
Idea is to attach a bank of disk to use a backup media.
TIA,
Olivier
--- Start of forwarded message ---
Hi,
Is the port security/pgp working on amd64 system?
I copied my public and private keyrings from i386 to amd64 system and
I cannot decipher any file, it keeps on complaining that the pass
phrase is bad.
I already tried to export the key on the i386
Nikos,
My list of priorities, with 1 being the most important.
1. Price
2. Stability
As the price is the most important for you, buy any cheap switch.
Now I have had satisfaction with Dlink and Compex, maybe not among the
cheapest, but still cheap. I have had some working for 6 or 7 years
Hi,
I'm busy reading the manual on this, but am wondering if anyone has
tips and howtos available.
I took delivery of our new color laser printer, a CP1515n, HP
networked color laser. since this thing is not exactly cheap to run
I want to count pages per user, and since I have
Daniel,
I'm trying to convert all PDF files in a directory to text using
pdftotext. I tried the following command:
Aside from the syntax of the command find(1) and some article that may
be in corrupted PDF, you may consider hacking pdftotext to skip the
do not print flag in some of the PDF
Hi,
I'm looking for a way to manage my personal collection of research
articles. Ideally I'd like some way to keep records on authors,
keywords, journals, and publication years of articles (PDF files)
downloaded onto my local drive.
Certainly overkill, but dspace(.org) can keep up a digital
Since all the PDFs contain text (none are scanned images), can I
simply use some command like grep to search for text within the
collection? If so, how would I do this? Can grep read text from
within PDFs?
pdftotext, comes with the port xpdf I think
Olivier
Hi,
Samba is still only a NT4-type
DC, no Active Directory type of function (Group Policies, u...@domain
logins, kerberos, ldap, etc)
I am not sure if I understand you well, but my samba is authenticating
users agaiinst LDAP.
Best regards,
Olivier
Hi,
I am runnig FlexNet license manager on FreeBSD (6.4), this is alinux
application, but it is running smoothly.
The problem occurs sometime at stop time, it will not stop cleanly and
leave a connection in CLOSE_WAIT state. As a result, the ports are not
freed and the license managerserver
Hi,
I recently upgraded from Samba 3.0.31 to 3.3.2 on a FreeBSD 6.4
server, and since then, the Windows machines have no right to delete
files unless the directory is chmod o+w
I tried to play with map read only and 'store dos attribues but not
to avail.
My FreeBSD server is quite standard, the
Hi,
I am writing a Perl script to run on our web server. This script will
be used to create user accounts.
I can do almost every thing on the web server:
- create the home directory
- add a user in LDAP
- create the MySQL database for that user
The only thing I cannot do is to set the disk
How could I nicely and securely connect from the script on the web
server to the file server, in order to edit the quota? It should be
use rsh and .rhosts :)
I do that already, not really what I call secure ;) As I put up a new
machine, I'd prefer something else.
Olivier
use rsh and .rhosts :)
I do that already, not really what I call secure ;)
Could you please explain why it is not secure in your case?
I don't know exactly the environment in your case so i can't answer for
sure, but most probably it's perfectly secure.
Because rsh/rlogin etc. is
Well, I don't have any verified working cable of the appropriate length
so I simply switched out the cables for the main server and the backup
server. They are both cat6 cables crimped with cat5e modules by me. For
what reason (bad crimp job?) that seemed to fix the issue.
On stranded
101 - 200 of 759 matches
Mail list logo