On Sun, 13 Oct 2013 13:17:20 +1000, yudi v wrote:
On Mon, Sep 30, 2013 at 2:47 AM, Ian Smith smi...@nimnet.asn.au wrote:
In freebsd-questions Digest, Vol 486, Issue 7, Message: 5
On Sat, 28 Sep 2013 16:25:33 +0200 Roland Smith rsm...@xs4all.nl wrote:
On Fri, Sep 27, 2013 at 05:37:55PM
On Mon, Sep 30, 2013 at 2:47 AM, Ian Smith smi...@nimnet.asn.au wrote:
In freebsd-questions Digest, Vol 486, Issue 7, Message: 5
On Sat, 28 Sep 2013 16:25:33 +0200 Roland Smith rsm...@xs4all.nl wrote:
On Fri, Sep 27, 2013 at 05:37:55PM +1000, yudi v wrote:
Hi all,
Is it possible
In freebsd-questions Digest, Vol 486, Issue 7, Message: 5
On Sat, 28 Sep 2013 16:25:33 +0200 Roland Smith rsm...@xs4all.nl wrote:
On Fri, Sep 27, 2013 at 05:37:55PM +1000, yudi v wrote:
Hi all,
Is it possible to suspend to disk (hibernate) when using geli for full disk
encryption.
In freebsd-questions Digest, Vol 486, Issue 5, Message: 18
On Fri, 27 Sep 2013 17:37:55 +1000 yudi v yudi@gmail.com wrote:
Hi all,
Is it possible to suspend to disk (hibernate) when using geli for full disk
encryption. My set-up is listed below. So I am going to have an encrypted
On Fri, Sep 27, 2013 at 05:37:55PM +1000, yudi v wrote:
Hi all,
Is it possible to suspend to disk (hibernate) when using geli for full disk
encryption.
As far as I can tell, FreeBSD doesn't support suspend to disk on all
architectures. On amd64 the necessary infrastructure doesn't exist,
.
-- Forwarded message --
From: yudi v yudi@gmail.com
Date: Fri, Sep 20, 2013 at 7:09 PM
Subject: geli+Root on ZFS installation
To: freebsd-questions@freebsd.org
Hi,
I managed to install with geli+root on ZFS setup but have a few
questions. Most of the instructions just list
Hi,
I managed to install with geli+root on ZFS setup but have a few
questions. Most of the instructions just list commands but offer very
little explanation.
I adapted the instructions in
https://wiki.freebsd.org/RootOnZFS/GPTZFSBoot/9.0-RELEASE to suit my needs.
Here's the process I used for
Hi,
Upon trying to install FreeBSD 9.1 on a HP Proliant DL585G5
installation freezes when it comes to the point Archive Extraction
while extracting ports.
To be specific, the system freezes while extracting ports.txz at 23%
with Overal Progress being 29%.
First I thought about the installation
On 7/26/2013 12:00 PM, Ewald Jenisch wrote:
Hi,
Upon trying to install FreeBSD 9.1 on a HP Proliant DL585G5
installation freezes when it comes to the point Archive Extraction
while extracting ports.
To be specific, the system freezes while extracting ports.txz at 23%
with Overal Progress being
-using.html):
portsnap fetch
portsnap extract
Hi,
Thanks for the hint. Now I could finish the installation (which takes
like forever (speaking in terms of 2 hours which is pretty strange
given the raw power of this machine)) however after rebooting the box
behaves weird to say the last:
I
in the handbook
(
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/ports-using.html
):
portsnap fetch
portsnap extract
Hi,
Thanks for the hint. Now I could finish the installation (which takes
like forever (speaking in terms of 2 hours which is pretty strange
given the raw power
Hi All,
after using freebsd for 10 to 20 mins, Key board is getting locked.
Before this problem , i have enabled ftpd and provided root login for ftp
server access. after that I am facing this problem . but i revert back
this root access. and i stopped the ftpd service.
mouse is working
On Fri, 19 Jul 2013 18:13:07 +0530, hrkesh sahu wrote:
Hi All,
after using freebsd for 10 to 20 mins, Key board is getting locked.
Is that inside X?
Before this problem , i have enabled ftpd and provided root login for ftp
server access.
That is something you should _not_ do, especially
On Fri, 19 Jul 2013 18:13:07 +0530, hrkesh sahu wrote:
Hi All,
after using freebsd for 10 to 20 mins, Key board is getting locked.
