Hello,
I hope some one will me on my problem.
My friends has and existing DHCP server and squid proxy server running both
in freebsd.We purchased a new desktop PC, we gave it a permanent IP using
the DHCP server and we edit the config file in /usr/local/etc/dhcp.conf we
add this at the bottom
On Mon, 2008-04-14 at 14:43 +0800, Ruel Luchavez wrote:
Hello,
I hope some one will me on my problem.
My friends has and existing DHCP server and squid proxy server running both
in freebsd.We purchased a new desktop PC, we gave it a permanent IP using
the DHCP server and we edit the config
Hi, All.
Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs,
but freeze on begin chanel tunin...
How to test tuner and drivers works or not.
--
With all regards, Victor M. Blood. mailto: [EMAIL
How to reload the dhcpd? what would be the command fo it?
Best regards..
On Mon, Apr 14, 2008 at 3:12 PM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
add this at the bottom
host test {
hardware ethernet 00:1d:27:64:e1:af; [this is the physical address of
new
PC]
fixed address
How to reload the dhcpd? what would be the command fo it?
/usr/local/etc/rc.d/isc-dhcpd restart
Best regards..
On Mon, Apr 14, 2008 at 3:12 PM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
add this at the bottom
host test {
hardware ethernet 00:1d:27:64:e1:af; [this is the physical address
How to reload the dhcpd? what would be the command fo it?
Best regards..
On the freebsd server use:
/usr/local/etc/rc.d/isc-dhcpd restart
On a windows box do :
Start -- run
Type cmd klik ok
Then you'll get a dos box
ipconfig /release
This releases the ip adres
ipconfig /renew
try to
On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
Hi, All.
Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs,
but freeze on begin chanel tunin...
How to test tuner and drivers works or not.
On 14/04/2008, Robert Huff [EMAIL PROTECTED] wrote:
Erich Dollansky writes:
this is an English speaking list.
Says who?
The handbook.
___
freebsd-questions@freebsd.org mailing list
Hallo,
How to restart the squid proxy server in freebsd?
Thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Thanks Johan Puchar, your advise is very effective.
again thank you..
On Mon, Apr 14, 2008 at 3:36 PM, Johan Hendriks [EMAIL PROTECTED] wrote:
How to reload the dhcpd? what would be the command fo it?
Best regards..
On the freebsd server use:
/usr/local/etc/rc.d/isc-dhcpd restart
On
-BEGIN PGP SIGNED MESSAGE-
Hash: RIPEMD160
Ruel Luchavez wrote:
Hi,
I have BIND DNS Server in my freebsd, i keep on searching in google on how
to restart it?
is there a command to restart it like the squid and dhcp? or there is no
command for it?
That is somewhat different to what
Hallo,
How to restart the squid proxy server in freebsd?
Thanks...
Use the following command
/usr/local/etc/rc.d/squid restart
Regards,
Johan Hendriks
Double L Automatisering
___
freebsd-questions@freebsd.org mailing list
I have BIND DNS Server in my freebsd, i keep on searching in google on
how
to restart it?
is there a command to restart it like the squid and dhcp? or there is
no
command for it?
You might like to try
# rndc reload
Cheers
Thanks in advanced..
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andy
Christianson
Sent: Thursday, April 10, 2008 6:35 AM
To: freebsd-questions@freebsd.org
Subject: Poweredge 1950 IPMI
A while back I posted about reading the CPU temperature on a Dell
Poweredge
On Monday 14 April 2008 11:02:43 Ruel Luchavez wrote:
I have BIND DNS Server in my freebsd, i keep on searching in google on how
to restart it?
is there a command to restart it like the squid and dhcp? or there is no
command for it?
If you start reading here:
Hi,
I have BIND DNS Server in my freebsd, i keep on searching in google on how
to restart it?
is there a command to restart it like the squid and dhcp? or there is no
command for it?
Thanks in advanced..
___
freebsd-questions@freebsd.org mailing list
lysergius2001 wrote:
Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and
now have a continuous interrupt storm on IRQ17. This is a shared IRQ for
ath0 and echi0. Never saw this on 6.3??? Any suggestions?
Just another contribution to the collection of interrupt storms
On 14.04.2008, Da Rock wrote:
On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
Hi, All.
Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv runs,
but freeze on begin chanel tunin...
