Panna wrote:
I've purchased a new emac with OSX 10.3.
It's soon to arrive and so I'm thinking about a good way of
interacting the emac - which will be my main desktop - with my 5.2.1
server.
Until now I used a windows laptop with xp and the files where shared
with samba.
So I thought that using
On Apr 1, 2004, at 8:40 PM, Drew Tomlinson wrote:
I haven't received any mail from any of the several FBSD lists to
which I subscribe since this morning, April 1 at around 06:00 PST. I
am receiving mail from other sources so I don't suspect my system. If
others are receiving mail, please resp
Panna wrote:
I've purchased a new emac with OSX 10.3.
...snip...
The freebsd server should act as mail and news-server and also as file
server.
Do I have to put the data on a fat32-slice?
no, use nfs
If I setup a nfs-mount on the freebsd server and copy data from OSX to
it, is the data readable
Is anyone else having the same issues that I am that are listed below? I
know that qt-x11-free-3.3.1 is looking for some sort of sound device,
and I have in my kernel file:
Device pcm0
If I run "grep pcm /var/run/dmesg.boot" I get
pcm0: port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at
device 31.5 on
I am setting up a firewall with freebsd ver. 5.2.1. In the installation guide I am
using requires 4.0 Snap Server to be installed. was unable to find it in the packages
options for ftp download.
Is Snap Serve installed by default? If not where can I find it and how do I go about
installing it
--- Feczak Szabolcs <[EMAIL PROTECTED]> wrote:
>
http://www.mail-archive.com/[EMAIL PROTECTED]/msg60154.html
>
> Im having nearly the same thing as the above thread
> ...
> Though I have RELEASE not rc,
> any solution for this yet ?
>
> I would like to use samba and ncpfs on the machine
> and lo
I'm running FreeBSD 5.2.1 on a ThinkPad T41p. I'm using XFree86
4.4.0, installed from the binaries on the XFree site (the video
card, an ATI Radeon FireGL T2, was apparently not supported with
the radeon driver shipped with 4.3).
Initially, X was working fine, with no config file at all, yet
I've
Jonathon McKitrick <[EMAIL PROTECTED]> writes:
> Workaround?
Possibly. On the server, try adding the following two lines to
/etc/ssh/sshd_config:
HostKey /etc/ssh/ssh_host_dsa_key
HostKey /etc/ssh/ssh_host_rsa_key
then HUP or restart sshd, and try to connect. Let me know how it
works out.
I'd
On Thu, Apr 01, 2004 at 05:40:37PM -0500, [EMAIL PROTECTED] wrote:
> I'm trying to install FreeBSD on a Sun Ultra 5, but I'm pretty new at this
> stuff. I've managed to get the fbsd_bootonly CD to be the startup CD, and
> it gives me 5 display options, like VT100, xterm emulator, FreeBSD
> console,
On Friday 02 April 2004 06:43 am, Leo De Geer wrote:
> I made make buildworld and make buildkernel make installkernel with
> no errors but then I did make installworld it stopped after around 1
> min with error that file dos not exist. Now I manage to do a cvsup
> back to releng5_1 but I cannot do
On Fri, 2 Apr 2004, Panna wrote:
> I've purchased a new emac with OSX 10.3.
> It's soon to arrive and so I'm thinking about a good way of interacting
> the emac - which will be my main desktop - with my 5.2.1 server.
> Until now I used a windows laptop with xp and the files where shared
> with sa
On Apr 2, 2004, at 4:23 AM, Panna wrote:
Until now I used a windows laptop with xp and the files where shared
with samba. So I thought that using an unixoid os would bring some
advantages :-)
I think that I'll use hfs+ on the emac.
[ ... ]
The freebsd server should act as mail and news-server an
On Apr 2, 2004, at 6:30 AM, Ivailo Bonev wrote:
How can i route packets from Internet to my private network without
exposed Internet address?
People cannot route traffic to your network unless you've got a
publicly routable IP address available for them to talk to. Talk to
your ISP, that is who
Ive been having the exact same issue, even started a thread on it with
no resolution yet.
Some findings I have made recently included taking a working ssh from a
bsd4.9 release box, copying it to the one that wasnt working, including
the config. That ssh also had the problem after copying. This se
I have a Dell PowerEdge 400SC and am running 5.1. I am unable to get the the
integrated audio card to work. I have added "device pcm" to my kernconf and
"snd_ich_load="YES" and "snd_driver_load="YES" to loader.conf. I still have no audio.
Here is what dmesg says:
pci0: at device 31.3 (no dri
on or about 04/01/04-19:28 f.johan.beisser wrote:
anyone actually have sound?