Apart from Polytopon's good questions observations,
such as Is that inside X?
I'd also add 1 more question: Is that
A) a PS2 [or older] direct
Hi,
I got FreeBSD 10 CURRENT installed in a virtualbox on my ubuntu desktop,
had installed x11, and was working on gnome (the 3rd day of compilation
!) when I lost power ... twice in a row. The FreeBSD recovered the first
time but it doesn't look good this second time. I attach a screenshot.
John,
Can you link to the screenshots? They're stripped when you post to the
mailing list.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Wed, 17 Jul 2013 00:32:28 +0800 (CST)
chenjunbing1234 chenjunbing1...@126.com wrote:
questi...@freebsd.org
Iknowvery littleEnglish, and Iwant to learnfreebsd,I was
underftp://ftp.freebsd.org/pub/FreeBSD/doc/zh_CN.GB2312/books/handbook/above
tutorialto installand preparation, andmeta lot
script called webadmin.php.
From that the person was able to browse all folders and view all files -
and change them... not nice!
Apache runs using the www user (std installation) and all virtualhosts
share the same user, but are placed in different directories.
I need some help and pointers to what
breach where someone used a hole in an older
Joomla version and was able to install a php script called webadmin.php.
From that the person was able to browse all folders and view all files -
and change them... not nice!
Apache runs using the www user (std installation) and all virtualhosts
Hi, Reference:
From: Julian H. Stacey j...@berklix.com
Date: Wed, 17 Jul 2013 23:38:51 +0200
Julian H. Stacey wrote:
Hi, Reference:
From: Andy Wodfer wod...@gmail.com
Date: Wed, 17 Jul 2013 23:11:27 +0200
Andy Wodfer wrote:
Hi everybody!
!
This implies you cannot know in how far your system has been
compromized. I'd suggest a new installation. Make backups of
user files and configurations. Make sure you audit them (so
you won't re-install a possible backdoor after a clean install).
I need some help and pointers to what I can do
questi...@freebsd.org
Iknowvery littleEnglish, and Iwant to learnfreebsd,I was
underftp://ftp.freebsd.org/pub/FreeBSD/doc/zh_CN.GB2312/books/handbook/above
tutorialto installand preparation, andmeta lot of problems,Imade
. There
was a WARNING : WITNESS option enabled, expect reduced performance.
Don't know what that meant.
So I downloaded a 9.1 iso and ... actually I had one I'd downloaded in
March, i386, and tried to install that in a Virtual box under ubuntu.
The installation seemed OK ... but I looked up
That did it! Looks good now. The 10.0 installation completed ... but I
forgot to umount the iso image, so the installation was offered again. I
'forcibly' unmounted the iso image, as Virtual Box put it, and booted
again. Looks good. Thanks ! No I'll try to add X and some ports
Hi,
USB memstick img file is solution for me.
I try FreeBSD-8.3-RELEASE-amd64-memstick.img.
I downloaded this img file and copy to USB, not burn it to USB.
Then attach to İLO such as USB virtual image then sysinstall start, BUT I
selected installation from usb install NOT CD/DVD installation
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I tried
to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use acd0 and
cd0 as media. I got the same result.
ERROR: I'm trying to add freebsd8.3iso from ILO such as virtual drive not from
cd or dvd.
In
On 7/4/2013 4:59 PM, Emre Çamalan wrote:
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I tried
to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use acd0 and
cd0 as media. I got the same result.
ERROR: I'm trying to add freebsd8.3iso from ILO such
On 5 Jul 2013, at 00:01, bw.mail.lists bw.mail.li...@gmail.com wrote:
On 7/4/2013 4:59 PM, Emre Çamalan wrote:
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I
tried to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use
acd0 and cd0 as media. I
that FreeBSD Installation which
is overwritten by Linux installation.
In most cases: What has been overwritten is lost.
But: What has only been disallocated (data still on disk)
can _sometimes_ be recovered.
So it depends on _what_ is still left.
Anyway, do not do anything with the disk
List,
I accidentally installed a Linux variant(mint OS) on my Harddisk
where FreeBSD is installed( which contains my data).
Is there a possibility to retrieve that FreeBSD Installation which
is overwritten by Linux installation.
Any hints welcome!
Thanks
Chn
On Thu, 27 Jun 2013 07:28:49 +, KK CHN wrote:
List,
I accidentally installed a Linux variant(mint OS) on my Harddisk
where FreeBSD is installed( which contains my data).
