Ok, I think its best I just order a Intel MT card with the low profile
PCI-X adapter instead of flapping about with these riser cards and
then just use 6-stable. All getting quite confusing.
On 04/07/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
Correct, it will not fit - unless you order the
Mike Loiterman wrote:
I just upgrade to 6.1 p2 with the Sendmail security update, but my Sendmail
version remains unchanged at 3.13.6. Shouldn't it have been bumped to
3.13.7?
If you look at the patch
http://security.FreeBSD.org/patches/SA-06:17/sendmail.patch
it does not bump the version.
Hi
kern.clockrate: { hz = 100, tick = 1, profhz = 1024, stathz = 128 }
I'm going to see if it's possible to disable USB from the BIOS later
today, if not, can i disable the USB devices in the kernel?
Med vänliga hälsningar
Stefan Midjich aka nocturnal
[Swehack] http://swehack.se
On Tuesday 04 July 2006 03:49, perikillo wrote:
Hi people.
I have some problems on my network, and i want to use my freebsd
box to see if i can find the problems on my network, we have two
networks in two countrys connected by a private link, but i have seen
just a couple a weeks ago
Mark Moellering wrote:
I have a problem which I think must be simple, I just can't figure out
exactly what I need to do. I have a gateway / firewall (freebsd 6.1) with 3
nic cards. I just added the third card, rl1, which I have attached to a
wireless access point.
I can ping the access
I want to change a string in a number of html files (recursive)
In a linux group I got this line:
#find /dir/to/htmlfile -name *.html -exec perl -p -i -e
s/nagual.st/nagual.nl/g; {} \;
This gives me an error unknown option and does not work.
Doing a: perl -p -i -e s/nagual.st/nagual.nl/g; *
#find /dir/to/htmlfile -name *.html -exec perl -p -i -e
s/nagual.st/nagual.nl/g; {} \;
You should escape the * that you pass to find:
-name \*.html
Most probably.
olivier
___
freebsd-questions@freebsd.org mailing list
On Tuesday 04 July 2006 09:57, nocturnal wrote:
Hi
kern.clockrate: { hz = 100, tick = 1, profhz = 1024, stathz = 128 }
I'm going to see if it's possible to disable USB from the BIOS later
today, if not, can i disable the USB devices in the kernel?
are you sure you have to?
Try vmstat
Hello,
I have a problem with pkgdb that I am not able to solve on my own.
root:newmail 10:26 /usr/ports/sysutils/portupgrade # pkgdb -fu
--- Updating the pkgdb
[Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ...
uninitialized constant PkgDB::BDB: Cannot update the pkgdb!]
So far I
Hi
This is what i get, i'm afraid i'm not good at interpreting the results.
procs memory pagedisks faults cpu
r b w avmfre flt re pi po fr sr ad4 ad6 in sy cs us
sy id
1 5 0 274324 36436 26 0 0 0 50 27 0 0 242 149
I think your trying to second-guess very simple instructions and making
things very
hard for yourself. I'll try to explain one last time then I'll throw my
hands up in
the air
The HP DL320 G4 slots, whether PCI-X or PCI Express, to be accessible,
MUST USE A RISER CARD. HP has TWO different
On Tuesday 04 July 2006 11:40, nocturnal wrote:
Hi
This is what i get, i'm afraid i'm not good at interpreting the results.
procs memory pagedisks faults cpu
r b w avmfre flt re pi po fr sr ad4 ad6 in sy cs us
sy id
1 5 0
Ted,
Apoligises for being difficult, I must be suffering from my super
early mornings and information overload.
Thank you for explaining it, my dealer has picked up on the fact that
I'll require the PT instead of MT card that I suggested.
Thanks again for your help, what would be the best way
Hi
The -m argument exists in 5.3-RELEASE, thank you. I've attached one file
with -mio and the other without. With -mio it just output some extra
stuff at the beginning so i don't know how much it matters or maybe i
did something wrong.
Med vänliga hälsningar
Stefan Midjich aka nocturnal
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Atom Powers
Sent: Monday, July 03, 2006 5:40 PM
Cc: freebsd-questions@freebsd.org
Subject: Re: shell scripting: help appreciated
On 7/3/06, [EMAIL PROTECTED]@mgedv.net [EMAIL PROTECTED] wrote:
On Tuesday 04 July 2006 07:01, [EMAIL PROTECTED] wrote:
Hi folks,
I'm facing some troubles with mail server on a busy slow link.