Sort of, if i turn the volume all the way up i can here
the shutter clicks on canon's web site. It is definatly worse than it
used to be, but not by much. It seems like this has always been a bit of
a problem; i just don
meimi <[EMAIL PROTECTED]> wrote:
Hello,
My server is down regularly. Could anyone tell what thing I should check?
Thanks
Does your system crash or shutdowns by itself.
Naveen.
Meimi
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman
Hello,
Thanks everyone.
Here is the information
FreeBSD 4.8
Server specification:
PIII1.7GHz
512MB ram
80GB harddisk
The server is used for web, mail, dns and databases (mysql and postgresql).
Recently, I have recompiled PHP with option curl and openssl added.
The server is in Equinix datacente
On Thu, Apr 01, 2004 at 08:32:25PM +0200, Peter Ulrich Kruppa wrote:
> Hi!
>
> When I click on a web radio streaming source in mozilla,
> realplayer will start but complain:
> "Some components are not availabel to provide playback of this
> presentation on your system
>
> file:///45F5C592d01"
Hello,
Thanks everyone.
Here is the information
FreeBSD 4.8
Server specification:
PIII1.7GHz
512MB ram
80GB harddisk
The server is used for web, mail, dns and databases (mysql and postgresql).
Recently, I have recompiled PHP with option curl and openssl added.
The server is in Equinix datacente
I tried this myself and it did not work.
The server is 4.9release, client is 4.9 stable. I have both base ssh and
openssh 3.8p1 installed, both of which have the same error connecting to
hosts.
--
Server config
# HostKey for protocol version 1
HostKey /etc/ssh/ssh_host_key
# HostKeys for
I have just copy my files from a bootable FreeBSD3.5 CD to a dos partition. Which
bootloader should I choose to make sure my system boots to FreeBSD?
DS
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Howdy all,
I just inherited a Micron NetFrame MV5000 (Intel 440LX, Dual PII-300; full
specs: http://support.buympc.com/apps/complist.asp?SerialNo=1300458-0001).
It has a 'RPX' module installed which enables RAID on my 8 4.3GB SCSI
drives, apparently via an AMI MegaRAID controller. I've been able
Greetings:
I have been trying to get vmware3 to run in full-screen mode under
FreeBSD 5.2.x for some time now. I have searched around for people who
are having similar issues and have had no luck with the information that
I have found.
I have done enough testing to know that the issue is not rel
Daren Desjardins <[EMAIL PROTECTED]> writes:
> The server is 4.9release, client is 4.9 stable. I have both base ssh and
> openssh 3.8p1 installed, both of which have the same error connecting to
> hosts.
OK, so 4.9-RELEASE can talk to 4.9-RELEASE and 4.9-STABLE can talk to
4.9-STABLE, but 4.9-STAB
meimi wrote:
Hello,
Thanks everyone.
Here is the information
FreeBSD 4.8
Server specification:
PIII1.7GHz
512MB ram
80GB harddisk
The server is used for web, mail, dns and databases (mysql and postgresql).
Recently, I have recompiled PHP with option curl and openssl added.
The server is in Equini
--- Feczak Szabolcs <[EMAIL PROTECTED]> wrote:
> On Fri, Apr 02, 2004 at 09:50:00AM -0800, Dave
> McCammon wrote:
> > I haven't seen anything back on this yet.
> > I upgraded to current after posting the dumps
> > (see
> >
>
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&selm=2004021
Greetings,
I have Samba installed on a Freebsd 5.1 server.
I am trying to map a share from a windows machine
so that I can copy the data. I can not change the
windows share name. It has a space in it. How
do I specify the share name in fstab.
share name: PSR COMPLETE
//[EMAIL PROTECTED]/PSR C
I wrote:
I can't get the program to link. In the output below, the things that
c-client4.a is complaining about are found in the pam and ssl libs
earlier in the line (I grep'd for a number of them, in /usr/lib/*.a, and
they were found in those two libs). I have tried many different ways of
orde
I just purchased 5.2 FreeBSD. And with my system i can not boot from
the CD. So i tried to make the floppy image and when i formatted the
floppy it is only 1.38MB and i can not place the image on the disk.
What should i do. Is there another way to do this.
- Greg
---
[This E-mail scanned for vi
Hello,
From the "messages" log, the error I found:
/kernel: arplookup xx.xx.xx.xx failed: host is not on local network
And warning I got
/kernel: WARNING: / was not properly dismounted
The first is I have got the wrong netmask, but the error is always in the
log and i don't think it is the probl
On Fri, Apr 02, 2004 at 10:15:45PM +0200, Dag-Erling Smørgrav wrote:
: Daren Desjardins <[EMAIL PROTECTED]> writes:
: > The server is 4.9release, client is 4.9 stable. I have both base ssh and
: > openssh 3.8p1 installed, both of which have the same error connecting to
: > hosts.