Is there a possibility to retrieve that FreeBSD Installation which
is overwritten by Linux installation
Hi ,
I need one more help -
This is my new /etc/rtadvd.conf
--
rl0:\
:addr=fd8f:d6d0:e6e7:100:::prefixlen#64
re0:\
:addr=fd44:13de:a366:200:::prefixlen#64 \
:addr1=2001:db8::1:::prefixlen#64:vltime#12345:pltime#12345:
For
great, i managed to compile and install the custom kernel with IPFW kernel
support as discussed, thanks for your help!
i would like to optimise the kernel to be more specific to my hardware,
here is a breakdown of what i have:
https://gist.github.com/nkhine/fcbcbe36221dc39491f9
here is what is
hello,
i have a dedicated server from OVH and have updated freebsd to 9.1 and want
to enable IPFW in the kernel as this is not enabled.
the way i updated the system was to copy /boot/kernel.old to /boot/GENERIC
then followed ch25
On Sat, 8 Jun 2013 00:37:02 +0200, Norman Khine wrote:
hello,
i have a dedicated server from OVH and have updated freebsd to 9.1 and want
to enable IPFW in the kernel as this is not enabled.
Why not use the module for this? For many years now, you
do not need a custom kernel if you want to use
thanks for the quick reply
On Sat, Jun 8, 2013 at 12:54 AM, Polytropon free...@edvax.de wrote:
On Sat, 8 Jun 2013 00:37:02 +0200, Norman Khine wrote:
hello,
i have a dedicated server from OVH and have updated freebsd to 9.1 and
want
to enable IPFW in the kernel as this is not enabled.
On Sat, 8 Jun 2013 01:17:35 +0200, Norman Khine wrote:
thanks for the quick reply
You're welcome.
On Sat, Jun 8, 2013 at 12:54 AM, Polytropon free...@edvax.de wrote:
On Sat, 8 Jun 2013 00:37:02 +0200, Norman Khine wrote:
hello,
i have a dedicated server from OVH and have updated
Hi Trond,
Thanks a lot for your help and Ipv6 routing is working with FreeBSD OS.
we want to go for Ipv6 certification for our IPv6 stack.
And Ipv6 stack we want to use FreeBSD as one vendor router.
Now It will be easy for IPv6 interoperability test with freeBSD.
for Ipv6 interoperability test
On Thu, 23 May 2013 14:26+0530, hrkesh sahu wrote:
Hi Trond,
Thanks a lot for your help and Ipv6 routing is working with FreeBSD OS.
we want to go for Ipv6 certification for our IPv6 stack.
And Ipv6 stack we want to use FreeBSD as one vendor router.
Now It will be easy for IPv6
Hi,
I bought HP Elitebook 2570p(B6Q08EA). I checked everything, if it is
compatible, before I bought it. Unfortunately, I cannot install 9.1
RELEASE, nor 10.0 CURRENT. I get the following:
BTX loader 1.00 BTX version is 1.02
Consoles: internal video/keyboard
BIOS drive C: is disk0
BIOS drive
Hi,
it might be a good idea to tell us from where you booted. The internal
disk, an USB stick, a USB drive ...
And of course, what was on that media.
Erich
On Thu, 23 May 2013 13:02:37 +0200 (CEST)
Ludovit Koren ludovit.ko...@gmail.com wrote:
Hi,
I bought HP Elitebook 2570p(B6Q08EA). I
On Thu, 23 May 2013 18:39:44 +0700
erichsfreebsdl...@alogt.com(Erich Dollansky) said:
Hi,
it might be a good idea to tell us from where you booted. The internal
disk, an USB stick, a USB drive ...
I am sorry. It was USB memory stick.
And of course, what was on that media.
As I
On Wed, 22 May 2013 11:10+0530, hrkesh sahu wrote:
Hi All,
IPv4 Routing -
I disabled the DHCP from rc.conf for both the interface. but still I am not
able to route trafic from one interface to another.
rc.conf
---
hostname=idc-freebsd
Hi ,
Thanks a lot for this quick reply.
Sorry i missed the in the end while typing. It's a typo.
I provided the ouput of nestat -r and ifconfig.
netstat -r
--
routing tables -
internet :
---
destination Gateway
Flags Refs
Use
On Wed, 22 May 2013 12:38+0530, hrkesh sahu wrote:
Hi ,
Thanks a lot for this quick reply.