I'm getting a lot of sendmail: SYSERR: collect: read timeout on
connection from entries in the logs.
I found this page showing an workaround
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Parv
Sent: Monday, July 03, 2006 7:50 PM
To: [EMAIL PROTECTED]@mgedv.net
Cc: freebsd-questions@freebsd.org
Subject: Re: shell scripting: help appreciated
in message [EMAIL PROTECTED],
wrote [EMAIL
bsd wrote:
Hello,
I have a problem with pkgdb that I am not able to solve on my own.
root:newmail 10:26 /usr/ports/sysutils/portupgrade # pkgdb -fu
--- Updating the pkgdb
[Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ...
uninitialized constant PkgDB::BDB: Cannot update the
Hello gurus,
my logs full of hundreds of these lines..i starts since few days and up to
day ..
-
Jul 2 00:00:03 server mysqld[28598]: warning: /etc/hosts.allow, line 25:
can't verify hostname: getaddrinfo(host73.hostname_net, AF_INET) failed
Jul 2 00:00:27 server sshd[83738]:
First thoughts is you are under attack and hosts.allow is
doing it's job of denying access.
Add the ip address from the warning message to your firewall
to stop those attack packets from entering your system.
Good chance attack packets are spoofed.
-Original Message-
From: [EMAIL
Hi,
I just tried to install a clean copy of freebsd 6.1 on a Ibm Thinkpad
600X Laptop.
There is a Xircom Cardbus network/modem card in it.
When the system boots, the modem gets detected, the network card also
(as DC0) but I get a bunch of these messages:
CARDBUS1 Ressource Not Specified
On Tuesday 04 July 2006 13:10, nocturnal wrote:
Hi
The -m argument exists in 5.3-RELEASE, thank you. I've attached one file
with -mio and the other without. With -mio it just output some extra
stuff at the beginning so i don't know how much it matters or maybe i
did something wrong.
I see
Hi
Yes i suspected a bug when i first saw this because of what you say.
100% CPU usage should be noticed. I found out by accident looking at
top. I'll see if we can update the system, it's not high priority right
now but thank you all for your help.
Med vänliga hälsningar
Stefan Midjich
Olivier Nicole writes:
#find /dir/to/htmlfile -name *.html -exec perl -p -i -e
s/nagual.st/nagual.nl/g; {} \;
You should escape the * that you pass to find:
-name \*.html
Or quote it:
find /dir/to/htmlfile -name *.html
Robert
Hi,
I'm trying to install graphics/gnash with the firefox plugin but it
keeps on saying:
Error: shared library gtkglext-x11-1.0.2 does not exist
I tried to search the ports directory for gtkglext-x11 but I can't find
any
I'm using FreeBSD 6.1-RELEASE-p1
Thanks in advance for your guidance...
Hi,
6.1-RELEASE-p2
I recently used sysinstall to install cups-1.1.23 via packages/ftp/
Main Site.
That adds ghostscript-gnu and xorg-libraries as dependencies.
That's not what I wanted, I don't use a gui, so I selected
ghostscript-gnu-no-X11.
That didn't work, it installed ghostscript-gnu
Andrea Venturoli [EMAIL PROTECTED] writes:
Lowell Gilbert wrote:
I believe the first one is a known problem, any more info?
Any hint on the second?
Not really; seems strange.
Are you able to fsck the snapshot?
Hm... guess so.
Is it fsck /var/local/snapmnt?
Assuming that is the
System Info:
FreeBSD seibercom.net 6.1-STABLE FreeBSD 6.1-STABLE #0: Sat May 13 19:46:07
EDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SEIBERCOM i386
I am not sure if this is the proper forum for this question or not, but I
might as well start here.
I am trying to get the KDE text to
Problem is, that's a bit of a niche so it may take a while to answer,
but as a generalized FreeBSD form, and that being related to use on a
FreeBSD system, It's a good question.
Not to mention, I've not had time to look at it, but since I have
blind family, I'd like to look at the screen readers
Hi,
I need to get mod_proxy running under apache and can't seem to find the
ports. Anyone knows where mod_proxy is located?
Thanks.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
npy wrote:
I need to get mod_proxy running under apache and can't seem to find the
ports. Anyone knows where mod_proxy is located?