How to test
Subject: Re: Interrupt storm with 7.0
On Sunday 13 April 2008 14:41:51 lysergius2001 wrote:
Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and
now have a continuous interrupt storm on IRQ17. This is a shared IRQ for
ath0 and echi0. Never saw this on 6.3??? Any
On Monday 14 April 2008 11:36:43 Jan Henrik Sylvester wrote:
lysergius2001 wrote:
Recently installed 7.0-RELEASE on an i386 as upgrade from 6.3-RELEASE and
now have a continuous interrupt storm on IRQ17. This is a shared IRQ for
ath0 and echi0. Never saw this on 6.3??? Any suggestions?
I have BIND DNS Server in my freebsd, i keep on searching in google on how
to restart it?
/etc/rc.d/named restart
is there a command to restart it like the squid and dhcp? or there is no
command for it?
Thanks in advanced..
___
On Mon, 2008-04-14 at 02:07 -0700, Ted Mittelstaedt wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andy
Christianson
Sent: Thursday, April 10, 2008 6:35 AM
To: freebsd-questions@freebsd.org
Subject: Poweredge 1950 IPMI
A while
I used the patches and documents from qmail.jms1.net and built my own
qmail, and it works well. I think a port that tracks qmail + jms1's
current combined patch set would be well received.
BTW, I copied the maintainer of the qmail port on my earlier message,
and it eventually bounced:
Hi all,
(This may actually be a question for the dtach people).
I've recently been using dtach (basically the detach function of
screen) over SSH to instruct my freeBSD machine to perform long tasks
even after I disconnect from it. It's worked great: I run SSH and
connect to my box, execute
Written by Gaëtan Podevijn on 04/13/08 08:14
Hello,
I'm trying to configure my Acer Aspire 5024wmli wireless card (pciconf
-lv told me device: BCM43XX Broadcom 802.11b/g) but without any success.
I use ndis with windows drivers and it is correctly loaded:
kldstat
Id Refs Address
Edward Ruggeri wrote:
Hi all,
(This may actually be a question for the dtach people).
I've recently been using dtach (basically the detach function of
screen) over SSH to instruct my freeBSD machine to perform long tasks
even after I disconnect from it. It's worked great: I run SSH and
Jeff Dickens wrote:
I used the patches and documents from qmail.jms1.net and built my own
qmail, and it works well. I think a port that tracks qmail + jms1's
current combined patch set would be well received.
For what is worth the mail/qmail-tls port says it supports smtp-auth. I
dont use
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Furthermore I'm now physically separate from the machine, and
have been relying on a (non-computer-literate) colleague with
access to its console server to try and help.
At 09:35 AM 4/14/2008, Jesse Sheidlower wrote:
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Furthermore I'm now physically separate from the machine, and
have been relying on a (non-computer-literate) colleague with
On Mon, Apr 14, 2008 at 08:29:43AM -0400, Andy Christianson wrote:
snip
So, any ideas on how to read the CPU temperature from this machine?
Thanks in advance for any advice.
My experience is that it's more important to be able to read
fan rpm on the CPU heatsink. If fan rpm is 0,
On Sun, Apr 13, 2008 at 01:02:45PM -0600, Eric wrote:
hello,
does anyone know what I can do to fix the following problem? Every time
my FreeBSd 6.2 machine reboots, none of the scripts in the
/usr/local/etc/rc.d directory launch the various programs i have defined
in my rc.conf file.
I have Freebsd 7 Release installed on my laptop and the dhcp client works
unstably with WIRELESS connection. It does not get ip unless the dhcp server
on the router is restarted. I am kind of sure this is the problem with
freebsd as I installed ubuntu and windows xp on the same laptop with no
Jerry McAllister wrote:
to rc.conf i see things getting evaluated, but nothing is launched. this
forces someone to log in locally to the machine and start openssh so i
can get to the box.
Are there startup scripts for these things in rc.d?
Putting something in rc.conf is only setting a flag
2008/4/14, Seth Brundle [EMAIL PROTECTED]:
2008/4/14, Christian Walther [EMAIL PROTECTED]:
On 14/04/2008, Robert Huff [EMAIL PROTECTED] wrote:
Erich Dollansky writes:
this is an English speaking list.
Says who?
The handbook.