Sorry i missed the in the end while typing. It's a typo.
I provided the ouput of nestat -r and ifconfig.
netstat -r
--
routing tables -
internet :
---
destination
Hi Trond ,
Thanks a lot.
Now i am able to ping to other network with IPv4 address.
For IPv6 I added these lines in rc.conf -
first I included -
ipv6_gateway_enable=YES
++ Laptop1( Ipv6 address fe80::224:7eff:fee0:6b51) is connected to
interface rl0 ( ipv6 address - fe80::21f:b5ff:fe48:9f73)
On Wed, 22 May 2013 18:21+0530, hrkesh sahu wrote:
Hi Trond ,
Thanks a lot.
Now i am able to ping to other network with IPv4 address.
For IPv6 I added these lines in rc.conf -
first I included -
ipv6_gateway_enable=YES
++ Laptop1( Ipv6 address fe80::224:7eff:fee0:6b51) is connected to
Hi Trond,
Thanks a lot for a clear reply.
Could you please tell me Laptop1 ipv6 configuration details?
as laptop auto configuration will generate the LL address for a auto ipv6
configuration.
For Interface rl0 ipv6 address
ifconfig_rl0_ipv6=inet6 fd8f:d6d0:e6e7:100::101 prefixlen 64 ,
what will
On Wed, 22 May 2013 19:34+0530, hrkesh sahu wrote:
Hi Trond,
Thanks a lot for a clear reply.
Could you please tell me Laptop1 ipv6 configuration details?
as laptop auto configuration will generate the LL address for a auto ipv6
configuration.
For Interface rl0 ipv6 address
Hi All,
IPv4 Routing -
I disabled the DHCP from rc.conf for both the interface. but still I am not
able to route trafic from one interface to another.
rc.conf
---
hostname=idc-freebsd
keymap=hy.armscii-8.kbd
#ifconfig_re0=DHCP
#ifconfig_rl0=DHCP
dumpdev=NO
HI All,
I have a FreeBSD 9.1 Release installed with TWO NIC cards. I was trying to
make this FreeBSD machine as a router .
This is my rc.conf
ifconfig_rl0 = inet 192.168.100.101 netmask 255.255.255.0
ifconfig_re0=inet 192.168.200.101 netmask 255.255.255.0
On Thu, 9 May 2013 12:18+0530, hrkesh sahu wrote:
HI All,
I have a FreeBSD 9.1 Release installed with TWO NIC cards. I was trying to
make this FreeBSD machine as a router .
This is my rc.conf
ifconfig_rl0 = inet 192.168.100.101 netmask 255.255.255.0
Hi Devin,
On 12/20/12 1:10 PM, Devin Teske devin.te...@fisglobal.com wrote:
For now, people that prefer sysinstall can use my FreeBSD Druid pre-built
install media:
For 9.0:
http://sourceforge.net/projects/druidbsd/files/FreeBSD-9.0_Druid-1.0b60.iso/download
For 8.3:
On Thu, 14 Feb 2013, Rick Miller wrote:
Hi Devin,
On 12/20/12 1:10 PM, Devin Teske devin.te...@fisglobal.com wrote:
For now, people that prefer sysinstall can use my FreeBSD Druid pre-built
install media:
For 9.0:
On Thu, Feb 14, 2013 at 12:34 PM, Teske, Devin
devin.te...@fisglobal.com wrote:
On Thu, 14 Feb 2013, Rick Miller wrote:
No worries on time lapse. In fact, I had been needing to get back to you on
assuaging those 4 failed
patch hunks on your sysinstall work.
FreeBSD Druid (both 8.x and 9.x)
-Original Message-
From: vrwmil...@gmail.com [mailto:vrwmil...@gmail.com] On Behalf Of Rick
Miller
Sent: Thursday, February 14, 2013 10:39 AM
To: Teske, Devin
Cc: FreeBSD Questions
Subject: Re: about unatteneded installation
On Thu, Feb 14, 2013 at 12:34 PM, Teske, Devin
On Thu, 14 Feb 2013, dte...@freebsd.org wrote:
-Original Message-
From: vrwmil...@gmail.com [mailto:vrwmil...@gmail.com] On Behalf Of Rick
Miller
Sent: Thursday, February 14, 2013 10:39 AM
To: Teske, Devin
Cc: FreeBSD Questions
Subject: Re: about unatteneded installation
On Thu, Feb
Hi All,
I am facing a strange issue..