Which version of apache? For apache 2.2 check Makefile.doc:
To enable a module category: WITH_CATEGORY_MODULES
To disable a module category:
npy wrote:
Hi,
I need to get mod_proxy running under apache and can't seem to find the
ports. Anyone knows where mod_proxy is located?
Thanks.
Built in?
[EMAIL PROTECTED]/usr/ports/www/]
httpd -v
Server version: Apache/1.3.36 (Unix)
Server built: May 29 2006 21:43:28
[EMAIL
In apache13 it comes preinstalled as default.
May be same in apache22.
look in httpd.config for mod statements to verify what is
preinstalled.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of npy
Sent: Tuesday, July 04, 2006 11:45 AM
To:
On 7/4/06, bsd [EMAIL PROTECTED] wrote:
Hello,
I have a problem with pkgdb that I am not able to solve on my own.
root:newmail 10:26 /usr/ports/sysutils/portupgrade # pkgdb -fu
--- Updating the pkgdb
[Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ...
uninitialized constant PkgDB::BDB:
On 7/3/06, bsd [EMAIL PROTECTED] wrote:
Mmmh...
I have followed your instructions and am still facing a problem :
root 0:34 ~ # portversion -l
[Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ...
[Rebuilding the pkgdb format:bdb_btree in /var/db/pkg ...
uninitialized constant PkgDB::BDB:
Hi list
I am installing SNORT 2.4.5 to log into a MySQL-5.1 database. snort logs
are being stored fine into the db, but whe the system start snort fails
because of this: snort[396]: FATAL ERROR: database: mysql_error: Can't
connect to local MySQL server through socket '/tmp/mysql.sock' (2)
I have a freebsd system which is on a private network, there is no path to the
internet. I am looking for methods to update the system to a new version level
under these situations. Is there someway to synchronize the sources by burning
a CD, without being able to employ CVSsup or similar? I
César Amaya wrote:
Hi list
I am installing SNORT 2.4.5 to log into a MySQL-5.1 database. snort logs
are being stored fine into the db, but whe the system start snort fails
because of this: snort[396]: FATAL ERROR: database: mysql_error: Can't
connect to local MySQL server through socket
Raymond Owens [EMAIL PROTECTED] wrote:
I have a freebsd system which is on a private network, there is no path
to the internet. I am looking for methods to update the system to a new
version level under these situations. Is there someway to synchronize the
sources by burning a CD, without
On Tuesday 04 July 2006 19:58, Raymond Owens wrote:
I have a freebsd system which is on a private network, there is no path to
the internet. I am looking for methods to update the system to a new
version level under these situations. Is there someway to synchronize the
sources by burning a CD,
Hi!
I have c:/ (no partition) with Windows sistem,
d:/ partition - NTFS and unformated partition for second sistem -
FreeBSD.
When I put instalation CD and boot computer from cd freebsd I get
error masage BTX HALTED. Before this is all ok.
Cant i have two sistems Window
On Tuesday 04 July 2006 21:03, Nikos Vassiliadis wrote:
*) that is any medium providing unix file system characteristics
No, that's not true. There are only plain files and directories in /usr/src.
There are no soft links, as I was expecting. So you can use any filesystem.
Any filesystems that
--- Olivier Nicole [EMAIL PROTECTED] wrote:
#find /dir/to/htmlfile -name *.html -exec perl -p -i -e
s/nagual.st/nagual.nl/g; {} \;
You should escape the * that you pass to find:
-name \*.html
Or
-name *.html
__
Do You Yahoo!?
Tired of
Kevin Kinsey wrote:
César Amaya wrote:
Hi list
I am installing SNORT 2.4.5 to log into a MySQL-5.1 database. snort
logs are being stored fine into the db, but whe the system start
snort fails because of this: snort[396]: FATAL ERROR: database:
mysql_error: Can't connect to local MySQL
The simplest way is to take the ISO of the release you want to load and
install as an upgrade. You will need to remove or move /usr/src first as
an upgrade won't overwrite it if it is found.
-Derek
At 11:58 AM 7/4/2006, Raymond Owens wrote:
I have a freebsd system which is on a
Rainer Heesen wrote:
[EMAIL PROTECTED] ~# echo test /dev/ulpt0
bash: /dev/ulpt0: Device busy
so I think it is not a cups problem, but what kind of program make the usb
device busy?