I'm sorry, I
On Mon, Apr 14, 2008 at 10:04:21AM -0500, Derek Ragona wrote:
At 09:35 AM 4/14/2008, Jesse Sheidlower wrote:
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Furthermore I'm now physically separate from the machine,
On Mon, Apr 14, 2008 at 9:29 AM, Kris Kennaway [EMAIL PROTECTED] wrote:
Edward Ruggeri wrote:
Recently, I figured to do this with portupgrade. Now, I don't allow
root login, so I log in as a user in the wheel group and use su. Now,
as root, I run: dtach -A portupgrade -a. It starts
2008/4/14, Christian Walther [EMAIL PROTECTED]:
On 14/04/2008, Robert Huff [EMAIL PROTECTED] wrote:
Erich Dollansky writes:
this is an English speaking list.
Says who?
The handbook.
I'm sorry, I ignored the fact that I sent my initial email to the
(int'l, thusly
Edward Ruggeri wrote:
On Mon, Apr 14, 2008 at 9:29 AM, Kris Kennaway [EMAIL PROTECTED] wrote:
Edward Ruggeri wrote:
Recently, I figured to do this with portupgrade. Now, I don't allow
root login, so I log in as a user in the wheel group and use su. Now,
as root, I run: dtach -A portupgrade
On Mon, Apr 14, 2008 at 12:41 PM, Kris Kennaway [EMAIL PROTECTED] wrote:
No. Unless dtach is doing something bizarre I cannot think of a reason
this would be happening.
Kris
Maybe I simply over-sentimentalized the old days of updating the portsdb.
Sincerely,
-- Ned Ruggeri
Em Dom, 2008-04-13 às 04:14 +0300, Giorgos Keramidas escreveu:
On Sat, 12 Apr 2008 17:20:17 +0200, Michaël Le Barbier [EMAIL PROTECTED]
wrote:
Hi folks,
a few years ago, I tried to use FreeBSD's make under GNU/Linux, and
thanks to `jpd' on c.u.b.f.misc, I managed to build FreeBSD
On Mon, Apr 14, 2008 at 12:01:22PM -0500, Derek Ragona wrote:
Jesse Sheidlower wrote:
My helper did successfully log in as root over the console,
and rebooted the server. However, all of my above problems are
still the case: I cannot log in as root over ssh (OK, you
addressed this), or by
I am trying to build the neccesary files for the stevens/rago APUE.2e book on
FreeBSD 7.0
as instructed i get the source from here: http://www.apuebook.com/src.tar.gz
unzip untar to:
/home/seamus/apue.2e
cd /home/seamus/apue.2e
amend Make.defines.freebsd as instructed so:
On Mon, Apr 14, 2008 at 10:35:03AM -0400, Jesse Sheidlower wrote:
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Furthermore I'm now physically separate from the machine, and
have been relying on a
On Sun, Apr 13, 2008 at 07:18:52PM -0600, Eric wrote:
tomasz dereszynski wrote:
Eric wrote:
hello,
does anyone know what I can do to fix the following problem? Every
time my FreeBSd 6.2 machine reboots, none of the scripts in the
/usr/local/etc/rc.d directory launch the various
At 11:30 AM 4/14/2008, Jesse Sheidlower wrote:
On Mon, Apr 14, 2008 at 10:04:21AM -0500, Derek Ragona wrote:
At 09:35 AM 4/14/2008, Jesse Sheidlower wrote:
I've recently installed FreeBSD 7.0 on a new server. I seem to
be unable to log in as root in any way, and I'm not sure why.
Hello
I came across your details and hope you will not see this as junk mail; if
so, please do accept my apologies.
We at www.uktradestreet.com can offer you a complimentary service in that
we have genuine customers - both commercial and domestic who would need your
services and as such
On Mon, Apr 14, 2008 at 01:16:45PM -0400, Jerry McAllister wrote:
Well, the two things I would guess are: there is a syntax error in
adding your regular id to the wheel group and you are typing in the
root password incorrectly.
In ancient times I had IRIX lock out a user because there was a
Jeremy Messenger [EMAIL PROTECTED] wrote: On Sun, 13 Apr 2008 15:56:11 -0500,
Dino Vliet
wrote:
Jeremy Messenger wrote: On Sat, 12 Apr 2008 14:45:47
-0500, Dino Vliet
wrote:
Folks,
I've tried to upgrade my ports and get the following error from
gnome-applets everytime I do a
Jeremy Messenger [EMAIL PROTECTED] wrote: On Sun, 13 Apr 2008 15:56:11 -0500,
Dino Vliet
wrote:
Jeremy Messenger wrote: On Sat, 12 Apr 2008 14:45:47
-0500, Dino Vliet
wrote:
Folks,
I've tried to upgrade my ports and get the following error from
gnome-applets everytime I do a
On Monday 14 April 2008 18:48:58 Brother Seamus wrote:
I am trying to build the neccesary files for the stevens/rago APUE.2e book
on FreeBSD 7.0
snip
I get the following error:
+
pracct.c ../lib/libapue.a
pracct.c: In function 'main':
pracct.c:31:
just a note: same source code makes fine on solaris installation.