:
: OK, so 4.9-RE
On Sat, Apr 3, 2004, meimi clacked the keyboard to produce:
> Hello,
> From the "messages" log, the error I found:
> /kernel: arplookup xx.xx.xx.xx failed: host is not on local network
> And warning I got
> /kernel: WARNING: / was not properly dismounted
>
> The first is I have got the wrong ne
On Fri, Apr 02, 2004 at 12:51:23PM -0500, Jesse Sheidlower wrote:
>
> I'm running FreeBSD 5.2.1 on a ThinkPad T41p. I'm using XFree86
> 4.4.0, installed from the binaries on the XFree site (the video
> card, an ATI Radeon FireGL T2, was apparently not supported with
> the radeon driver shipped wit
>
> I just purchased 5.2 FreeBSD. And with my system i can not boot from
> the CD. So i tried to make the floppy image and when i formatted the
> floppy it is only 1.38MB and i can not place the image on the disk.
> What should i do. Is there another way to do this.
On what system did you do t
On Fri, 2 Apr 2004 16:20:41 -0500 (EST), you wrote:
>> I just purchased 5.2 FreeBSD. And with my system i can not boot from
>> the CD. So i tried to make the floppy image and when i formatted the
>> floppy it is only 1.38MB and i can not place the image on the disk.
>> What should i do. Is ther
Hello,
> What is the output of uname -a?
FreeBSD cp.laws.ms 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Fri May 23 11:13:23
CDT 2003
> Are you patched to the latest security release for 4.8 (p.16 or so)? PHP
has been causing people problems lately (see the archives for this list back
30-60 days), could i
If it's a zero channel RAID controller, it's probably not supported. I know
the Mylex Zero channel ones were very popular in this generation of machine
so that's the first thing I'd check. If the SCSI cable to your array hooks
up to the onboard controller, its zero channel (or something equally
uns
Hello,
This is an automated reply message. If you received email, bulk email or SPAM from
[EMAIL PROTECTED], please rest assured that it was not sent from us as we've never
created or used that email address. Most likely it was sent from someone who is using
the address illegally or fraudulent
>
> No this happens when i format the disk on Microsoft and nothing else all
> the disks are only 1.38mb. Is there another way to do it without
> formatting the disk through windows before adding the image. I have tried
> multiple disks and they all format with only 1.38mb left.
I usually forma
I've run into the following problem with my ports collection. Whatever
port I'm trying to install the process stops returning this:
cd /path/to/some/port
make install
... skipped ...
make all-recursive
Making all in lib
cd: can't cd to lib
*** Error code 1
Stop in /usr/ports/g
>
> On Fri, 2 Apr 2004 16:20:41 -0500 (EST), you wrote:
>
> >> I just purchased 5.2 FreeBSD. And with my system i can not boot from
> >> the CD. So i tried to make the floppy image and when i formatted the
> >> floppy it is only 1.38MB and i can not place the image on the disk.
> >> What should
On Thu, Apr 01, 2004 at 10:44:12PM -0800, Paul G. LeDuc wrote:
> Is there a way to restore the make binary from the install CD without having
> to re-install the whole OS? I have had a problem with qnu make and want to
> restore the base binary if possible. Thank you for your assistance.
The ba
On Thu, Apr 01, 2004 at 10:20:16PM -0500, Shawn Guillemette wrote:
>
>
>
> installing ImageMagick
>
> cd to /usr/ports/graphics/ImageMagick
> ran make
> ran make install and get this ...
> /usr/ports/graphics/ImageMagick# make install
> ===> Patching for ImageMagick-5.5.7.16
> ===> Applying
[EMAIL PROTECTED] writes:
> It has a 'RPX' module installed which enables RAID on my 8 4.3GB SCSI
> drives, apparently via an AMI MegaRAID controller. I've been able to get
> into the MegaRAID bios setup and configure an initialize a RAID volume,
> but FBSD can't find it.
>
> I've installed FBSD
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that at
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
> Gee, I have made a lot of bootable floppies - we used to distribute
> our system on floppy+DAT tape - and had to format all of the floppies
> in order to write boot images to them. Sometimes we even had to reformat
> floppies that were preformatted from the vendor.