I installed 9.1 release and installation went successful
After boot up i got this error -
File system had an unexpected inconsistency.
ufs : /dev/ada0s1d (/var)
unknown error ; ! Help
Error - Aborting Boot
Going to single user mode.
#
Please help me
On Wed, 23 Jan 2013 19:49:13 +0530, Hrisikesh sahu wrote:
Hi All,
I am facing a strange issue..
I installed 9.1 release and installation went successful
After boot up i got this error -
File system had an unexpected inconsistency.
ufs : /dev/ada0s1d (/var)
unknown error ; ! Help
At 08:30 AM 1/23/2013, Polytropon wrote:
On Wed, 23 Jan 2013 19:49:13 +0530, Hrisikesh sahu wrote:
Hi All,
I am facing a strange issue..
I installed 9.1 release and installation went successful
After boot up i got this error -
File system had an unexpected inconsistency.
ufs : /dev
On Wed, 23 Jan 2013 10:24:38 -0600, Derek Ragona wrote:
Also if you have this in /etc/rc.conf:
dumpdev=YES
It always does a dump even on reboot, which also marks the filesystems as
dirty.
That doesn't seem to conform to what /etc/defaults/rc.conf
says:
dumpdev=NO# Device to
HP p410i Smart Array Raid Controller Card is used by HP proliant dl 580 g7,
so when i read Freebsd Hardware Compatibility page ... i saw
ciss(4) driver
includes: HP Smart Array P410i
before installation start i load this module from loader console...
loader console load ciss
OK Loading
Hi,
I have got a big computer which has got at least 4 core Hp Proliant DL580 g7
server.
And it has got HP p410i smart array RAID card.
I tried to install FreeBSD 8.2, 8.3 9.1 from DVD and bootonly cd but after
passed menu screen I got an error.
Please show me the way for solution.
I
On Thu, Jan 10, 2013 at 6:19 PM, Emre Çamalan cwe...@hotmail.com wrote:
Hi,
I have got a big computer which has got at least 4 core Hp Proliant DL580
g7 server.
And it has got HP p410i smart array RAID card.
I tried to install FreeBSD 8.2, 8.3 9.1 from DVD and bootonly cd but after
installation problem
To: cwe...@hotmail.com
CC: freebsd-questions@freebsd.org
On Thu, Jan 10, 2013 at 6:19 PM, Emre Çamalan cwe...@hotmail.com wrote:
Hi,
I have got a big computer which has got at least 4 core Hp Proliant DL580
g7 server.
And it has got HP p410i smart array RAID card.
I
On Thu, 10 Jan 2013, Emre ?amalan wrote:
Hi,
I have got a big computer which has got at least 4 core Hp Proliant
DL580 g7 server. And it has got HP p410i smart array RAID card.
I tried to install FreeBSD 8.2, 8.3 9.1 from DVD and bootonly cd but
after passed menu screen I got an error.
I have a system that boots 9.0+patches (claims to be 9.1-PRERELEASE but
that's a stretch in this case) off an ssd on sata0 - I needed some mfi
patches.
Now that mfi is working, I have a raid1 pair on the mfi controller, and
I've unpacked 9.1-RELEASE onto it using bsdinstall.
Now, the crappy
Good morning,
El 19/12/2012, a las 19:59, Devin Teske devin.te...@fisglobal.com escribió:
On Dec 19, 2012, at 10:06 AM, Egoitz Aurrekoetxea Aurre wrote:
Good afternoon,
One little question… I'm trying to have ready our new unattended FreeBSD
installation system. Until now, I have
our new unattended FreeBSD
installation system. Until now, I have been using Sysinstall scripting file
but now with 9.1 out I think it's moment to start using BSDInstaller in the
unattended installation process.