I would appreciate if somebody else running freebsd 7.0 could download source
and see if it makes fine on their installation.
Steven's Advance Programming in the Unix Environment Source code:
http://www.apuebook.com/src.tar.gz
Frank Shute wrote:
I spotted a couple of things with your rc.conf that could be causing
you trouble:
1) There are a lot of unquoted YES's for enabling services. I don't
know if that could screw thing's up but for form's sake, I'd try quoting
them and rebooting.
2) You seem to have set your
Seth Brundle wrote:
(That set aside: I'm deeply impressed by the fact that list members
translated my erraneous posting -- this is VERY friendly and shows the
BSD communities superiority, if I might say so. Thanks again! :)
w00t!!
That's Internet for Thanks, Erich, and I concur with Seth's
On Mon, 14 Apr 2008 13:28:40 -0500, Dino Vliet [EMAIL PROTECTED]
wrote:
Ok thanks for the suggestions,
I've started with Yelp but am getting this error when doing a make
install distclean.
[EMAIL PROTECTED] /usr/ports/x11/yelp]# make install distclean
=== Building for yelp-2.22.1
gmake
Eric Zimmerman wrote:
Frank Shute wrote:
I spotted a couple of things with your rc.conf that could be causing
you trouble:
1) There are a lot of unquoted YES's for enabling services. I don't
know if that could screw thing's up but for form's sake, I'd try quoting
them and rebooting.
2) You
I have a production server running FreeBSD 7.0-RELEASE, and it has
stability issues. The problem is that after a crash, it takes quite a
while to get back up and running. Most of the time is spent doing a file
system check on a 500GB USB drive with a single UFS partition. I noticed
that my var,
On Mon, 14 Apr 2008 13:36:18 -0500, Dino Vliet [EMAIL PROTECTED]
wrote:
I've continued with the seahorse problem. In /usr/ports/UPDATING I
couldn't find anything regarding seahorse!
The gnome-keyring-manager is in /usr/ports/MOVED for gnome-keyring-manager
- seahorse. For some reason,
Andy Christianson wrote:
I have a production server running FreeBSD 7.0-RELEASE, and it has
stability issues. The problem is that after a crash, it takes quite a
while to get back up and running. Most of the time is spent doing a file
system check on a 500GB USB drive with a single UFS
Hi Mel,
Thanks for your reply - very insightful - i have beendelving into the c library
files - which is after all why i am readingthis book, though still at the
beginning 8).
On the pracct.c source file I have found it sufficient just to change line 31
from
struct acct
On Fri, 2008-04-11 at 22:13 +0200, Mel wrote:
On Friday 11 April 2008 16:42:57 Shelby Cain wrote:
Why does factory settings not include scanning the built-in system
library path /usr/lib? From the man page, it would seem that if I truly
wanted to remove all runtime information I'd want
I'm using the FreeBSD SMB/CIFS layer for authentication to remote
Windows shared resources in a domain ( smbutil(1), mount_smbfs(8),
nsmb.conf(5) ). I've ran into the following situation:
1. Listing the password literally (in the clear) in nsmb.conf allows
me to authenticate against the Windows
On Monday 14 April 2008 21:45:32 Andy Christianson wrote:
Is there a way to have the file system
check for the partition that resides on the USB drive follow this same
behavior?
man tunefs, specifically, it needs to be ufs2 partitioned. Good telltale if it
is ufs2 is the precense of a .snap
On Mon, 14 Apr 2008 22:12:52 +0200
Mel [EMAIL PROTECTED] wrote:
On Monday 14 April 2008 21:45:32 Andy Christianson wrote:
Is there a way to have the file system
check for the partition that resides on the USB drive follow this
same behavior?
man tunefs, specifically, it needs to be
Hello,
I tried running the script suggested by mel and after that I was able to see
that some of those packages got registered as installed.
However some of the packages were not being found and as an example I saw
the following:
Restoring doodle-0.6.6_1
Failed: cannot find doodle-0.6.6_1 in
On Monday 14 April 2008 22:02:22 Brother Seamus wrote:
Hi Mel,
Thanks for your reply - very insightful - i have beendelving into the c
library files - which is after all why i am readingthis book, though still
at the beginning 8).
