I have installed FreeBSD 6.2 on an HP Proliant G5 server with an E200i
Smart Controller installed. The installation was flawless.
When I reboot the server after the installation, the boot loader screen is
displayed. I press F1 and the system beeps and comes back to the boot
loader prompt.
What
Sorry if this is obvious but I just did this myself
with similar problems. Is your /boot a seperate
partition? If so, bsd will not boot. It will happily
install but will come back with a no kernel found
error or similar. I believe this is because only the
/ partition is mounted at that point.
At 10:49 AM 4/26/2007, [EMAIL PROTECTED] wrote:
I have installed FreeBSD 6.2 on an HP Proliant G5 server with an E200i
Smart Controller installed. The installation was flawless.
When I reboot the server after the installation, the boot loader screen is
displayed. I press F1 and the system
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
Jay
At 10:49 AM 4/26/2007, [EMAIL PROTECTED] wrote:
I have installed FreeBSD 6.2 on an HP Proliant G5 server with an E200i
Smart Controller installed. The installation was flawless.
When I
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
What is your type and model hard drive? Did you specify the geometry when
you ran sysinstall?
How did you partition and slice the hard
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
What is your type and model hard drive? Did you specify the geometry when
you ran sysinstall?
How did you partition and slice the hard
At 01:16 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
What is your type and model hard drive? Did you specify the geometry when
you ran
At 01:16 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
What is your type and model hard drive? Did you specify the geometry
when
you ran
At 01:31 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 01:16 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
What is your type and model hard
I have been able to make the system boot. I had to change one of the
Array options to Max Boot enabled 8gb. I found this in an older post
concerning a different controller, but it worked.
Specifically, my server is an ML350 with the E200i controller.
Thanks to everyone for your help.
Jay
On Thu, Apr 26, 2007 at 06:31:05PM -, [EMAIL PROTECTED] wrote:
At 01:16 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the C/H/S
incorrectly during setup?
Thanks,
What is
On Thu, Apr 26, 2007 at 06:31:05PM -, [EMAIL PROTECTED] wrote:
At 01:16 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the
C/H/S
incorrectly during setup?
Thanks,
What is
On Thu, 26 Apr 2007 [EMAIL PROTECTED] wrote:
On Thu, Apr 26, 2007 at 06:31:05PM -, [EMAIL PROTECTED] wrote:
At 01:16 PM 4/26/2007, [EMAIL PROTECTED] wrote:
At 12:52 PM 4/26/2007, [EMAIL PROTECTED] wrote:
Both of those checked OK. Is it possible I have specified the
C/H/S
incorrectly
13 matches
Mail list logo