If you choose to waste your t
On Friday 02 April 2004 16:42, Shaun T. Erickson wrote:
> I can't get the program to link. In the output below, the things that
> c-client4.a is complaining about are found in the pam and ssl libs
> earlier in the line (I grep'd for a number of them, in /usr/lib/*.a, and
> they were found in those
Reading from the FreeBSD handbook on "Using the Ports Collection" leaves me a
bit confused wrt CVSup and portupgrade... do these utilities accomplish the
same thing?
Thanks,
Jay
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listin
On Fri, Apr 02, 2004 at 07:27:31PM -0600, Jay Moore wrote:
> Reading from the FreeBSD handbook on "Using the Ports Collection" leaves me a
> bit confused wrt CVSup and portupgrade... do these utilities accomplish the
> same thing?
No, cvsup updates the files that make up the ports collection,
po
On Fri, Apr 02, 2004 at 07:27:31PM -0600, Jay Moore wrote:
> Reading from the FreeBSD handbook on "Using the Ports Collection" leaves me a
> bit confused wrt CVSup and portupgrade... do these utilities accomplish the
> same thing?
>
> Thanks,
> Jay
> _
On Friday 02 April 2004 07:32 pm, Kris Kennaway wrote:
> > Reading from the FreeBSD handbook on "Using the Ports Collection" leaves
> > me a bit confused wrt CVSup and portupgrade... do these utilities
> > accomplish the same thing?
>
> No, cvsup updates the files that make up the ports collection
Malcolm Kay wrote:
Maybe it is OK but to me the -static option at the end of the command looks
strange. And I know the documentation says that mostly the command line order
doesn't matter; but try it near the beginning.
Several of us tried and failed to get it to link statically in various
ways
At 11:12 AM 4/2/2004, meimi wrote:
Actually, what I want to know is the general steps for finding the problems.
Step #1 - Look in the message log (/var/log/messages), and ideally a copy
of the console output, to see why you server stopped running. (or if your
server stopped running)
The latter
On Fri, 2 Apr 2004 02:14 pm, Kris Kennaway wrote:
> There are two errors there. Probably what you intended was for
> MASTER_SITE_BACKUP to be set to ftp://ftp.filearena.net/..., but
> comments are not ignored when doing line continuations, so the
> variable is set to the literal next line, and th
On Sat, Apr 03, 2004 at 12:13:30PM +0930, Brian Astill wrote:
> On Fri, 2 Apr 2004 02:14 pm, Kris Kennaway wrote:
>
> > There are two errors there. Probably what you intended was for
> > MASTER_SITE_BACKUP to be set to ftp://ftp.filearena.net/..., but
> > comments are not ignored when doing line
I'm considering using HP Proliant DL360 and 380 G3 servers for an
high-reliability server project. As such I want to monitor at least two main
failure conditions: hard disk and power supply. The Smart Array driver
(ciss) works great in logging a drive failure. But I have found no kernel or
port too
From: "dave" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 01, 2004 3:11 PM
Subject: pkgtools.conf entry for samba
> Hello,
> Does anyone have a pkgtools.conf entry for samba? I'm trying to update
> mine, but i can not figure out how to make it stop giving me the dialog
>
Hello,
Does anyone have a howto for getting the samba port configured for
jailed use? I've tried an install with the jail patch, but it blew out
stating that a jail had to be configured. Has anyone got samba working under
this configuration?
Thanks.
Dave.
__
I am currently upgrading a Sparc64 system from 5.1 to 5.2.1. buildworld was
successful, as well as the build and install of the kernel. After a
reboot, I ran installworld and received the following error message:
===> bin/csh
install -s -o root -g wheel -m 555 csh /bin
install -o root -g wheel
Due to the large amount of spam I've been receiving to this e-mail address,
it is not being read anymore. If you want to reach Stan Grishin, please use
the online form at www.buddypeople.com/contactus.asp
___
[EMAIL PROTECTED] mailing list
http://lists.fr
>
> > Gee, I have made a lot of bootable floppies - we used to distribute
> > our system on floppy+DAT tape - and had to format all of the floppies
> > in order to write boot images to them. Sometimes we even had to reformat
> > floppies that were preformatted from the vendor.
> If you choose to
I am seeing this all of a sudden (after a portupgrade -afRr):
> /usr/local/bin/perl5.8.2
/usr/libexec/ld-elf.so.1: /usr/local/bin/perl5.8.2: Undefined symbol
"PL_exit_flags"
>
Any ideas what is going on and how I can fix it?
a "make test" in the perl5.8 port/ area runs fine...
H
___
I've a couple of systems running FreeBSD 4.9; they all share /usr and
anything below by nfs. There are (at less) two applications that do not
run or do not run correctly on one distinguished system, but correctly on
each other machine.
One application is mozilla; it stops shortly after invocation
101 - 165 of 165 matches
Mail list logo