On the pracct.c source file I have found it sufficient just
Hi folks,
(I'm a relative newcomer to all this... thanks for your patience help.)
I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP
server. It has 2 drives - one for the OS and the other for the FTP
storage. My question is about the storage drive in this case.
You
At 03:27 PM 4/14/2008, Dharma Wolford wrote:
Hi folks,
(I'm a relative newcomer to all this... thanks for your patience help.)
I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP
server. It has 2 drives - one for the OS and the other for the FTP
storage. My question
On Mon, Apr 14, 2008 at 01:27:24PM -0700, Dharma Wolford wrote:
Hi folks,
(I'm a relative newcomer to all this... thanks for your patience help.)
I've installed FreeBSD 6.2 on a system that will be primarily used as an FTP
server. It has 2 drives - one for the OS and the other for the
This platform is returning a bogus value for the main temperature sensor
using the ipmi(4) module in 6.3/amd64:
# ipmitool -V
ipmitool version 1.8.8
# ipmitool sdr
Temp | -54 degrees C | cr
Planar Temp | 30 degrees C | ok
That value should probably be an absolute
Peter Boosten [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote:
I am looking for a driver for the VIA VNT6656G6A40 54 MBps Wireless USB
Module to run on FreeBSD 7.0 i386. This is a daughterboard built around the
VIA 6656 chipset. Two VIA drivers are listed in /boot/defaults/loader.conf
On Monday 14 April 2008 18:36:30 Derek Ragona wrote:
At 03:27 PM 4/14/2008, Dharma Wolford wrote:
Hi folks,
(I'm a relative newcomer to all this... thanks for your patience help.)
I've installed FreeBSD 6.2 on a system that will be primarily used as an
FTP server. It has 2 drives - one
On 0, Manolis Kiagias [EMAIL PROTECTED] wrote:
Patsy wrote:
snip
I do not wish to take my website down and so I was hoping somebody would
be able to tell me if it is possible to throttle apache's upload speed. It
seems that this would provide a good solution - people will need to wait a
I'm getting an undefined reference to strndup, so clearly there's a
header somewhere with it - doesn't seem to be in my default libc,
however on 7.0-amd64?
Thanks,
Steve
___
freebsd-questions@freebsd.org mailing list
On Tuesday 15 April 2008 00:15:45 David Kaye wrote:
Just as a side note for anyone S'ing the FA's, when I ran:
#pkg_add -r mod_cband
it pulled down a version of mod_cband compiled for Apache 2.0, with Apache
2.0 therefore being a dependancy, it was pulled down as well. After I
removed 2.0,
On Tuesday 15 April 2008 00:43:24 Steve Franks wrote:
I'm getting an undefined reference to strndup, so clearly there's a
header somewhere with it - doesn't seem to be in my default libc,
however on 7.0-amd64?
roken.h
openssl/buffer.h as BUF_strndup.
And no, there's no strndup.
--
Mel
On Mon, 14 Apr 2008 15:43:24 -0700, Steve Franks [EMAIL PROTECTED] wrote:
I'm getting an undefined reference to strndup, so clearly there's a
header somewhere with it - doesn't seem to be in my default libc,
however on 7.0-amd64?
I don't see an strndup() function in our libc.
[EMAIL
On Mon, Apr 14, 2008 at 3:38 PM, Mario Lobo [EMAIL PROTECTED] wrote:
If you issue the command:
fdisk -I /dev/da1
-I Initialize sector 0 slice table for one FreeBSD slice covering
the entire disk.
and then: ls /dev/da1*
you'll get:
/dev/da1
/dev/da1s1
which I
Hi,
I need to work on some files and directories that have spaces in them like:
interesting story\2008 March\{story one,story two}.
When using find with -exec, part of the file/directory name will be
missing and therefore lead to error.
What should I do to put escape key in there to include
On Tuesday 15 April 2008 01:06:24 Giorgos Keramidas wrote:
On Mon, 14 Apr 2008 15:43:24 -0700, Steve Franks [EMAIL PROTECTED]
wrote:
I'm getting an undefined reference to strndup, so clearly there's a
header somewhere with it - doesn't seem to be in my default libc,
however on 7.0-amd64?
While it seems like a cool function name, what's the point of having it?