It can't be any other program if fstat is not reporting anything. I've
been reading on the usb printer
On Tuesday 04 July 2006 17:12, Gerard Seibert wrote:
System Info:
FreeBSD seibercom.net 6.1-STABLE FreeBSD 6.1-STABLE #0: Sat May 13 19:46:07
EDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SEIBERCOM i386
I am not sure if this is the proper forum for this question or not, but I
might as
Hello,
I have noticed that the PR plots in [1] seem to be wrong. Some of the
graphs has negative values (take for instance a look at the plot of
analyzed reports in the last 30 days).
Moreover, the graphs are different of those shown in [2]. Taking a look
at the Project Lifetime plot, it seems
On Tuesday 04 July 2006 17:48, Danny Pansters wrote:
On Tuesday 04 July 2006 17:12, Gerard Seibert wrote:
System Info:
FreeBSD seibercom.net 6.1-STABLE FreeBSD 6.1-STABLE #0: Sat May 13
19:46:07 EDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SEIBERCOM
i386
I am not sure if this
hi guys,
how do i enable mod_ssl in apache 2.2 in my freebsd 6.1 box so that it
listens to port 443 instead of the default port 80? is there a special
command like the a2enmod ssl in debian?
TIA
___
freebsd-questions@freebsd.org mailing list
On Tue, 4 Jul 2006 15:10:05 -0400 (EDT)
Peter [EMAIL PROTECTED] wrote:
--- Olivier Nicole [EMAIL PROTECTED] wrote:
#find /dir/to/htmlfile -name *.html -exec perl -p -i -e
s/nagual.st/nagual.nl/g; {} \;
You should escape the * that you pass to find:
-name \*.html
Or
On 7/4/06, Nikos Vassiliadis [EMAIL PROTECTED] wrote:
On Tuesday 04 July 2006 03:49, perikillo wrote:
Hi people.
I have some problems on my network, and i want to use my freebsd
box to see if i can find the problems on my network, we have two
networks in two countrys connected by a
On Tuesday 04 July 2006 18:11, jan gestre wrote:
hi guys,
how do i enable mod_ssl in apache 2.2 in my freebsd 6.1 box so that it
listens to port 443 instead of the default port 80? is there a special
command like the a2enmod ssl in debian?
I think you just change the 'Listen' directive in
I believe that 3.5.1_1 has been restored, at least to ftp[24].freebsd.org. I
installed 3.5.2 in mid June. I got caught upgrading a workstation so I am doing
a build which I am 48 hours into :)
I am not sure why 3.5.2 was removed; ; I had assumed it was to upload 3.5.3
which has been released.
I'm running FBSD 6.1 release and just got a new printer for my birthday, it's
an HP Officejet 4315 all-in-one, I used to have an old HP Deskjet 842c and
worked fine using apsfilter but I can't make this one print, I don't see any
drivers for it using apsfilter either, is there a way to make
On Tuesday 04 July 2006 20:35, E. J. Cerejo wrote:
I'm running FBSD 6.1 release and just got a new printer for my
birthday, it's an HP Officejet 4315 all-in-one, I used to have an
old HP Deskjet 842c and worked fine using apsfilter but I can't
make this one print, I don't see any drivers for
César Amaya wrote:
Kevin Kinsey wrote:
César Amaya wrote:
Hi list
I am installing SNORT 2.4.5 to log into a MySQL-5.1 database. snort
logs are being stored fine into the db, but whe the system start
snort fails because of this: snort[396]: FATAL ERROR: database:
mysql_error: Can't connect
On Tuesday 04 July 2006 20:53, E. J. Cerejo wrote:
Anish Mistry [EMAIL PROTECTED] escreveu: On Tuesday 04
July 2006 20:35, E. J. Cerejo wrote:
I'm running FBSD 6.1 release and just got a new printer for my
birthday, it's an HP Officejet 4315 all-in-one, I used to have
an old HP Deskjet
Hi guys,
Thanks for the pointer. Got it working now.
The steps are:
cd /usr/ports/www/apache22
export WITH_PROXY_MODULES=1
make install
Thanks!
Erik Norgaard wrote:
npy wrote:
I need to get mod_proxy running under apache and can't seem to find the
ports. Anyone knows where mod_proxy is
59 matches
Mail list logo
