On an 80-conductor cable:
Pri. Master: IBM 40GB drive, at highest UDMA mode
Pri. Slave: Maxtor 20GB drive, at highest UDMA mode
On a 40-conductor cable:
Sec. Master: HP CD-Writer+ 9100i, PIO4 mode
Sec. Slave: Liteon CD-ROM, PIO4 mode
Well, I tried the configuration above
I just recently got FreeBSD 5.0 and I can't get it to
install. When it's listing my devices in the very
beginning it does fine untill it hits my HP CD-Writer
Plus 9100i. Then it just freezes. Not even an error
message. If version 4.6 I at least got a non-ATA66
cable or device error, and I
On an 80-conductor cable:
Pri. Master: IBM 40GB drive, at highest UDMA mode
Pri. Slave: Maxtor 20GB drive, at highest UDMA
mode
On a 40-conductor cable:
Sec. Master: HP CD-Writer+ 9100i, PIO4 mode
Sec. Slave: Liteon CD-ROM, PIO4 mode
I was afraid that would be one of the
I just looked at the FreeBSD hardware list and saw all
those contollers there. Are any of those ISA devices
or are they all PCI?
I only have 3 PCI slots and they're all being used by
stuff I can't give up (video card, sound card, and
modem). So if they are all PCI devices will ISA
contollers
Here's my hardware setup as far as ide goes:
Primary Master - IBM 40 gig hard drive
(IC35L040AVVN07-0)
Primary Slave - Liteon CD-Rom LTN56D
Secondary Master - Maxtor 20 gig hard drive (92041U4)
Secondary Slave - HP CD-Writer Plus 9100i
When I boot up from the install cd for FreeBDS 5.0 and
it
Sorry if this gets sent twice. I sent the first one
before I did the auth code for this mailing list so I
don't think the first one got sent.
Here's my hardware setup as far as ide goes:
Primary Master - IBM 40 gig hard drive
(IC35L040AVVN07-0)
Primary Slave - Liteon CD-Rom LTN56D
Secondary
I'll start off with the error I get when I try to
install freebsd version 4.6.
acd0:read data overrun 34/0
acd0:MODE_SENSE_BIG command timeout - resetting
ata0:resetting devices ..ad0:DMA limited to UDMA33,
non-ATA66 cable or device
Now here's the part I find perplexing. I unhooked all
my newer
Okay, first off here's the error:
acd0: read data overrun 34/0
acd0: MODE_SENSE_BIG command timeout -resetting
ata0: resetting devices .. at0: DMA limited to
UDMA33, non-ATA66 cable or device
Does this mean the problem is with my hard drives and
cd drives? Here's how those are set up. 40