Hold on a moment. You might want to wait until 9.2. (read more below)
Well
Though I do have a need for completely unattended and/or network installs,
I don't have a need to continue with sysinstall.cfg. Whatever is done, be
sure not to hobble any new installer out of some perceived need to be
backwards compatible, or invest much time in being so. Writing and using
a
Good afternoon,
One little question… I'm trying to have ready our new unattended FreeBSD
installation system. Until now, I have been using Sysinstall scripting file but
now with 9.1 out I think it's moment to start using BSDInstaller in the
unattended installation process. I have seen the new
/ is using sysinstall
Amitabh
On Wed, Dec 19, 2012 at 11:36 PM, Egoitz Aurrekoetxea Aurre
ego...@ramattack.net wrote:
Good afternoon,
One little question… I'm trying to have ready our new unattended FreeBSD
installation system. Until now, I have been using Sysinstall scripting file
but now
On Dec 19, 2012, at 10:06 AM, Egoitz Aurrekoetxea Aurre wrote:
Good afternoon,
One little question… I'm trying to have ready our new unattended FreeBSD
installation system. Until now, I have been using Sysinstall scripting file
but now with 9.1 out I think it's moment to start using
On Thu, Dec 20, 2012 at 12:29 AM, Devin Teske devin.te...@fisglobal.comwrote:
On Dec 19, 2012, at 10:06 AM, Egoitz Aurrekoetxea Aurre wrote:
Good afternoon,
One little question… I'm trying to have ready our new unattended FreeBSD
installation system. Until now, I have been using
:
Good afternoon,
One little question… I'm trying to have ready our new unattended FreeBSD
installation system. Until now, I have been using Sysinstall scripting file
but now with 9.1 out I think it's moment to start using BSDInstaller in the
unattended installation process. I have seen the new
/xkb which did not exist at the time. I created /var/lib/xkb and
the installation went fine then. There is one file installed in this
location: README.compiled
This worked, but is it the right solution? Does anyone know what changed
maybe?
This is on 9.1-RELEASE with a portstree just updated
On Sat, 03-Nov-2012 at 18:46:04 +0100, Mehmet Erol Sanliturk wrote:
On Sat, Nov 3, 2012 at 9:54 AM, Andre Albsmeier
andre.albsme...@siemens.commailto:andre.albsme...@siemens.com wrote:
For various reasons I have to use this disk layout:
One harddisk with MBR and 3 slices on a i386 box:
On Sat, 03-Nov-2012 at 23:34:48 +0100, jb wrote:
Andre Albsmeier Andre.Albsmeier at siemens.com writes:
...
However, when pressing F3, the system of slice 2(!) is
loaded. This is due to the fact that boot1 always loads
the first active FreeBSD slice ;-(.
...
Is there no
For various reasons I have to use this disk layout:
One harddisk with MBR and 3 slices on a i386 box:
Slice 1: Windows XP :-(
Slice 2: FreeBSD 7.4-STABLE V1
Slice 3: FreeBSD 7.4-STABLE V2
The MBR is configured as:
options=packet,noupdate,nosetdrv
default_selection=F2 (Slice 2)
When booting, I
On Sat, Nov 3, 2012 at 9:54 AM, Andre Albsmeier andre.albsme...@siemens.com
wrote:
For various reasons I have to use this disk layout:
One harddisk with MBR and 3 slices on a i386 box:
Slice 1: Windows XP :-(
Slice 2: FreeBSD 7.4-STABLE V1
Slice 3: FreeBSD 7.4-STABLE V2
The MBR is
Andre Albsmeier Andre.Albsmeier at siemens.com writes:
...
However, when pressing F3, the system of slice 2(!) is
loaded. This is due to the fact that boot1 always loads
the first active FreeBSD slice ;-(.
...
Is there no chance to actually honour the fact that F3 was
pressed and
jb jb.1234abcd at gmail.com writes:
...
I do not know the story of active slice in FreeBSD, but I know that neither
Windows nor Linux require active partitions (in their jargon) to boot from any
more.
Perhaps it is time to review this requirement in FreeBSD and drop it if
possible.
Hello,
I have tried to install freebsd 9.0 into my laptop from usb flash memory(4GB).
I can only reach the first installation screen but the installation cannot
start and keeps rebooting. I have read the documents in your website and
downloaded FreeBSD-9.0-RELEASE-amd64-memstick.img
thank you a lot Steve;
it's worked very well.
Best regards
2012/9/18 Steve O'Hara-Smith at...@sohara.org
On Tue, 18 Sep 2012 14:25:03 +
ahmed elouadrhiri ahmedelouadrh...@gmail.com wrote:
Hi all;
i tried to install yuma in freebsd by the command : make freebsd=1
and it give me
Hi all;
i tried to install yuma in freebsd by the command : make freebsd=1
and it give me :
Makefile, line 14: Need an operator
Makefile, line 16: Need an operator
Makefile, line 21: Need an operator
Makefile, line 23: Need an operator
Makefile, line 43: Need an operator
Makefile, line 50: Need
On Tue, 18 Sep 2012 14:25:03 +
ahmed elouadrhiri ahmedelouadrh...@gmail.com wrote:
Hi all;
i tried to install yuma in freebsd by the command : make freebsd=1
and it give me :
Makefile, line 14: Need an operator
At a guess you need to use gmake (you may need to install it
Hi All,
Is it possible to write FreeBSD 8.x installation logs onto a resulting
FreeBSD 8.x host via sysinstall or some scripting method? I am
interested in output one sees during a normal installation plus any
warning/error conditions. Ideally, this information will end up on
the installed host
the system setup menu, the boot menu shows that freebsd90 is the first (and
only) bootable hard drive.