If you know how much you want to copy, it's trivial to allocate a buffer
large enough and strlcpy() into it. If you don't know how much you want
to copy, then strdup() is ok anyway :)
Granted. It's just one more
Simon Gao wrote:
I need to work on some files and directories that have spaces in them like:
interesting story\2008 March\{story one,story two}.
When using find with -exec, part of the file/directory name will be missing
and therefore lead to error.
What should I do to put escape key
On Monday 14 April 2008 12:25:14 Victor M. Blood wrote:
On 14.04.2008, Da Rock wrote:
On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
Hi, All.
Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv
On Mon, Apr 14, 2008 at 04:08:11PM -0700, Dharma Wolford wrote:
On Mon, Apr 14, 2008 at 3:38 PM, Mario Lobo [EMAIL PROTECTED] wrote:
If you issue the command:
fdisk -I /dev/da1
-I Initialize sector 0 slice table for one FreeBSD slice covering
the entire disk.
On Mon, Apr 14, 2008, Simon Gao wrote:
Hi,
I need to work on some files and directories that have spaces in them like:
interesting story\2008 March\{story one,story two}.
When using find with -exec, part of the file/directory name will be
missing and therefore lead to error.
Generally it's
On Mon, 14 Apr 2008 16:27:42 -0700, Steve Franks [EMAIL PROTECTED] wrote:
While it seems like a cool function name, what's the point of having it?
If you know how much you want to copy, it's trivial to allocate a buffer
large enough and strlcpy() into it. If you don't know how much you want
On Tue, 15 Apr 2008 01:26:40 +0200, Mel [EMAIL PROTECTED] wrote:
On Tuesday 15 April 2008 01:06:24 Giorgos Keramidas wrote:
On Mon, 14 Apr 2008 15:43:24 -0700, Steve Franks [EMAIL PROTECTED]
wrote:
I'm getting an undefined reference to strndup, so clearly there's a
header somewhere with it
gang,
there's just something about kmail/kontact that grabs me the
wrong way. on my ubuntu server where gnome is my wm, i use
BOTH KDE and GNome, and use evo[gnome is my default]
here on my primary computer i chose kde. i know the 2 are
I have two terminal programs - cutecom and minicom, both built from
ports with no tweaks. Minicom will fire up and hit the serial port
just fine, but cutecom can't open it except with sudo. I tried
tweaking devfs.conf (as well as a straight chmod on /dev/cuad0), and
it doesn't seem to rectify
On Mon, Apr 14, 2008 at 8:22 PM, Gary Kline [EMAIL PROTECTED] wrote:
gang,
there's just something about kmail/kontact that grabs me the
wrong way. on my ubuntu server where gnome is my wm, i use
BOTH KDE and GNome, and use evo[gnome is my default]
Hi guys,
I'm trying to install skype on freebsd 7.0-stable, but I can't find out what I'm
missing. I found several procedures on the web, but none of them was really
efficient to get it working. I thnk I have know severa linux_base installation,
maybe it could be the problem, so how to fix
On Tue, 15 Apr 2008 01:35:48 +
Sébastien Morand [EMAIL PROTECTED] wrote:
Hi guys,
I'm trying to install skype on freebsd 7.0-stable, but I can't find out what
I'm
missing. I found several procedures on the web, but none of them was really
efficient to get it working. I thnk I have
On Tue, 2008-04-15 at 01:30 +0200, Danny Pansters wrote:
On Monday 14 April 2008 12:25:14 Victor M. Blood wrote:
On 14.04.2008, Da Rock wrote:
On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote:
Hi, All.
Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use
On Mon, 14 Apr 2008 16:39:23 -0700
Bill Campbell [EMAIL PROTECTED] wrote:
On Mon, Apr 14, 2008, Simon Gao wrote:
Hi,
I need to work on some files and directories that have spaces in
them like:
interesting story\2008 March\{story one,story two}.
When using find with -exec, part of the
I've been using Diigo and thought you might like to try it out. Here's
an invitation to create an account and connect with me on Diigo.
[1]most wanted ([EMAIL PROTECTED]) is a member of Diigo and would
like to send you an invitation.
To accept this invitation and register for
On Monday 14 April 2008, Eduardo Cerejo said:
On Tue, 15 Apr 2008 01:35:48 +
Sébastien Morand [EMAIL PROTECTED] wrote:
Hi guys,
I'm trying to install skype on freebsd 7.0-stable, but I can't
find out what I'm missing. I found several procedures on the web,
but none of them was
95 matches
Mail list logo