Yet when I try to install FreeBSD 9.0-R, FreeBSD ignores the hardware RAID
and sees the two separate drives, instead of seeing a single logical drive.
good lesson to NEVER use this
FreeBSD will use a hardware RAID device -only- if the particular type of
RAID chip/chipset/controller is known to the included device drivers.
do not use hardware RAID for such things as this is nothing else
than normal controller and BIOS/driver support.
logical drive configuration ignored by
FreeBSD 9.0-R installation
FreeBSD will use a hardware RAID device -only- if the particular type of
RAID chip/chipset/controller is known to the included device drivers.
do not use hardware RAID for such things as this is nothing else
than normal
I used 'hardware RAID' because that is -precisely- how the OP described
their equipment.
unfortunately this is true - it is DESCRIBED as such. lie is standard tool
in todays IT marketing.
What are facts:
- very few controllers actually have some RAID support. those usually have
onboard RAM
I created a RAID 1 drive in a Dell Optiplex 755, using the internal RAID
controller and two 160GB drives, naming the logical drive freebsd90.
Within the system setup menu, the boot menu shows that freebsd90 is the
first (and only) bootable hard drive.
Yet when I try to install FreeBSD 9.0-R,
From owner-freebsd-questi...@freebsd.org Fri May 18 15:12:56 2012
Date: Fri, 18 May 2012 14:58:26 -0500 (CDT)
From: tess lamont te...@sunset.tx.net
To: freebsd-questions@freebsd.org
Subject: Optiplex 755 RAID 1 logical drive configuration ignored by FreeBSD
9.0-R installation
I created
On Fri, 18 May 2012, tess lamont wrote:
I created a RAID 1 drive in a Dell Optiplex 755, using the internal RAID
controller and two 160GB drives, naming the logical drive freebsd90. Within
the system setup menu, the boot menu shows that freebsd90 is the first (and
only) bootable hard drive.
Le 27 mars 2012 21:06, Gökşin Akdeniz goksin.akde...@gmail.com a écrit :
Boot system in single mode and run fsck on all partitions of WD drive.
I hope it fixes
Hi,
Thank you for your answer, I run a fsck on all the partitions and it seems
to work.
Thanks.
ada0freebsd-boot512K
ada0freebsd-ufs 25G/exrootfs
ada0freebsd-ufs 26G/var exvarfs
ada1freebsd-ufs 135G /usr exusrfs
ada1freebsd-ufs 4G /tmp extmpfs
I commit and the installation ended with no error.
But when I
Tue, 27 Mar 2012 20:46:55 +0200 tarihinde
Kata Goto black.katag...@gmail.com yazmış:
I commit and the installation ended with no error.
But when I reboot :
could not find file system superblock
the following file system had an unexpected inconsistency
ufs /dev/ada1p2 (/tmp)
I tried many
On 03/14/2012 05:50 PM, Polytropon wrote:
On Wed, 14 Mar 2012 17:11:55 +0100, IMAP List Administration wrote:
Hello,
I've just installed 9.0-RELEASE (amd64) in a KVM/Qemo VM on debian linux,
which
is extremely painful because of the abysmal I/O performance, and would like
to
build the
On 15/03/2012 17:11, Robert Urban wrote:
I seem to have found the problem. I read somewhere that PKG_PATH should
have
the path to the top of the hierarchy, i.e., /cd/packages, and not
/cd/packages/something or /cd/packages/All, because pkg_add was capable of
adding the hierarchical
to
satisfy the dependencies using the packages on the installation DVD, which is
mounted on /cd.
I tried setting PKG_PATH to /cd/packages and to /cd/packages/All, but when I
simply try to test using, for example, pkg_add perl pkg_add simply says can't
stat package file.
I'm guessing it would
1 - 100 of 2409 matches
Mail list logo
